The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off


In wireless communication system, the supply voltage should be as low as possible to increase operation time of the system. This shows how importance the low-power circuits are in this field. Recently, there has been considerable interest in the use of Fin type Field Effect Transistor (FinFET) technology to implement RF components such as low-noise amplifiers (LNAs), mixers, and voltage-controlled oscillators (VCOs). VCOs are critical building blocks in modern wireless communication system which is mainly used in Phase Locked Loop. This work describes designing and simulation of Double Gate (DG) FinFET based Inductor (L) and Capacitor (C) tank VCO and the radiation effect of single event transient (SET) on the topology. The LC VCO topology is implemented with 30 nm DG-FinFET technology with 1V as DC power supply voltage which oscillates at 32.61 GHz frequency, results the VCO draws 64.97 μA current and an average power consumption of 64.97 μW. The measured phase noise of the topology is -120.54dBc/Hz at 1 GHz offset frequency and Figure of Merit (FOM) is - 162.68 dBc/Hz at 1 GHz offset frequency.

Keywords

DG-FinFET, Figure of Merit, Low Power, Phase noise, Single Event Transient (SET), Voltage Control Oscillator.
User