Refine your search
Collections
Co-Authors
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Zhang, Xin
- Removing TCE and PCE of Groundwater with Iron-Carbon Micro-Electrolysis
Abstract Views :156 |
PDF Views:0
Authors
Affiliations
1 College of Civil Engineering and Architecture, Liaoning University of Technology, 121001 Jinzhou, CN
1 College of Civil Engineering and Architecture, Liaoning University of Technology, 121001 Jinzhou, CN
Source
Nature Environment and Pollution Technology, Vol 15, No 3 (2016), Pagination: 1005-1008Abstract
The iron-carbon (Fe/C) micro-electrolysis method was used to dispose trichloroethylene (TCE) and tetrachloroethylene (PCE) of polluted groundwater, and several factors such as the mass ratio of Fe/C, the characteristics of activated carbon, the particle size of iron powder and influent pH were investigated. The optimal conditions were acquired. The mass ratio of Fe/C was 1:1, coconut shell charcoal and 30-mesh iron powder were used, and influent pH was 5. Under the optimal conditions, mixed solution of TCE and PCE was treated by Fe/C micro-electrolysis method and the tests got 82.4% of the TCE removal rate and 59.4% of the PCE removal rate.Keywords
Groundwater, Trichloroethylene, Tetrachloroethylene, Micro-Electrolysis.References
- Cheng, S. F. and Wu, S. C. 2000. The enhancement methods for the degradation of TCE by zero-valent metals. Chemosphere, 41(8): 1263-1270.
- Erto, A., Lancia, A. and Musmarra, D. 2011. A modelling analysis of PCE/TCE mixture adsorption based on ideal adsorbed solution theory. Separation and Purification Technology, 80(1): 140-147.
- Farrell, J., Kason, M., Melitas, N. and Li, T. 2000. Investigation of the longterm performance of zero-valent iron for reductive dechlorination of trichloroethylene. Environmental Science & Technology, 34(3): 514-521.
- Jin, Y. Z., Zhang, Y. F. and Li, W. 2003. Micro-electrolysis technology for industrial wastewater treatment. J. of Environmental Sciences, 15(3): 334-338.
- Kao, C. M. and Lei, S. E. 2000. Using a peat biobarrier to remediate PCE/TCE contaminated aquifers. Water Research, 34(3): 835-845.
- Lakshmipathiraj, P., Raju, G. B., Sakai, Y., Takuma, Y., Yamasaki, A., Kato, S. and Kojima, T. 2012. Studies on electrochemical detoxification of trichloroethene (TCE) on Ti/IrO 2-Ta2O5 electrode from aqueous solution. Chemical Engineering Journal, 198: 211-218.
- Luo, J., Song, G., Liu, J., Qian, G. and Xu, Z. P. 2014. Mechanism of enhanced nitrate reduction via micro-electrolysis at the powdered zerovalent iron/activated carbon interface. Journal of Colloid and Interface Science, 435: 21-25.
- Miyake, Y., Sakoda, A., Yamanashi, H., Kaneda, H. and Suzuki, M. 2003. Activated carbon adsorption of trichloroethylene (TCE) vapor stripped from TCE-contaminated water. Water Research, 37(8): 1852-1858.
- Ning, X. A., Wen, W., Zhang, Y., Li, R., Sun, J., Wang, Y. and Liu, J. 2015. Enhanced dewaterability of textile dyeing sludge using micro-electrolysis pretreatment. Journal of Environmental Management, 161: 181-187.
- Obiri-Nyarko, F., Grajales-Mesa, S. J. and Malina, G. 2014. An overview of permeable reactive barriers for in situ sustainable groundwater remediation. Chemosphere, 111: 243-259.
- Su, Y. F., Cheng, Y. L. and Shih, Y. H. 2013. Removal of trichloroethylene by zerovalent iron/activated carbon derived from agricultural wastes. Journal of Environmental Management, 129: 361-366.
- Wang, Y. P., Wang, L. J., Peng, P. Y. and Lu, T. H. 2006. Treatment of naphthalene derivatives with iron-carbon micro electrolysis. Transactions of Nonferrous Metals Society of China, 6(6): 1442-1447.
- Wust, W. F., Kober, R., Schlicker, O. and Dahmke, A. 1999. Combined zero-and first-order kinetic model of the degradation of TCE and cisDCE with commercial iron. Environmental Science & Technology, 33(23): 4304-4309.
- Yeh, H. C. and Kastenberg, W. E. 1991. Health risk assessment of biodegradable volatile organic chemicals: a case study of PCE, TCE, DCE and VC. Journal of Hazardous Materials, 27(2): 111-126.
- Yi-zhongii, J. I. N., Yue-feng, Z. H. A. N. G. and Wei, L. 2003. Microelectrolysis technology for industrial wastewater treatment. Journal of Environmental Sciences, 15(3): 334-338.
