- J. Madhavaraju
- J. Armstrong Altrin Sam
- K. Selvaraj
- Ranjit K. Banerji
- S. Ramesh
- Thingujam Shantikumar Singh
- Gladwin Gnana Asir
- N. Gladwin Gnana Asir
- J. S. Armstrong-Altrin
- V. Stephen Pitchaimani
- S. P. Mohan
- S. M. Hussain
- H. J. Hansen
- A. Makhnach
- Balashanmugam
- T. Tharaneeswaran
- R. Vinoth
- P. Jennifer
- B. Venkataramani
- C. Kiran Kumar
- S. Chandra Sekaran
- R. Gayathri
- Sushmita Gupta
- Ritu Rani Chaudhary
- Amit Kumar Verma
- P.N. Periyasamy
- M. Sathiya
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Ramasamy, S.
- Dropstones in Talchir Sediments of Palar Basin, Tamil Nadu - Implications on Depositional Conditions and Paleoclimate
Authors
1 Sedimentology Lab, Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 56, No 1 (2000), Pagination: 47-52Abstract
Recent field study of Gondwana sediments in the Palar basin near Chennai brings to light the occurrence of assorted size of boulders of extraneous source in argillaceous siltstones. These boulders are regarded as glacial in origin. It is interpreted that icebergs carried such boulders into a pro-glacial lake. Melting of the icebergs resulted in dropping of boulders into the depositional environment. The present study discusses the depositional environment and paleoclimate that prevailed during the deposition of these exotic boulders.Keywords
Depositional Environment, Paleoclimate, Dropstones, Gondwana Sediments, Icebergs, Pro-Glacial, Palar Basin, Tamil Nadu.- Microtextures on Quartz Grains of Campanian-Maastrichtian Sediments of Ariyalur Group of Tiruchirapalli Cretaceous, Tamil Nadu - Implication on Depositional Environments
Authors
1 Sedimentology Lab, Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai - 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 54, No 6 (1999), Pagination: 647-658Abstract
Studies on the quartz grains of the Campanian-Maastrichtian sediments of the Ariyalur Group of Tiruchirapalli Cretaceous, Tamil Nadu, using Scanning Electron Microscope (SEM) have brought out nineteen distinct microtextures. They have been grouped into features based on their mode of origin. Of these, thirteen are of mechanical and five mechanical and/or chemical origin while one distinctly chemical. The quartz grains of the Ariyalur Group sediments show a wide range of conchoidal fractures, straight steps and arcuate steps formed during the liberation from the metamorphic and igneous source rocks. The microtextures - v's, pits, straight and curved scratches are characteristic of the marine environment. The frequency of these features is higher in the grains from the Sillakkudi, Kallankurichchi and Ottakkovil Formations. Rarity of these features on quartz grains from the Kallamedu Formation is suggestive of variation in transport and depositional conditions. It has been inferred from the microtextures that the source for the quartz grains in the Ariyalur Group sediments has been the nearby Precambrian crystalline basement.Keywords
Sedimentology, Quartz Grains, Ariyalur Group, Microtextures, Depositional Environments, Tamil Nadu.- Depositional Environment of Cuddalore Sandstone Formation, Tamil Nadu
Authors
1 Department of Geology, University of Madras, A.C. College Campus, Madras 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 51, No 6 (1998), Pagination: 803-812Abstract
Cuddalore Sandstone (Mio-Pliocene) of Neyveli and Ariyalur areas has been studied to infer the depositional environment. Granulometrically, poorly to moderately sorted and fine to very finely skewed sandstones are petrographically identified as feldsarenite and litharenite. Source area for the Neyveli sediments included pyroxenite, amphibolite and granodiorite and the Ariyalur sediments were probably, derived from granite and monzonite. Major elemental data show the eugeosynclinal tectonic setting for Neyveli and taphrogeosynclinal setting for Ariyalur area. The overall study suggests a deltaic environment.Keywords
Sedimentology, Cuddalore Sandstone, Mio-Pliocene, Depositional Environment, Neyveli, Tamil Nadu.- Geology, Petrography and Systematic Stratigraphy of Pre-Ariyalur Sequence in Tiruchirapaui District, Tamil Nadu, India
Authors
1 Department of Geology, University of Madras, Madras 600025, IN
2 Department of Earth Sciences, Indian Institute of Technology, Bombay 400076, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 37, No 6 (1991), Pagination: 577-594Abstract
