International Journal of Agricultural Engineering

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Development and Evaluation of a Multipurpose Tool Bar for Mini Tractor Suitable for the Cropping Pattern of Middle Gujarat Region


Affiliations
1 Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India
     

   Subscribe/Renew Journal


A mini tractor drawn multipurpose tillage tool has been developed by Anand Agricultural University suitable for seed bed preparation at wapsa conditions under sandy loam soil of middle Gujarat Agro-climatic zone in a single operation. The implement consisting of iron ploughs for tillage and clod crusher for breaking clods which is useful for preparation of seed bed in a single pass with a saving of about 20% in the cost of the operation as compared to the cultivator. Therefore, it is recommended for farmers of the region to prepare the seedbed by using the developed implement.

Keywords

Mini Tractor, Multipurpose, Tillage Tool, Clod Crusher.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Bukhari, S., Bhutto, M.A., Baloch, J.M., Bhutto, A.B. and Mirani, A.N. (1988). Performance of selected tillage implements. Agric. Mechanization Asia, Africa & Latin America, 19(4) : 9 – 14.

  • Chandegara,V.K. (2003). Design and developing of bullock drawn multipurpose implement for sandy loam soil. J. Agric. Engg., 40(4) : 22-26.

  • Gebregziabher, S., Mounem, M.A., Brussel, V., Ramon, H., Nyssen, H., Verplancke, J., Behailu, H.M., Jozef, D. and Josse, D.B. (2006). Animal drawn tillage, the Ethiopian and plough, maresha: A review. Soil & Tillage Res.,89(2):129-143.

  • Guruswami, T. (1986). Cultivator an efficient implement in dry land agriculture. Agric. Engg. Today, 10 (4) : 15-17.

  • Karthikeyan, C., Vceraragavathatham, D., Karpagam, D. and Firdouse, S. A. (2009). Traditional tools in agricultural practices. Indian J. Traditional Knowledge, 8(2): 212-217.

  • Kumar, V.J.F. and Manian, R. (1986). Tractor-drawn combination tillage tool, Agric. Mechanization Asia, Africa & Latin America, 17(1) : 31-36.

  • Mohammadhossein, R., Amin, W. and Hoshang R. (2012). Energy efficiency of different tillage systems in forage corn production. Internat. J. Agric. & Crop Sci.,4 (22) : 1644-1652.

  • Nayak, V. K. and Verma, A. (2012). Performance evaluation of animal drawn multipurpose tool carrier for tillage and Biasi operations. Internat. J. Agric. Engg., 5(2) : 254-259.

  • Pacharne, M.M., Savle, S.R., Sanglikar, R.V. and Pacharne, D.T. (2009). Development of ‘V’ blade harrow. Internat. J. Agric. Engg., 2 (2) : 266-269.

  • Sharma, D.N., Kataria, D.P. and Bahl, V.P. (2001). On farm trials of tractor drawn multicrop ridge-furrow and flat bed seeding machine for rain fed and irrigated conditions. J. Agric. Engg., 3 (1) : 24-33.

  • Singh, K.P., Singh, B. and Singh, T.P. (2002). Performance Evaluation of powered harrow plough in comparison to other tillage systems in silt-clay loam soil. J. Agric. Engg., 39(1) : 40-48.

  • Thierstein, G.E. and Bansal, R.K. (1988). The anmal-drawn wheeled tool carrier, International Crops Research Institute for the Semi-Arid Tropics Information Bulletin no-8.

  • Veerangouda, M., Anantachar, M. and Er. Sushilendra (2011). Development and evaluation of multipurpose tool carrier for power tiller. Karnataka J. Agric. Sci., 24 (5) : 704-705.


Abstract Views: 179

PDF Views: 0




  • Development and Evaluation of a Multipurpose Tool Bar for Mini Tractor Suitable for the Cropping Pattern of Middle Gujarat Region

Abstract Views: 179  |  PDF Views: 0

Authors

Kapil Mandloi
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India
R. Swarnkar
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India
Yagnik C. Yoganandi
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India
Parth Patel
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India
K. L. Dabhi
Department of Farm Machinery and Power Engineering, College of Agricultural Engineering and Technology (A.A.U.), Godhra (Gujarat), India

Abstract


A mini tractor drawn multipurpose tillage tool has been developed by Anand Agricultural University suitable for seed bed preparation at wapsa conditions under sandy loam soil of middle Gujarat Agro-climatic zone in a single operation. The implement consisting of iron ploughs for tillage and clod crusher for breaking clods which is useful for preparation of seed bed in a single pass with a saving of about 20% in the cost of the operation as compared to the cultivator. Therefore, it is recommended for farmers of the region to prepare the seedbed by using the developed implement.

Keywords


Mini Tractor, Multipurpose, Tillage Tool, Clod Crusher.

References