- Zhang, L., Zhang, L. and Li, D. 2015. Enhanced dark fermentative hydrogen production by zero-valent iron activated carbon micro-electrolysis. International Journal of Hydrogen Energy, 40(36): 12201-12208.
- Coupled Thermo-Hydro-Mechanical Modelling of Carbon Dioxide Sequestration in Saline Aquifers Considering Phase Change
Abstract Views :212 |
PDF Views:73
Authors
Weiyong Lu
1,
Xin Zhang
2
Affiliations
1 School of Mines, Luliang University, Lvliang, Shanxi 033000, CN
2 School of Minerals and Energy Resources Engineering, Faculty of Engineering, University of New South Wales, Sydney NSW 2052, AU
1 School of Mines, Luliang University, Lvliang, Shanxi 033000, CN
2 School of Minerals and Energy Resources Engineering, Faculty of Engineering, University of New South Wales, Sydney NSW 2052, AU
Source
Current Science, Vol 119, No 6 (2020), Pagination: 973-983Abstract
Carbon dioxide (CO2) sequestration in saline aquifers is considered to be one of the most viable measures to control its emissions. During the process of CO2 injection, phase changes of gas, liquid and supercritical CO2 will lead to changes in the density, dynamic viscosity, specific heat capacity and CO2 heat conductivity and solubility in water, which will influence the injection pressure and spatial distribution of CO2. To study the characteristics of injection pressure and spatial distribution of CO2 in saline aquifers, equations of state such as Peng–Robinson equation were used to realize the continuous calculation of the physical property parameters of gas, liquid and supercritical CO2. Based on the continuous physical property parameters, a fully thermo-hydro-mechanical (THM) coupled model was developed and then solved and verified using COMSOL Multiphysics software. It has been shown in this study that: (i) the predicted CO2 injection pressure by the THM coupled model is higher than that obtained from the uncoupled model; (ii) at the top boundary of the reservoir, the spatial distribution of CO2 can be divided into a rapid increase region, a slow decrease region, a rapid decrease region and an initial saturation region along the direction of CO2 migration and (iii) larger the reservoir geothermal gradient, more obvious is the gravity override effect.Keywords
Carbon Dioxide Sequestration, Phase Change, Saline Acquifers, Thermo-Hydro-Mechanical Modelling.References
- Nwachukwu, A., Min, B. and Sriniyasan, S., Model selection for CO2 sequestration using surface deformation and injection data. Int. J. Greenhouse Gas Control, 2017, 56, 67–92.
- Kim, S. and Hosseini, S. A., Study on the ratio of pore-pressure/stress changes during fluid injection and its implications for CO2 geologic storage. J. Pet. Sci. Eng., 2017, 149, 138–150.
- Jiang, P., Li, X. and Xu, R., Thermal modeling of CO2 in the injection well and reservoir at the Ordos CCS demonstration project, China. Int. J. Greenhouse Gas Control, 2014, 23, 135–146.
- Brassard, P., Godbout, S. and Raghavan, V., The production of engineered biochars in a vertical auger pyrolysis reactor for carbon sequestration. Energies, 2017, 10, 288.
- Yin, S., Dusseault, M. B. and Rothenburg, L., Coupled THMC modeling of CO2 injection by finite element methods. J. Pet. Sci. Eng., 2011, 80, 53–60.
- Zhan, J. et al., Decomposition analysis of the mechanism behind the spatial and temporal patterns of changes in carbon bio-sequestration in China. Energies, 2012, 5, 386–398.
- Li, C. and Laloui, L., Coupled multiphase thermo-hydromechanical analysis of supercritical CO2 injection: benchmark for the in Salah surface uplift problem. Int. J. Greenhouse Gas Control, 2016, 51, 394–408.
- Hou, Z., Gou, Y. and Taron, J., Thermo-hydro-mechanical modeling of carbon dioxide injection for enhanced gas-recovery (CO2–EGR): a benchmarking study for code comparison. Environ. Earth Sci., 2012, 67, 549–561.
- Li, J., Chen, A. and Yan, Y., Numerical simulation of carbon dioxide migration in a sandstone aquifer considering the fluid–solid coupling. Acta Geotech., 2014, 9, 101–108.
- Li, Q., Wu, Z. and Bai, Y., Thermo-hydro-mechanical modeling of CO2 sequestration system around fault environment. Pure Appl. Geophys., 2006, 163, 2585–2593.
- Li, S., Li, X. and Zhang, D., A fully coupled thermo-hydromechanical, three-dimensional model for hydraulic stimulation treatments. J. Nat. Gas Sci. Eng., 2016, 34, 64–84.
- Fang, Y., Ba, N. N. and Carroll, K., Development of a coupled thermo-hydro-mechanical model in discontinuous media for carbon sequestration. Int. J. Rock Mech. Min. Sci., 2013, 62, 138– 147.
