Indian Journal of Science and Technology

Open Access Open Access  Restricted Access Subscription Access

Production of Various Chemicals from Nyamplung Oil with Catalytic Cracking Process


Affiliations
1 Department of Chemical Engineering, Adhi Tama Surabaya Institute of Technology, Indonesia
2 Department of Chemistry, Malang State University, Indonesia
3 Department of Electrical Engineering, Adhi Tama Surabaya Institute of Technology, Indonesia
4 Department of Design and Manufacturing Engineering, Shipbuilding State Polytechnic (PPNS), Indonesia
 

Objectives: To obtained data about chemicals that formed at Nyamplung oil cracking and also to study the effect of temperature on product composition. Methods/Statistical Analysis: The method of analysis used is Gas-Chromatography and Mass Spectrometry (GCMS). The resulting product is analyzed and studied in the temperature influence of Nyamplung oil process with Zn-HZSM-5/γ Alumina catalyst. Furthermore, the compounds obtained are grouped. The chemicals produced are grouped as biogasoline, biokerosene, biodiesel and other materials based on the amount of carbon and functional groups on the compound. Findings: Oil of Nyamplung can be cracked to produce chemicals of alkanes, alkenes, carboxylic acids, benzene and its derivatives and aldehide. The chemicals are also grouped into 3 kinds of biofuel namely biodiesel, biogasoline and biokeresene. Biodiesel composition is higher than biogasoline and biokerosene in Nyamplung oil cracking product. Application/Improvements: The highest composition of chemicals from Nyamplung oil cracking is oleic acid with a content of 41.19% wt
User

  • Fadhlullah M, Widiyanto SNB, Restiawatya E. The potential of Nyamplung (Calophyllum inophyllum L.) seed oil as biodiesel feedstock: Effect of seed moisture content and particle size on oil yield. Energy Procedia. 2015; 68:177–85. https://doi.org/10.1016/j.egypro.2015.03.246

  • Press Release of Ministry of Forestry of the Republic of Indonesia Number: S. 428/II/ PIK-1/2008, 1st Ed. 2008. p. 1–10.

  • Budianto A, Sumari S, Udyani K. Biofuel production from Nyamplung oil using catalytic cracking process with zn-hzsm-5/γ alumina catalyst. 2006.

  • Budiyati E, Etnanta FN. Investigation of the catalyst type effect on biodiesel production from Nyamplung seed oil and ethanol. Proceeding of the 1st International Conference on Engineering Technology and Industrial Application; Indonesia. 2014. p. 69–73.

  • Dewajani H, Rochmadi, Purwono S, Budiman A. Catalytic cracking of Indonesian Nyamplung oil (Calophyllum inophyllum) for bio-fuels production using ZSM-5 catalyst. Journal of Engineering Science and Technology. 2015. p. 61–9.

  • Dewajani H, Rochmadi, Purwono S, Budiman A. Effect of modification ZSM-5 catalyst in upgrading quality of Organic Liquid Product derived from catalytic cracking of Indonesian Nyamplung oil (Calophyllum inophyllum). AIP Conference Proceedings. 2016; 1755(1):050002. https://doi.org/10.1063/1.4958485

  • Budianto A, Prajitno DH, Roesyadi A, Budhikarjono K. HZSM-5 catalysts for cracking palm oil to biodiesel: A comparative study with and without Pt and Pd impregnation. Scientific Study and Research Chemistry and Chemical Engineering, Biotechnology, Food Industry. 2014; 15(1):11081–090.

  • Budianto A, Prajitno DH, Budhikarjono K. Biofuel production from candlenut oil using catalytic cracking process with Zn/HZSM-5 catalyst. ARPN Journal of Engineering and Applied Sciences. 2014; 9(11):2121–4.


Abstract Views: 202

PDF Views: 0




  • Production of Various Chemicals from Nyamplung Oil with Catalytic Cracking Process

Abstract Views: 202  |  PDF Views: 0

Authors

Agus Budianto
Department of Chemical Engineering, Adhi Tama Surabaya Institute of Technology, Indonesia
Sumari Sumari
Department of Chemistry, Malang State University, Indonesia
Wahyu Setyo Pambudi
Department of Electrical Engineering, Adhi Tama Surabaya Institute of Technology, Indonesia
Wahyudi
Department of Design and Manufacturing Engineering, Shipbuilding State Polytechnic (PPNS), Indonesia

Abstract


Objectives: To obtained data about chemicals that formed at Nyamplung oil cracking and also to study the effect of temperature on product composition. Methods/Statistical Analysis: The method of analysis used is Gas-Chromatography and Mass Spectrometry (GCMS). The resulting product is analyzed and studied in the temperature influence of Nyamplung oil process with Zn-HZSM-5/γ Alumina catalyst. Furthermore, the compounds obtained are grouped. The chemicals produced are grouped as biogasoline, biokerosene, biodiesel and other materials based on the amount of carbon and functional groups on the compound. Findings: Oil of Nyamplung can be cracked to produce chemicals of alkanes, alkenes, carboxylic acids, benzene and its derivatives and aldehide. The chemicals are also grouped into 3 kinds of biofuel namely biodiesel, biogasoline and biokeresene. Biodiesel composition is higher than biogasoline and biokerosene in Nyamplung oil cracking product. Application/Improvements: The highest composition of chemicals from Nyamplung oil cracking is oleic acid with a content of 41.19% wt

References