Indian Forester

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of Heat Treatment on Decay Resistance of Pinus Roxburghii Wood against Decaying Fungi


Affiliations
1 Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun, India
     

   Subscribe/Renew Journal


The aim of the present study was to determine the effect of heat treatment on fungal resistance of chir pine (Pinus o roxburghii) wood. Heat treatment of wood was done at three different temperatures (160, 180 and 210 C) for 0.5, 3, 5, and 24 h in vacuum oven under N atmosphere. Fungal resistance was determined by exposing the heat treated 2 specimens to wood decaying fungi, Oligoporus placentus (brown rot) and Trametes versicolor (white rot) through soil block bioassay test in the laboratory. Heat treatment showedremarkable protection to chir pine wood against both the test fungi. It was also observed that heat treatment showed the greater resistance against white-rot as compared to brown rot.

Keywords

Heat Treatment, Pinus Roxburghii, Oligoporus Placentus, Trametes Versicolor.
Font Size

User
About The Authors

Ashish Kumar Kashyap
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun
India

Sadhna Tripathi
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun
India

Himani Pant
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun
India


Subscription Login to verify subscription
Notifications

  • Bakshi, B.K., Puri, Y.N. and Singh, S. (1967). Natural decay resistance of Indian timbers. I. Introduction and method. II. Decay resistance of sal (Shorea robusta Gaertn.) and teak (Tectona grandis L.f.). Indian Forester, 93:305–328.

  • Boonstra, M., Van Acker, J, Kegel, E., and Stevens, M. (2007). Optimisation of a two stage heat treatment process. Durability aspects. Wood Science and Technology, 41(1): 31-57.

  • Bourgois, J. and Guyonnet, R. (1988). Characterisation and analysis of terrified wood. Wood Science and Technology, 22: 143-155.

  • Dirol, D. and Guyonnet, R. (1993). The improvement of wood durability by rectification process, Document No. IRG/WP 98-40015. International Research Group on Wood Protection, Stockholm, Sweden.

  • Esteves, B.M., Domingos, I.J. and Pereira, H.M. (2008). Pine wood modification by heat treatment in air. Bio Resources, 3(1): 142-154.

  • Hakkou, M., Petrissans, M., Gerardin, P. and Zoulalian, A. (2006). Investigations of the reasons for fungal durability of heat-treated beech wood. Polymer Degradation and Stability, 91:393-397.

  • IS: 4873. (2008). Methods of laboratory testing of wood preservatives against fungi- part-I (Second revision). Bureau of Indian standards, 9, Bahadur Shah Zafar Marg, New Delhi, India.

  • Jamsa, S. and Viitaniemi, P. (2001). Heat treatment of wood. Better durability without chemicals. In: Proceedings of COST E22 environmental optimization of wood protection. Antibes, France. pp. 21-26.

  • Kamdem, D.P., Pizzi, A. and Jermannaud, A. (2002). Durability of heat-treated wood. Holz als Roh- und Werkstoff, 60: 1-6.

  • Mazela, B., Zakrzewski, R., Grzeskowiak, W., Cofta, G., and Bartkowiak, M. (2003). Preliminary research on the biological resistance of thermally modified wood, In: Abstracts of the First European Conference on Wood Modification, 113-119, 3-4 April, Ghent, Belgium.

  • Panshin, A.J. and Carl De Zeeuw (1970). Textbook of wood technology, Mc. Graw Hill Book Company. New York. 1: 338-395.

  • Santos, J.A. (2000). Mechanical behaviour of Eucalyptuswood modified by heat. Wood Science and Technology, 34: 39-43.

  • Viitaniemi, P. (1997). ThermoWood – Modified wood for improved performance.In: Proceedings of wood the ecological material the 4th Euro-wood symposium. Stockholm, Sweden. Sep. 22-23 1997 Tratek Rapport. 9709084. pp. 67-69.

  • Windeisen, E., Strobel, C., and Wegner, G. (2007). Chemical changes during the production of thermo-treated beech wood. Wood Science and Technology, 41: 523-536.


Abstract Views: 366

PDF Views: 0




  • Effect of Heat Treatment on Decay Resistance of Pinus Roxburghii Wood against Decaying Fungi

Abstract Views: 366  |  PDF Views: 0

Authors

Ashish Kumar Kashyap
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun, India
Sadhna Tripathi
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun, India
Himani Pant
Wood Preservation Discipline, Wood Processing Division Forest Research Institute, Dehradun, India

Abstract


The aim of the present study was to determine the effect of heat treatment on fungal resistance of chir pine (Pinus o roxburghii) wood. Heat treatment of wood was done at three different temperatures (160, 180 and 210 C) for 0.5, 3, 5, and 24 h in vacuum oven under N atmosphere. Fungal resistance was determined by exposing the heat treated 2 specimens to wood decaying fungi, Oligoporus placentus (brown rot) and Trametes versicolor (white rot) through soil block bioassay test in the laboratory. Heat treatment showedremarkable protection to chir pine wood against both the test fungi. It was also observed that heat treatment showed the greater resistance against white-rot as compared to brown rot.

Keywords


Heat Treatment, Pinus Roxburghii, Oligoporus Placentus, Trametes Versicolor.

References