Refine your search
Collections
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Nagaraj, Shanmukha
- Single Motor Mechanical Power-Split Transmission for Hybrid Racing Cars
Abstract Views :208 |
PDF Views:111
Authors
Affiliations
1 Dept. of Mech. Engg., R.V. College of Engg., Bengaluru, Karnataka, IN
1 Dept. of Mech. Engg., R.V. College of Engg., Bengaluru, Karnataka, IN
Source
International Journal of Vehicle Structures and Systems, Vol 9, No 3 (2017), Pagination: 199-205Abstract
A hybrid vehicle derives its power from two or more distinct sources such as an internal combustion (IC) engine and an electric motor. Based on the mechanical architecture, Hybrid Electric Vehicles can be divided into three categories: parallel hybrids, series hybrids, and power-split hybrids. Parallel hybrids require frequent role reversal due to restrictions on motor power, whereas series hybrids lead to lower efficiency of the whole power train. The power-split hybrids combine the advantages of these two configurations by using one IC engine and two motors. The main objective of this paper is to design a transmission system for a hybrid racing car which is powered by an IC engine and a single electric motor which are arranged so as to represent a unique power-split system. This configuration reduces the need of one motor and allows seamless transition between engine-only with regeneration mode, motor only mode and parallel mode.Keywords
Hybrid Racing Car, Transmission System, Regeneration, Power-Split System, Gear Box, Finite Element Analysis.- Fabrication, Analysis and Testing of Smart Adaptive Composite Beams
Abstract Views :200 |
PDF Views:99
Authors
Affiliations
1 Dept. of Mech., Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, IN
2 Dept. of Mech., Engg., R V College of Engg., Bengaluru, IN
3 National Aerospace Laboratories, Bengaluru, IN
1 Dept. of Mech., Engg., Amrita School of Engg., Bengaluru, Amrita Vishwa Vidyapeetham, IN
2 Dept. of Mech., Engg., R V College of Engg., Bengaluru, IN
3 National Aerospace Laboratories, Bengaluru, IN
Source
International Journal of Vehicle Structures and Systems, Vol 10, No 5 (2018), Pagination: 332-336Abstract
The presented research involves two types of Smart adaptive composite beams (SAC). The study was conducted on smart composite beams composed of LY5210 and EPOLAM 2063 resin systems respectively. The fabrication of composite beams involved embedding SMA wires in between layers of 0/90 woven glass fibre in the respective resin systems, followed by suitable curing and post curing cycles. Suitable mould was designed and manufactured to facilitate the required pre-straining of SMA wires. Both static and dynamic tests were done on the SAC specimens to study the behaviour of these SACs. Static and free vibration analyses were carried out using MSC Nastran and Hypermesh. There has been good agreement between the results of finite element analysis and the experimental results.Keywords
Smart Composites, Free Vibration, Modal Analysis, Natural Frequencies, Shape Memory Alloys.References
- T.W. Duerig, K.N. Melton, D. Stkel and C.M. Wayman. 1990. Engineering Aspects of Shape-Memory Alloys, Butterworth-Heinemann, Boston.
- V. Birman, K. Chandrashekhara and S. Sain. 1996. An approach to the optimization of shape memory alloy hybrid composite plates subject to low-velocity impact, Composites, Part B, 27, 439-446. https://doi.org/ 10.1016/1359-8368(96)00010-8.
- R. Stalmans, L. Delaey and J. Van Humbeeck. 1997. Modelling of adaptive composite materials with embedded shape memory alloy wires, Mater. Res. Soc. Symp. Proc., 459, 119-130. https://doi.org/10.1557/PROC-459-119.
- S. Marfia, E. Sacco and J.N. Reddy. 2003. Superelastic and shape memory effects for laminated SMA beams, AIAA J., 41(1), 100-109. https://doi.org/10.2514/2.1918.
- S. Marfia and E. Sacco. 2005. Micromechanics and homogenization of SMA-wire-reinforced materials, J. Applied Mechanics, 72(2), 259-268. https://doi.org/10.1115/1.1839186.
- M. Cherkaoui, Q.P. Sun and G.Q. Song. 2000. Micromechanics modelling of composite with ductile matrix and shape memory alloy reinforcement, Int. J. Solids Struct, 37, 1577-1594. https://doi.org/10.1016/S0020-7683(98)00332-1.
- C.S. Jarali and S. Raja. 2008. Homogenization and pseudoelastic behaviour of composite materials reinforced with shape memory alloy fibres, J. Composite Materials, 42, 1685-1707. https://doi.org/10.1177/0021998308092201.
- C.S. Jarali, S. Raja and A.R. Upadhya. 2008. Micromechanical behaviours of SMA composite materials under hydro-thermo-elastic strain fields, Int. J. Solids and Structures, 45, 2399-2419. https://doi.org/10.1016/j.ijsolstr.2007.12.003.
- H.J. Lee, J.J. Lee and J.S. Huh. 1999. A simulation study on the thermal buckling behaviour of laminated composite shells with embedded shape memory alloy wires, Compos. Struct., 47, 463-469. https://doi.org/10.1016/S0263-8223(00)00020-9.
- B. Noolvi, S. Raja, S. Nagaraj and V.R. Mudradi. 2017. Fabrication and testing of SMA composite beam with shape control, AIP Conference Proc., 020055. https://doi.org/10.1063/1.4990208.