International Journal of Electronics and Communication Engineering

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

A Simple Method to Improve the Throughput of a Multiplier


Affiliations
1 Asst. Professor, Dept. of ECE, SRK Institute of technology, Enikepadu, Vijayawada-512108, Andhra Pradesh, India
     

   Subscribe/Renew Journal


In this paper a simple method to improve the throughput of multipliers was presented. The method used is the double precision. In this method the operands of the multiplier will be made into narrow width operands. Hence the power dissipation and throughput of the multipliers will be improved. Here we will also describe how to apply this new method to the familiar multipliers such as Booth and Baugh-wooley. The proposed algorithm will be modeled using VHDL. Then the performance of these multipliers is compared with each other.

Keywords

Double Throughput, Reduced Power Consumption, Double Precision, Modified-booth, Baugh-wooley, Final Adder
Subscription Login to verify subscription
User
Notifications
Font Size


  • M. Sjalander, P.Larsson-Edefors, “Multiplication Acceleration through Twin Precision”, IEEE Trans. VLSI Systems, vol. 17, no.9, pp. 1233-1246, September 2009.

  • A. D. Booth, “A signed binary multiplication technique,” Quarterly J.Mechan. Appl. Math., vol. 4, no. 2, pp. 236–240, 1951.

  • H. Eriksson, P. Larsson-Edefors, M. Sheeran, M. Själander, D. Johansson, and M. Schölin, “Multiplier reduction tree with logarithmic logic depth and regular Connectivity,” in Proc. IEEE Int. Symp. Circuits Syst. (ISCAS), May 2006, pp.4–8.

  • C. R. Baugh and B. A. Wooley, “A two’s complement parallel array multiplication algorithm,” IEEE Trans. Comput., vol. 22, pp. 1045–1047, Dec. 1973

  • M. Sjalander, H. Eriksson, and P. Larsson-Edefors, “An efficient twin-precision multiplier,” in Proc. IEEE Int. Conf. Comput. Des. Oct.2004,pp. 30-33.


Abstract Views: 463

PDF Views: 3




  • A Simple Method to Improve the Throughput of a Multiplier

Abstract Views: 463  |  PDF Views: 3

Authors

Naga Mani Mendu
Asst. Professor, Dept. of ECE, SRK Institute of technology, Enikepadu, Vijayawada-512108, Andhra Pradesh, India

Abstract


In this paper a simple method to improve the throughput of multipliers was presented. The method used is the double precision. In this method the operands of the multiplier will be made into narrow width operands. Hence the power dissipation and throughput of the multipliers will be improved. Here we will also describe how to apply this new method to the familiar multipliers such as Booth and Baugh-wooley. The proposed algorithm will be modeled using VHDL. Then the performance of these multipliers is compared with each other.

Keywords


Double Throughput, Reduced Power Consumption, Double Precision, Modified-booth, Baugh-wooley, Final Adder

References