- Basirat, F., Fagerlund, F. and Denchik, N., Numerical modelling of CO2 injection at small-scale field experimental site in Maguelone, France. Int. J. Greenhouse Gas Control, 2016, 54, 200–210.
- Khan, S., Al-Shuhail, A. A. and Khulief, Y. A., Numerical modeling of the geomechanical behavior of Ghawar Arab-D carbonate petroleum reservoir undergoing CO2 injection. Environ. Earth Sci., 2016, 75, 1499.
- Liu, H., Hou, Z. and Were, P., Numerical investigation of the formation, displacement and caprock integrity in the Ordos Basin (China) during CO2 injection operation. J. Pet. Sci. Eng., 2016, 147, 168–180.
- Du, Z., Lin, W. and Gu, J., Numerical investigation for heat transfer of supercritical CO2 cooled in a vertical circular tube. Heat Transfer Eng., 2012, 33, 905–911.
- Joshi, A., Gangadharan, S. and Leonenko, Y., Modeling of pressure evolution during multiple well injection of CO2 in saline aquifers. J. Nat. Gas Sci. Eng., 2016, 36, 1070–1079.
- Sasaki, K., Fujii, T. and Niibori, Y., Numerical simulation of supercritical CO2 injection into subsurface rock masses. Energy Convers. Manage., 2008, 49, 54–61.
- Aavatsmark, I., Kometa, B. K. and Gasda, S. E., A generalized cubic equation of state with application to pure CO2 injection in aquifers. Comput. Geosci., 2016, 20, 623–635.
- Youssef, Z., Barreau, A. and Mougin, P., Measurements of hydrate dissociation temperature of gas mixtures in the absence of any aqueous phase and prediction with the cubic–plus–association equation of state. J. Chem. Eng. Data, 2010, 55, 2809–2814.
- Peng, D. Y. and Robinson, D. B., A new two-constant equation of state. Ind. Eng. Chem. Fundam., 1976, 15, 92–94.
- Wu, X., Wang, Q. and He, Y., Temperature–pressure field coupling calculation model considering phase behavior change in CO2 injection well borehole. J. China Univ. Pet. (Edn. Nat. Sci.), 2009, 1, 73–77.
- Jossi, J. A., Stiel, L. I. and Thodos, G., The viscosity of pure substances in the dense gaseous and liquid phases. Aiche J., 1962, 1, 59–63.
- Poling, B. E., Prausnitz, J. M. and O’Connell, J. P., The Properties of Gases and Liquids, McGraw-Hill, New York, USA, 2001, 5th edn, pp. 6.1–6.33.
- Guo, X., Rong, S. and Yang, J., The viscosity model based on PR equation of state. Acta Pet. Sin., 1999, 3, 64–69.
- Shi, J., The distribution of temperature and pressure and injection string check of the injection and production wellbore of CO2 flooding. China University of Petroleum-Beijing, Beijing, China, 2009, pp. 12–30.
- Schnepper C. A. and Stadtherr, M. A., Robust process simulation using interval methods. Comput. Chem. Eng., 1996, 20, 187–199.
- Wang, L. and Liu, Y., Simulation on characteristics of supercritical fluid flow in porous media imposed temperature profiles. Chem. React. Eng. Technol., 1996, 20, 187–199.
- Zirrahi, M., Hassanzadeh, H. and Abedi, J., Prediction of CO2 solubility in bitumen using the cubic-plus-association equation of state (CPA-EoS). J. Supercrit. Fluids, 2015, 98, 44–49.
- Chung, F. T., Jones, R. A. and Nguyen, H. T., Measurements and correlations of the physical properties of CO2/heavy-crude-oil mixtures. Spe. Reserv. Eng., 1988, 3, 822–828.
- Kong, X., High Seepage Mechanical, Press of University of Science and Technology of China, Hefei, 2010, pp. 11–79.
- Li, P., Kong, X. and Lu, D., Mathematical modeling of flow in saturated porous media on account of fluid-structure coupling effect. J. Hydrodyn., 2003, 4, 419–426.
- Chen, J., Hopmans, J. W. and Grismer, M. E., Parameter estimation of two-fluid capillary pressure–saturation and permeability functions. Adv. Water Resour., 1999, 22, 479–493.
- Vilarrasa, V., Silva, O. and Carrera, J., Liquid CO2 injection for geological storage in deep saline aquifers. Int. J. Greenhouse Gas Control, 2013, 14, 84–96.
- Vilarrasa, V., Koyama, T. and Neretnieks, I., Shear-induced flow channels in a single rock fracture and their effect on solute transport. Transp. Porous Media, 2011, 87, 503–523.
- Lu, C., Lee, S. Y., and Han, W. S., Comments on ‘abrupt-interface solution for carbon dioxide injection into porous media’ by M. Dentz and D. Tartakovsky. Transp. Porous Media, 2009, 79, 29–37.