Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Designing of supplementary controller for statcom for mitigation of sub-synchronous resonance in series compensated power system


Affiliations
1 Electrical Engineering Department, Bharat Institute of Technology, Meerut - 250103, India
2 Electrical Engineering Department, Delhi Technological University, Delhi - 110042, India
     

   Subscribe/Renew Journal


In FACTS devices supplementary signals are widely used to enhance damping and mitigation of Subsynchronous Resonance in Power System. Subsynchronous Resonance occurs due to series capacitor in the Power Systems. High value of series capacitive reactance may destabilize low frequency mode which is more dangerous. In this paper modeling of STATCOM with IEEE first benchmark model is presented. Then a supplementary signal is developed which is capable to make the system stable for all critical values of series compensation. The eigenvalues are presented for all four critical values of series compensation.

Keywords

STATCOM, supplementary signals, power system stability, IEEE first benchmark model.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 223

PDF Views: 0




  • Designing of supplementary controller for statcom for mitigation of sub-synchronous resonance in series compensated power system

Abstract Views: 223  |  PDF Views: 0

Authors

Vipin Jain
Electrical Engineering Department, Bharat Institute of Technology, Meerut - 250103, India
Narendra Kumar
Electrical Engineering Department, Delhi Technological University, Delhi - 110042, India

Abstract


In FACTS devices supplementary signals are widely used to enhance damping and mitigation of Subsynchronous Resonance in Power System. Subsynchronous Resonance occurs due to series capacitor in the Power Systems. High value of series capacitive reactance may destabilize low frequency mode which is more dangerous. In this paper modeling of STATCOM with IEEE first benchmark model is presented. Then a supplementary signal is developed which is capable to make the system stable for all critical values of series compensation. The eigenvalues are presented for all four critical values of series compensation.

Keywords


STATCOM, supplementary signals, power system stability, IEEE first benchmark model.



DOI: https://doi.org/10.33686/prj.v10i4.189440