Open Access Open Access  Restricted Access Subscription Access

Control Method for Electric Fuses with Controllable Fusing


Affiliations
1 Department of Power Engineering, Gheorghe Asachi Technical University of Iasi, Romania
 

In order to improve the electric fuse features, a new concept of controllable fusing has been patented. The controllable fusing means the possibility of fuse to operate at certain time moments when an external command is activated. The experimental set up has been built on the basis of a virtual instrument application. Using this instrument, there is the possibility to acquire the current waveform which flows through the fuse and set the current threshold when a command signal is provided in order to blow the fuse on the basis of controllable fusing effect. Actually, there is implemented the time-current characteristic of the new fuse, and depending on the application the moment of circuit interruption can be delayed. It results an adjusted new time-current characteristic for the fuse.

Keywords

Electric Fuse, Control Method, Virtual Instrument
User

  • Wright A, and Newbery P G (2004). Electric Fuses, Chapter 3, London: IEE.
  • Nairne E (1774). Electrical Experiments by Mr. Edward Nairne, of London, Mathematical instrument-maker, made with a machine of his own workmanship, a description of which is prefixed, philosophical transactions, vol 64, 79–89.
  • McEwan P, and Nairne E (1996). FRS – Discoverer of the electric fuse?, Perspektywy Rozwoju Technik Przerywania Pradu Gdansk, vol 2, 24–31.
  • Metcalf A (1939). A new fuse phenomenon, Beama Journal, vol 44, 109–112 and 151–152.
  • Westrom A, Crooks W R et al. (1981). Current limiting fuses –a comparative evaluation, 9th IEEE Power Engineering Society, vol PER-2(7), 25–26.
  • Leach J G (1985). New application flexibility for medium–voltage current–limiting fuses, IEEE Transaction on Industry Applications, vol IA21(4), 1075–1080.
  • Narancic V, Braunovic M et al. (1979). The composite fuse –a new technology for current limiting fuses, 7th IEEE Power Engineering Society Transmission and Distribution Conference and Exposition, 462–470.
  • Gómez J, Tourn D et al. (1991). Investigation of the pre-arcing behavior of dissimilar uniform double element CAD techniques, Fourth International Conference on Electric Fuses and their Applications (Nottingham), 65–70.
  • Rosen P (1983). Full-range fusing – a new concept in system protection, Electrical Review, vol 213, 33–41.
  • Miura H, Takaoka N et al. (1979). New dual-element current limiting power fuse with full protection capability against any fault current, IEEE Transaction on Power Apparatus and Systems, vol PAS-98, 1885–1894.
  • Wolny A, Stokes A D et al. (1994). High-voltage behavior with varistor commutation, IEE Proceedings Generation, Transmission and Distribution, vol(1)141, 3337–3345.
  • Bucher T (1982). Encapsulated current limiting fuses: grounded-front design, IEEE Transaction on Power Apparatus and Systems, vol PAS-101(7), 1975–1978.
  • Itoh T (1973). Design considerations on the ppf for a control center, IEEE Transaction on Power Apparatus and Systems, vol PAS-92(4), 1292–1297.
  • Gundlach H (1977). A self-restoring current-limiting device, 3rd International Symposium on Switching Arc Phenomena (Poland), 287–292.
  • Muth H, Zimmermann K et al. (1938). Sicherungen im Maschennetzbetrieb, ETZ, vol 59, 1257–1261.
  • Brukner P (1958). A new type of switching device with extremely short breaking time, ETZ, vol 33, 1137–1146
  • Martin D (1990). Smart fuses enter with a small bang, Electrical Review, vol 7.
  • Aubrey D (1974). New 11kV expulsion fuses for overhead lines, Electrical Times, 50–56.
  • Barrow D R, Howe A F et al. (1991). The chemistry of electric fuse arcing, IEE Proceedings A, Science Measurement and Technology, vol 138(1), 83–88.
  • Agarwal M S, Stokes A D et al. (1987). Pre-arcing behaviour of open fuse wire, Journal of Physics D: Applied Physics, vol 20, No. 10, 1237–1242.
  • Plesca A (2002). Protection device for power semiconductors, Patent RO 117882.
  • Plesca A (2002). Modular fuse for protection of installations with semiconductors, Patent RO 117953.
  • Plesca A (2005). Overcurrents protection device, Patent RO 119396.
  • Plesca A (2005). Special cartridge for HRC fuses, Patent RO 120107.
  • Plesca A (2005). Special fast fuse for power semiconductors protection, Patent RO 120108.
  • Plesca A, and Leonte P (2006). Special fuse for power rectifier, Patent RO 120436.
  • Chiriac G (2012). Thermal analysis of fuses with variable cross-section fuselinks, Electric Power Systems Research, vol 92, 73– 80.
  • Cantemir L, Nituca C et al. (2011). Unconventional current collection from a contact line for electric traction vehicles, International Conference on Pantograph Catenary Interaction Framework for Intelligent Control, Amiens, France.

Abstract Views: 456

PDF Views: 0




  • Control Method for Electric Fuses with Controllable Fusing

Abstract Views: 456  |  PDF Views: 0

Authors

Adrian T. Plesca
Department of Power Engineering, Gheorghe Asachi Technical University of Iasi, Romania

Abstract


In order to improve the electric fuse features, a new concept of controllable fusing has been patented. The controllable fusing means the possibility of fuse to operate at certain time moments when an external command is activated. The experimental set up has been built on the basis of a virtual instrument application. Using this instrument, there is the possibility to acquire the current waveform which flows through the fuse and set the current threshold when a command signal is provided in order to blow the fuse on the basis of controllable fusing effect. Actually, there is implemented the time-current characteristic of the new fuse, and depending on the application the moment of circuit interruption can be delayed. It results an adjusted new time-current characteristic for the fuse.

Keywords


Electric Fuse, Control Method, Virtual Instrument

References





DOI: https://doi.org/10.17485/ijst%2F2013%2Fv6i7%2F34351