Journal of Surface Science and Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Improvement in the Tribological Properties of AISI D2 Die Steel by DLC and WC-C Coatings


Affiliations
1 School of Mechanical and Building Sciences, Vellore Institute of Technology, Chennai – 600127, Tamil Nadu, India
2 School of Advanced Sciences, Vellore Institute of Technology, Chennai – 600127, Tamil Nadu, India
     

   Subscribe/Renew Journal


Wear in machineries and parts are one of the major problems encountered in industrial processes. These problems along with corrosion lead to the development of surface engineering techniques that involves applying surface coatings to components to obtain composite material with tribological properties unattainable by base material alone. In the present paper, DLC and WC coatings are produced on AISI D2 steel by Physical Vapor Deposition (PVD).The samples are characterized with tribological test. The applied load is taken as 25 Newton, and sliding velocity as 0.5 m/s. Samples with DLC coatings display less friction and good hardness.

Keywords

Diamond like Carbon, D2 Steel, Friction, Physical Vapor Deposition, Wear.
Subscription Login to verify subscription
User
Notifications
Font Size


  • F. Clarysse, W. Lauwerens and M. Vermeulen, Wear, 264, 400 (2008). https://doi.org/10.1016/j.wear.2006.08.031

  • T. W. ScharfandS. V. Prasad, J. Mater. Sci ., 48, 511 (2013). https://doi.org/10.1007/s10853-012-7038-2

  • C. Wang, B. Guo, D. Shan andX. Bai, J. Mater. Process Tech.,213, 323 (2013). https://doi.org/10.1016/j.jmatprotec.2012.10.011

  • A. GhiottiaandS.Bruschi,Wear, 271, 2454 (2011). https://doi.org/10.1016/j.wear.2010.12.043

  • Z. Hu, A.Schubnov and F.Vollertsen, J. Mater. Process. Tech., 212, 647 (2012). https://doi.org/10.1016/j.jmatprotec.2011.10.012

  • L. Nobili and L. Magagnin,Trans.NonFerrous Met.Soc. China,19, 810 (2009). https://doi.org/10.1016/S1003-6326(08)60355-6

  • J.Vetter,Surf, Coating Tech., 257, 213 (2014). https://doi.org/10.1016/j.surfcoat.2014.08.017

  • M.Madej, Wear, 317, 179 (2014). https://doi.org/10.1016/j.wear.2014.05.008

  • M. Murakawa, N. Koga and S. Takeuchi, Trans. ASME.121, 674 (1999).

  • U. Pettersson and S. Jacobson, Tribol. Lett, 17, 553 (2004).

  • Naresh R., Aman A., Gupta A., Sivarajan S. Advances in Materials and Metallurgy. Lect. Notes Mech Eng. Springer, Singapore (2019).


Abstract Views: 274

PDF Views: 1




  • Improvement in the Tribological Properties of AISI D2 Die Steel by DLC and WC-C Coatings

Abstract Views: 274  |  PDF Views: 1

Authors

S. Sivarajan
School of Mechanical and Building Sciences, Vellore Institute of Technology, Chennai – 600127, Tamil Nadu, India
R. Padmanabhan
School of Mechanical and Building Sciences, Vellore Institute of Technology, Chennai – 600127, Tamil Nadu, India
Arun Kumar Sharma
School of Advanced Sciences, Vellore Institute of Technology, Chennai – 600127, Tamil Nadu, India

Abstract


Wear in machineries and parts are one of the major problems encountered in industrial processes. These problems along with corrosion lead to the development of surface engineering techniques that involves applying surface coatings to components to obtain composite material with tribological properties unattainable by base material alone. In the present paper, DLC and WC coatings are produced on AISI D2 steel by Physical Vapor Deposition (PVD).The samples are characterized with tribological test. The applied load is taken as 25 Newton, and sliding velocity as 0.5 m/s. Samples with DLC coatings display less friction and good hardness.

Keywords


Diamond like Carbon, D2 Steel, Friction, Physical Vapor Deposition, Wear.

References





DOI: https://doi.org/10.18311/jsst%2F2019%2F20110