A new litho unit-Terani Formation is proposed. The lower part of the Uttatur Formation is found to be homotaxially equivalent to the Dalmiapuram Formation. A new geological map based on these units is presented.Keywords
Ariyalur Sequences, TiruchirapaJli Dist., Tamil Nadu, Petrography.- Rare Earth Element Geochemistry of a Sediment Core from the Lower Bengal Fan
Authors
1 Department of Geology, University of Madras, Guindy Campus, Madras - 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 50, No 4 (1997), Pagination: 399-406Abstract
The Post Archaean Australian Shale (PAAS) normalised Rare Earth Element (REE) distribution pattern of a 4m box core from the Lower Bengal Fan clearly exhibits different types of patterns according to the climatic fluctuations of Late Quaternary period. Based on the vertical profiles of REEs, ΣLight REE/ΣHeavy REE ratio, Ce^ and ΣREE the climatic boundaries were further confirmed. The influence of continental sediments with a rugher rate of sedimentation are reflected in higher concentration of ΣREE in glacial periods. The above observations suggest the Late Pleistocene - Holocene boundary at 45-50 cm depth, the Last Glacial Maximum at 50-120cm depth and Glacial (I) stage at 150-290cm depth in the core studied. Warmer periods of Interglacial stages (II) and (I) correspond to 120-150cm and 290-400cm depths.Keywords
Geochemistry, Rare Earth Elements, Quaternary, Bengal Fan.- Rare Earth Elements in Limestones of Kallankurichchi Formation of Ariyalur Group, Tiruchirapalli Cretaceous, Tamil Nadu
Authors
1 Sedimentology Lab. Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 54, No 3 (1999), Pagination: 291-301Abstract
Studies on calcium carbonate (CaCO3), trace elements and rare earth elements were carried out on the Kallankurichchi Formation in order to understand the elemental behaviour in marine limestones of the Tiruchirapalli Cretaceous. Variation in EREE content between Sandy Fossiliferous Limestone (SFL) and Fossiliferous Limestone (FL) can be explained as due to the varying amounts of terrigenous material present in the limestones. PAAS (Post Archaean Australian Shale) normalised REE patterns and LaN/YbN ((LaSample/LaShale)/(YbSample/YbShale)) ratios suggest that the terrestrial rocks are the major source for REE in these limestones. The SFL and FL show negative Ce anomalies, with slight variation between these limestones. The negative correlation between CaCO3 and Ce/Ce* values indicates that the observed Ce anomalies are not related to the CaCO3 content in SFL and FL, whereas Ce/Ce* values show positive correlation with detrital elements implying that the observed variations in the Ce anomalies resulted from the variation in the terrigenous material supplied by the continental area. SFL and FL show low U/Th ratio and U content. Low U contents suggest that the oxic condition prevailed in the bottom water and sediment column during the deposition of Kallankurichchi Formation.Keywords
Geochemistry, REE, Cerium Anomaly, U and U/Th, Oxic Environment, Tiruchirapalli Cretaceous, Tamil Nadu.- Petrography and Geochemistry of Pre-Ariyalur Sequence in Perambalur District, Tamil Nadu-Implications on Depositional Environment and Palaeoclimate
Authors
1 Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai - 600025, IN
2 Estacion Regional del Noroeste, Instituto de Geologia, Universidad Nacional Autonoma de Mexico, Apartado Postal 1039, Hermosillo, Sonora 83000, MX
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 69, No 1 (2007), Pagination: 121-132Abstract
The Maruvattur quarry section (Dalmiapuram Formation) is located near the Archaean-sedimentary boundary at the western margin of the Ariyalur-Pondicherry sub-basin. The lithofacies observed in the quarry include boulder-algal limestone and clastic limestone alternating with siltstone and claystone. This amply reveals that the depositional conditions fluctuated between carbonate facies to fine clastic facies. The coarse clastic materials are not found in the litho-sequence suggesting that the source area reached a peneplanation stage. This stage released only fine clastic materials to develop silty clay and siltstone lithologies. The clastic deposition was fine grained, hence it is interpreted that the depositional basin experienced a calm environment. The limestone units are mostly bedded types pointing out that the older biohermal limestone underwent erosion and redeposited as clastic limestone to form biostromal limestone. The clastic limestone has a few impressions of trace fossils suggesting the slower rate of sedimentation in a comparatively deeper marginal basin.
