Indian Journal of Science and Technology

Open Access Open Access  Restricted Access Subscription Access

Design and Performance of Resonant Spacing Linear Patch Array with Mitered Bend Feed Network for Wireless Applications


Affiliations
1 Department of Electronics and Communication Engineering, DVR and Dr. HS MIC College of Technology, Kanchikacherla –521180, Andhra Pradesh, India
2 Department of Electronics and Communication Engineering, Andhra University College of Engineering (AUCE), Visakhapatnam – 530003, Andhra Pradesh, India
3 Department of Electronics and Communication Engineering, Maharaj Vijayaram Gajapathi Raj (MVGR) College of Engineering (Autonomous), Vizianagaram – 535005, Andhra Pradesh, India
 

Objective: This research paper focuses on the simulated design and its analysis of 2 element microstrip patch antenna arrays with Quarter wave transformer feed and mitered bend feed network that is widely used in ISM frequency bands in the field of wireless communications. Methods: Various types of microstrip array antennas using Quarter wave transformer feed and with miter bend feeds are designed using HFSS 13.0 and fabricated by photolithography technique using FR-4 substrate, which is tested using VNA E5071C. Findings: The optimum performance of the feeding system is based on various antenna parameters. Here 1X2 array antennas are designed. Miter bends are used for better impedance matching. Usage of miter bends declines the reflection coefficient. There is improvement in gain by using miter bend feed network. Applications: Good impedance matching, optimum reflection coefficient and high gain are achieved by metered bends. The obtained results show that the designed antenna is an apt tool for communications.

Keywords

Corporate Feed, HFSS, Microstrip Antenna, Mitered-Bend Feed, Quarter-Wave Feed Transformer, Reflection Coefficient, WLAN
User

Abstract Views: 131

PDF Views: 0




  • Design and Performance of Resonant Spacing Linear Patch Array with Mitered Bend Feed Network for Wireless Applications

Abstract Views: 131  |  PDF Views: 0

Authors

D. Prabhakar
Department of Electronics and Communication Engineering, DVR and Dr. HS MIC College of Technology, Kanchikacherla –521180, Andhra Pradesh, India
P. Mallikarjuna Rao
Department of Electronics and Communication Engineering, Andhra University College of Engineering (AUCE), Visakhapatnam – 530003, Andhra Pradesh, India
M. Satyanarayana
Department of Electronics and Communication Engineering, Maharaj Vijayaram Gajapathi Raj (MVGR) College of Engineering (Autonomous), Vizianagaram – 535005, Andhra Pradesh, India

Abstract


Objective: This research paper focuses on the simulated design and its analysis of 2 element microstrip patch antenna arrays with Quarter wave transformer feed and mitered bend feed network that is widely used in ISM frequency bands in the field of wireless communications. Methods: Various types of microstrip array antennas using Quarter wave transformer feed and with miter bend feeds are designed using HFSS 13.0 and fabricated by photolithography technique using FR-4 substrate, which is tested using VNA E5071C. Findings: The optimum performance of the feeding system is based on various antenna parameters. Here 1X2 array antennas are designed. Miter bends are used for better impedance matching. Usage of miter bends declines the reflection coefficient. There is improvement in gain by using miter bend feed network. Applications: Good impedance matching, optimum reflection coefficient and high gain are achieved by metered bends. The obtained results show that the designed antenna is an apt tool for communications.

Keywords


Corporate Feed, HFSS, Microstrip Antenna, Mitered-Bend Feed, Quarter-Wave Feed Transformer, Reflection Coefficient, WLAN



DOI: https://doi.org/10.17485/ijst%2F2017%2Fv10i31%2F158404