Dnyanamay

Open Access Open Access  Restricted Access Subscription Access

Literature Review of Brushless Direct Current Motors Topologies and its Applications


Affiliations
1 PES's Modern college of Engineering, Shivajinager Pune - 05, Maharashtra, India
 

In industrial applications and electric vehicles BLDC (Motors) are being used. This paper represents categorization of BLDC motor and applications. Preliminary design of AFM as well as RFM BLDC motor along with mathematically design equations further implemented to form generalized flowchart.

Keywords

Brushless Direct Current (BLDCB) Motor, Axial Flux Machine, Radial Flux Machine.
User
Notifications
Font Size

  • R. Civilian and D. Stupak. 1995. Disk drive employing multi mode spindle drive system. US patent 5471353, Oct 3.

  • G.H. Jang and M.G. Kim. 2005. A BipolarStartingand Unipolar-Running Method to Drive an HDD Spindle Motor at High Speed withLargeStartingTorque.IEEETransactions on Magnetics. 41(2): 750-755, Feb.

  • E. Grochowski and R.F. Hyot. 1996. Future trends in hard disk drives. IEEE Tran. On Magnetics. 32(3):1850-1854, May.

  • J.D. Ede, Z.Q. Zhu and D. Howe. 2001. Optimal split ratio control for high speed permanent magnet brushless DC motors. In 5th Proceeding

  • S.X. Chen, M.A.Jabbar, O.D. Zhang and Z.J. Lie.1996. New Challenge: Electromagnetic design of BLDC motors for high speed fluid film bearing spindles used in hard disk drives. IEEE Trans.Magnetics. l32(5): 3854-3856.

  • D.C.Hanselman,”Brushless permanentmotor design,” New York: McGraw-Hill,1994.

  • F. Chimento and A. Raciti, “A low-speed axial-flux PM generator for wind power systems,” IEEE International Symposium on Industrial Electronics, 2004., vol. 2, May 2004, pp. 1479–1484.

  • A. Cavagnino, M. Lazzari, F Profumo, A. Tenconi, “A comparison between the axial flux and the radial flux structures for PM synchronous motors”, Industry Applications, IEEE Transactions on. Volume 38, Issue 6, Nov.-Dec. 2002 Page(s):1517 - 1524

  • F.Caricchi, F. Crescimbini, E. Santini, C Santucci, “Influence of the radialvariation of the magnet pitch in slotless permanent magnet axial flux motor” Industrial Application Conference, 1997.

  • Jacek F. Gieras, Ron-Jie Wang, Maarten J. Kamper, Axial Flux Permanent Magnet Brushless Machine, Kluwer Academic Publishers,Nederland, 2004.

  • M. Aydin, S. Huang and T.A. Lipo, “Torque Quality and Comparison of Internal and External Rotor Axial Flux Surface Magnet Disc Machine”,IEEE IECON2001, 27th Annual Conference of IEEE Industrial Electronics, Denver, CO, Nov 29-Dec, 2001

  • Amruta Patki, “Design, Fabrication and Control of anAxial Flux Type BLDC motor” M.Tech. thesis, Dept. Elect. Eng., Nagpur Univ., Nagpur, Maharashtra, 2014.

  • Sreeju S Nair, ShamsuddeenNalakath, Member, IEEE, and SamrajJabezDhinagar, Member, IEEE,“Design and Analysis of Axial Flux Permanent Magnet BLDC Motor for Automotive Applications”,IEEE International Electric Machines and drives conference(IEMDC),2011

  • Wu, L.J., Zhu, Z.Q., Staton, D., et al.: ‘Comparison of analytical models for predicting electromagnetic performance in surface-mounted permanent magnet machines’. IEEE Vehicle Power and Propulsion Conf. (VPPC), 2010, pp. 1–6

  • Wu, L.J., Zhu, Z.Q., Staton, D., et al.: ‘An improved subdomain model for predicting magnetic field of surface-mounted permanent magnet machines accounting for tooth-tips’, IEEE Trans. Magn., 2011, 47, (6), pp. 1693–1704.

  • Hak-In Lee and Myounggyu D. Noh, Member, IEEE “Optimal Design of RadialFlux Toroidally Wound Brushless DC Machines”, IEEE Transactions on Industrial Electronics Vol. 58, NO. 2, Feb 2011.

  • Amit N.Patel, Nirav Patel, Pranay Patel “Genetic Algorithm Based Multi-Objective Design Optimization of Radial Flux PMBLDC Motor”.

  • O. Safdarzadeh, M. Mahdavyfakhr, E. Afjei ,“An Adaptive Algorithm for PMBL Motor Design ”, 8th Power Electronics, Drive Systems & Technologies Conference (PEDSTC 2017).

  • Anurag Khergade, B. Bodkhe Closed Loop Control of Axial Flux Permanent Magnet BLDC Motor for Electric Vehicles 978-1-5090-0128-6/16/ ©2016 IEEE

  • Soma sundaram B , Ashok Kumar L , Banu Rekha B , Hemanand R, “Study On Energy Efficiency and Harmonics Mitigation In A HVAC Ahu Blower/Fan Application Using Electronically Commutated BLDC Motors”, Journal of Electrical Engineering.

  • Ohio Electric Motors. “Brushless DC Motors Used in Industrial Applications”. Ohio Electric Motors.2012.

  • Shimon Y.Nof, Wilbert E. Wilhelm and Hans-Jurgen Warnecke. “Industrial assembly” Springer,1997

  • M. Gopal. Control Systems: principles and design.2nd ed. Tata McGraw-Hill, 2002.

  • R.Al Zaher, S.de Gischolar_main, H.Polinder, P.Wieringa, “Comparison of An Axial Flux And A Radial Flux Permanent Magnet Motor For Solar Race Cars”,International Conference on Electrical Machines- ICEM 2010.


Abstract Views: 130

PDF Views: 91




  • Literature Review of Brushless Direct Current Motors Topologies and its Applications

Abstract Views: 130  |  PDF Views: 91

Authors

S. D. Joshi
PES's Modern college of Engineering, Shivajinager Pune - 05, Maharashtra, India
N. R. Kulkarni
PES's Modern college of Engineering, Shivajinager Pune - 05, Maharashtra, India

Abstract


In industrial applications and electric vehicles BLDC (Motors) are being used. This paper represents categorization of BLDC motor and applications. Preliminary design of AFM as well as RFM BLDC motor along with mathematically design equations further implemented to form generalized flowchart.

Keywords


Brushless Direct Current (BLDCB) Motor, Axial Flux Machine, Radial Flux Machine.

References