The Anaipadi river traverse representing Garudamangalam Formation indicates a variable lithological association along the dip direction. The claystone is the bottom most unit of this traverse. The clastic deposition is followed by a muddy carbonate phase, which further indicates a calm neritic environment that existed for sometime before deposition of subarkosic-Arkosic lithofacies towards the top in the traverse. The varied distribution of clastics has been useful to synthesise information on tectonics and sedimentation.
The trilinear plots such as Q, F, L (quartz, feldspar and lithic fragments), and Qm, K, P (quartz monocrystalline, potash and plagioclase feldspars) derived through modal analysis suggest a granitoid source area. The petrographic study and modal analysis suggest that the bottom quartz rich sequence formed in a semi-humid type climate, which gradually became semi-Arid as evidenced by the subarkosic-Arkosic sands towards upper level along the Anaipadi river traverse.
Keywords
Petrography, Geochemistry, Palaeoclimate, Depositional and Diagenetic Environments, Dalmiapuram and Garudamangalam Formations, Perambalur, Tamil Nadu.- Depositional and Diagenetic Inferences of a Shallow Core near Tuticorin Coast, Tamil Nadu
Authors
1 People's Action for Development, 2/29, Sebastian Kovil Street, Vembar - 628 906, IN
2 Sedimentology Lab, Department of Geology, University of Madras, Chennai - 600025, IN
3 Centre de Investigaciones en Ciencias de la Tierra, Universidad Autdnoma del Estado de Hidalgo, Ciiidad Universitana, Carretera Pachuca-Tulancingo km. 4.5, Pachuca, Hidalgo, 42184, MX
4 Universidad Nacional, Autonoma de Mexico, Institute de Geologia, Estacion Regional del Noroeste, Hermosillo, Sonora, MX
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 70, No 6 (2007), Pagination: 1021-1032Abstract
An 8.8m of consolidated core obtained below 20m of unconsolidated marly sediments near the Tuticorin coast was subjected to detailed stratigraphic, petrographic and geochemical analyses. A lithological succession with eight minor Litho-Units in ascending order has been established: Shell limestone, lower sandy shell limestone, calcareous conglomerate, middle sandy shell limestone, algal limestone, upper sandy shell limestone, calcareous sandstone and calcrete. The petrographic types are mostly the variants of wackestone, boundstone, arenite and calcrete. CaO is high in shell limestone, algal limestone and sandy shell limestone and proportionately SiO2 is low in these litho-units. Algal limestone is enriched in MgO content, The conversion of high Mg-calcite to low Mg-calcite, aragonite inversion as well as mixed zone diagenetic setting resulted in depletion of both δ13C and δ18O, The petrographic evidence and assemblage of the juvenile gastropods, pelecypods, bryozoans, algae and benthic foraminifers suggest a fluctuating inner neritic to a moderately high saline lagoonal depositional environment. The absence of sparry calcite indicates an early marine to mixed zone diagenetic settings and the shell limestone unit experiences a moderate burial diagenesis while the upper units experience a shallow burial diagenesis. A Late Tertiary age is assigned to the shell rich limestone unit.Keywords
Depositional And Diagenetic Environments, Petrography, Stable Isotopes, Shallow Core, Tuticorin Coast, Tamil Nadu.- Provenance and Depositional History of Sandstones from the Upper Miocene Kudankulam Formation, Tamil Nadu
Authors
1 Centro de Investigaciones en Clencias de la Tierra, Universidad Autonoma del Estado de Hidalgo, Ciudad Universitaria, Carretera Pachuca-Tulancingo km 4 5, Pachuca, Hidalgo- 42184, MX
2 Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai - 600 025, Tamil Nadu, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 66, No 1 (2005), Pagination: 59-65Abstract
Quartz grains from Kudankulam Formation were studied using Scanning Electron Microscope(SEM), which brought out eighteen microtextures. The quartz grams of Kudankulam Formation show different types of conchoidal fracture, arcuate steps, V-shaped patterns, pits and sub angular to Sub-Rounded outline. The presence of conchoidal fracture and arcuate steps suggest that these quartz grains were derived from the nearby crystalline source. The microtextures such as V-shaped patterns, pits, straight and curved scratches are characteristic of marine environment.Keywords
Quartz Grains, Microtextures, Kudankulam Formation, Provenance, Depositional History, Tirunelveli District, Tamil Nadu.- Petrography and Surface Textures on Quartz Grains of Nimar Sandstone, Bagh-Begs, Madhya Pradesh - Implications for Provenance and Depositional Environment
Authors
1 Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai- 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 64, No 6 (2004), Pagination: 747-762Abstract
