Indian Journal of Innovations and Developments

Open Access Open Access  Restricted Access Subscription Access

Dolly Shaped Patch Antenna with Enhanced Bandwidth Implementing Reactive Impedance Surface and L Shaped Slots on Ground for UMTS (SATCOM) Application


Affiliations
1 Dept. of Electronics & Communication Engineering, Annamalai University, Chidambaram, India
 

Background /Objective: In the recent past Reactive Impedance Surface is used to increase the bandwidth of the patch antenna by antenna designers. The aim is to design a compact antenna using RIS for UMTS spectra.

Methods/Statistical analysis: RIS are effectively used in the design of the proposed antenna (which is made Compact) to increase bandwidth.

Findings: The proposed antenna has superior radiating features due to slots in its ground plane. It resonates at 2.18 GHz having a gain of 4.6 dB.

Applications: This antenna finds application in UMTS (SATCOM).


Keywords

Microstrip Patch Antenna, Compactness, Miniaturization, Linear Polarization, Wireless Application, Band Width Enhancement, UMTS, SATCOM.
User
Notifications

  • W.L. Stutzman, G.A. Thiele. Antenna Theory and Design. Wiley. New York. 1998.

  • Gourav Misra, Arun Agarwal, Kabita Agarwal. Design and performance evaluation of microstrip antenna for ultra-wideband applications using microstrip feed. American Journal of Electrical and Electronic Engineering. 2015; 3(4), 93-99.

  • Vinod Kumar Singh, Arvind K Singh, Rajmani Yadav, Ravi Kant. Design & Analysis of bandwidth of microstrip patch antenna for DCS/UMTS application. Advance physics letter. 2014; 1(2), 43-6.

  • K.P. Ray, G. Kumar. Broadband microstrip antennas. Archtech House. 2003.

  • R. Garg, P. Bhartia, I. Bahl, A. Ittipiboon. Microstrip antenna design handbook. Artech House London. 2001.

  • L. Benard, G. Chertier, R. Sauleau. Wideband circularly polarized patch antennas on reactive impedance substrates. IEEE Antennas & Wireless Propagation Letters. 2011; 10, 1015-1018.

  • R. Gayathri, M. Anitha, Athrish Mukerjee, K. K .Sood, R. Jyoti. Dual Band, miniaturized, enhanced-gain patch antennas using differentially-loaded metastructures. Indian Journal of Science and Technology. 2015; 8(1), 11-16.

  • D.Yuandan, H.Toyao, T. Itoh. Design and characterization of miniaturized patch antennas loaded with complementary split ring resonators. IEEE Transactions on Antennas & Propagation. 2012; 60(2), 772-785.

  • Gayathri Rajaraman, K. Parthiban, M. Ramaswamy. Dual band miniaturized patch antenna for WLAN, WIMAX applications using spiral meta component. International Journal of Scientific Research in Science Engineering and Technology. 2016; 2(2), 1086-1089.

  • Vendor specification. http://www.roundsolutions.com. Date accessed: 2015


Abstract Views: 232

PDF Views: 0




  • Dolly Shaped Patch Antenna with Enhanced Bandwidth Implementing Reactive Impedance Surface and L Shaped Slots on Ground for UMTS (SATCOM) Application

Abstract Views: 232  |  PDF Views: 0

Authors

R. Gayathri
Dept. of Electronics & Communication Engineering, Annamalai University, Chidambaram, India
A. Gayathri
Dept. of Electronics & Communication Engineering, Annamalai University, Chidambaram, India

Abstract


Background /Objective: In the recent past Reactive Impedance Surface is used to increase the bandwidth of the patch antenna by antenna designers. The aim is to design a compact antenna using RIS for UMTS spectra.

Methods/Statistical analysis: RIS are effectively used in the design of the proposed antenna (which is made Compact) to increase bandwidth.

Findings: The proposed antenna has superior radiating features due to slots in its ground plane. It resonates at 2.18 GHz having a gain of 4.6 dB.

Applications: This antenna finds application in UMTS (SATCOM).


Keywords


Microstrip Patch Antenna, Compactness, Miniaturization, Linear Polarization, Wireless Application, Band Width Enhancement, UMTS, SATCOM.

References