Open Access
Subscription Access
The Analysis of the Influence of Structural Parameters on Static and Dynamic Properties of Sliding Bearings with a Floating Ring Bearing
Turbochargers structure developments i.e. work of rotating sets in turbochargers with higher rotational speed imposes more on bearing knots. The recommended values of parameters in this paper were introduced to describe bearings with floating rings. The authors used computational examples to show the influence of presented ranges of a relative clearance of the inner bearing and quotients of radial clearances on work parameters of a sliding bearing with a floating ring such as: relative eccentricities, oil films maximum temperatures, oil films maximum pressures, oil films minimal heights, a journal velocity quotient and a floating ring as well as amplitudes of displacements of floating rings in bearing knots of a rotating set in a turbocharger.
Keywords
Turbocharger, Rotating Unit, Oil Film Force, Adiabatic Model, Eccentricity Ratio
User
Information
- Buluschek B (1980) Das Schwimmbüchsenlager bei stationärem Betrieb. Diss. ETH, 1-87.
- Domes B (1980) Amplituden der Unwucht–und Selbsterregen Schwingungen Hochtouriger mit Rotierenden und nichtrotierenden Schwimmenden Büchsen. Diss. Universität Karlsruhe, 47-141.
- Krause R (1987) Experimentelle Untersuchung eines dynamisch beanspruchten Schwimmbüchsenlagers. ETH Zürich. 1-66.
- Mazurkow A (1993) Termohydrodynamiczna teoria smarowania i statyczne charakterystyki ślizgowego łożyska poprzecznego z panewką pływającą. Praca doktorska. Politechnika Rzeszowska, Rzeszów. 1-77.
- Mazurkow A (2008) Checking calculations of sliding bearing with floating ring bearings. The Archive of Mechanical Engineering. 5. zeszyt 3, 200-210.
- Mazurkow A (2008) The research of dynamic qualities of rotating sets in turbochargers. Scientific Problems of Machines Operation & Maintenance. 2(154), 93-104.
- Mazurkow A (2009a) Właściwości statyczne i dynamiczne , metoda projektowania łożysk ślizgowych z panewką pływającą. Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów. 93-104.
- Mazurkow A. (2009b) The researches of rotating sets in turbochargers, the influence of relative width of sliding bearings with a floating ring on static and dynamic properties. J. Kones Powertrain & Transport. 16(2), str. 91-96.
- Mazurkow A (2009c) The researches of rotating sets in turbochargers, the influence of relative clearance in sliding bearings with a floating ring on static and dynamic properties. Scientific Problems Mach. Oper. & Maintenance. 1(157), str.19-28.
- Świderski W (1995) Właściwości adiabatycznego filmu olejowego w poprzecznych łożyskach ślizgowych. Zeszyty Naukowe, Politechnika Łódzka, Łódź. 706, 125-134.
Abstract Views: 420
PDF Views: 87