Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Comparison of Dimensions of Commercially Available Tractor Drawn Rigid Cultivator Tines


Affiliations
1 Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur, (Rajasthan), India
2 Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur (Rajasthan), India
     

   Subscribe/Renew Journal


Commercially available agricultural machines are not matching with standards which affect the performances. Many times, commercially available rigid cultivator tines used in tractor drawn cultivator do not match in dimensions as given in respective BIS code. A study conducted in Udaipur, Rajasthan revealed that out of four such tines only one tine T1 fulfilled the requirement of BIS code 7565:1975 whereas maximum deviation was observed for tine T2.

Keywords

Rigid Cultivator, Tines, Hole Diameter, Hole Center To Center Distance
Subscription Login to verify subscription
User
Notifications
Font Size


  • Darmora, D.P. and Pandey, K.P. (2006).Performance evaluation of shovel type furrow opener of a seed cum fertilizer drill in sandy soils. J. Agricultural Engineering,43(1):74-77.
  • Jangid, B.L., Intodia, S.L. and Regar, P.L.(2010).Status of Farm Power and Machinery and Promotion of Farm Mechanization in Southern Rajasthan.Agric. Engg. Today, 34(4): 18-23.
  • Marakoglu, T. and Carman, K.(2009).Effects of design parameters of cultivator share on draft force and soil loosening in soil bin. J. Agronomy, 8(1): 21-26.
  • Mehta, C.R., Chandel, N.S., Jena, P.C. and Anamika, J. (2019). Indian agriculture counting on farm mechanization. Agricultural Mechanization Asia, Africa & Latin America, 50(1):84-89.
  • Singh, G. (2005).Agricultural Machinery Industry in India (Manufacturing, marketing and mechanization promotion), Indian Council of Agricultural Research, New Delhi.
  • Yadav, A., Sharma, A.K. and Yadav, A.(2018).Comparison of dimensions of commercially available reversible shovels of fixed tine cultivator. Internat. J. Agric. Sci.,10(9):0975-9107.
  • WEBLOGRAPHY
  • Anonymous (2020).Radius of curvature calculation.https:// www.easycalculation.com/area/length-of-arc.php.

Abstract Views: 596

PDF Views: 0




  • Comparison of Dimensions of Commercially Available Tractor Drawn Rigid Cultivator Tines

Abstract Views: 596  |  PDF Views: 0

Authors

C. Naveen Kumar
Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur, (Rajasthan), India
Ajay Kumar Sharma
Department of Farm Machinery and Power Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur (Rajasthan), India

Abstract


Commercially available agricultural machines are not matching with standards which affect the performances. Many times, commercially available rigid cultivator tines used in tractor drawn cultivator do not match in dimensions as given in respective BIS code. A study conducted in Udaipur, Rajasthan revealed that out of four such tines only one tine T1 fulfilled the requirement of BIS code 7565:1975 whereas maximum deviation was observed for tine T2.

Keywords


Rigid Cultivator, Tines, Hole Diameter, Hole Center To Center Distance

References