Indian Journal of Science and Technology

Open Access Open Access  Restricted Access Subscription Access

Experimental Investigation of Friction and Wear Properties for Glass/Carbon Hybrid Fiber Reinforced with Epoxy Resin


Affiliations
1 Department of Mechanical Engineering, KPR Institute of Engineering and Technology, SF.No: 204/2 and 204/4, Kollupalayam , Arasur, Coimbatore - 6410407, Tamil Nadu, India
2 Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore - 641008, Tamil Nadu, India
 

Friction and wear properties of glass/carbon hybrid fiber weave reinforced with epoxy resin are reported in this experimental study. The tribological properties are investigated using a pin-on-disk test apparatus which measures coefficient friction and wear rate. The experiments are conducted at various loads and sliding distance at constant velocity 5m/s, the purpose is to compare the performance at different sliding conditions. It is found that the wear rate is increased by increasing the carbon content, but the co-efficient of friction decreases by increasing the carbon percentage in the composite.

Keywords

Friction, Co-Efficient of Friction, Hybrid Fiber, Pin-on-Disk Apparatus, Wear, Wear Rate.
User

Abstract Views: 128

PDF Views: 0




  • Experimental Investigation of Friction and Wear Properties for Glass/Carbon Hybrid Fiber Reinforced with Epoxy Resin

Abstract Views: 128  |  PDF Views: 0

Authors

P. Sureshkumar
Department of Mechanical Engineering, KPR Institute of Engineering and Technology, SF.No: 204/2 and 204/4, Kollupalayam , Arasur, Coimbatore - 6410407, Tamil Nadu, India
R. Ramamoorthi
Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore - 641008, Tamil Nadu, India
N. Babu
Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore - 641008, Tamil Nadu, India

Abstract


Friction and wear properties of glass/carbon hybrid fiber weave reinforced with epoxy resin are reported in this experimental study. The tribological properties are investigated using a pin-on-disk test apparatus which measures coefficient friction and wear rate. The experiments are conducted at various loads and sliding distance at constant velocity 5m/s, the purpose is to compare the performance at different sliding conditions. It is found that the wear rate is increased by increasing the carbon content, but the co-efficient of friction decreases by increasing the carbon percentage in the composite.

Keywords


Friction, Co-Efficient of Friction, Hybrid Fiber, Pin-on-Disk Apparatus, Wear, Wear Rate.



DOI: https://doi.org/10.17485/ijst%2F2016%2Fv9i42%2F124367