Petrography, fluid inclusions and surface texture studies have been carried out on the Nimar Sandstone, which have provided fruittful results on pravenance and depositional environment The detrital omposition of sandstones plotted in the Q-F-L diagram suggests cratonic orrgin The modal percentages of different types of quartz plotted in the diamond diagram Indicate that these sediments were derived from the low-grade metamorphic rocks Quartz grains show randomly distributed primary inclusions, small trails of pseudosecondary inclusions and needle-shaped solid phases also support that the source rocks are mainly low-grade metamorphc rocks The surface textures on quartz grains reveal the presence of twenty-two distinct surface textures Based on their origin, these textures are grouped into three types viz I) thirteen features that show mechanical origin, II) five features that exhibit mechanical and/or chemical origin and III) four features that reveal chemical (precipitational)origin The quartz grans exhibit conchoidal fractures, arcuate steps, and fractured plates/planes, which resulted during the liberation of these grains from the crystalline formations They also exhibipt petransportational features such as pedological overgrowths, silica globules, flower and pellicles, which are indicative of short transportation and rapid deposition of these sediments Vs, straight and curved scratches are more common on the quartz grains from the upper Nimar Sandstone (whtch are characteristic features of marine environment), whereas the lower frequency of these features on the quartz grains from the lower Nimar Sandstone suggest fluvia depositional environments.Keywords
Petrography, Quartz grains, Fluid inclusion, Surface textures, Nimar Sandstone, Provenance, Depositional environment, Bagh Beds, Madhya Pradesh.- Magnetic Susceptibility Study of Late Maastrichtian Sediments of Ariyalur Group of Tiruchirapalli Cretaceous, Tamil Nadu
Authors
1 Department of Geology, School of Earth and Atmospheric sciences, University of Madras. Gundy Campus, Chennai 600025, IN
2 Geological lnstitute, University of Copenhagen, Oster Volgade 10, Copenhagen, DK
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 61, No 6 (2003), Pagination: 699-702Abstract
The present study reports the magnetic susceptibility study of Late Maastrichtian sediments (Kallamedu Formation) of Anyalur Group The Nimyur section exhibits two types of susceptIbility pattern Ie C-zero and C4 The susceptibility pattern of this sectIon fits well with the patterns observed In the mterval of Upper Cretaceous part of the reversed interval (29R) The K/T boundary has been fixed above the C-zero peak 10 most of the studied sections around the world We suggest that the K/T boundary should be placed above the Nimyur section, based on the characteristicc magnetic susceptibility pattern.Keywords
Magnetic susceptibility, Late Maastrichtian, Kallamedu Formation, Anyalur Group, Tamil Nadu.- Petrography and Major Element Geochemistry of Late Maastrichtian- Early Palaeocene Sediments of Tiruchirapalli, Tamil Nadu - Palaeoweathering and Provenance Implications
Authors
1 Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 59, No 2 (2002), Pagination: 133-142Abstract
Petrographic and geochemical studies of the Late Maastrichtian-Early Palaeocene sediments of Kallamedu and Niniyur Formations of Tiruchirapalli have brought out significant results on palaeoweathering and source area characteristics. In the bivariate plot of SiO2 vs Al203+K20+Na203 all the clastic samples fall in the arid field indicating that the arid climatic condition prevailed in the source region during the deposition of these sediments. In the Al203 vs Na20 plot, the clastic samples fall between low grade Archaean shale and post-Archaean shale suggesting that the detrital components have been derived from low to moderately weathered terrain. The Chemical Index or Alteration of clastic sediments range from 40 to 69 with lower values for sandstones (40 to 57) than for silty shale and shale (61 to 69) and this indicates that the source rocks have undergone low to moderate chemical weathering. In QFL diagram, most of the sandstones fall in the field of cratonic interior basin which indicate that these sediments were deposited in the stable craton. SiO2/Al203 ratios are high observed for sandstone, silty shale and shale, with a range starting from 3.15 to 8.75. The higher ratios of SiO2/Al2O3 in clastic sediments indicate a largely felsic rock provenance. Major element data indicate an overall taphrogeosynclinal continental rift-related depositional basin.Keywords
Petrography, Geochemistry, Cretaceous Sediments, Palaeoweathering, Provenance, Tiruchirapalli, Tamil Nadu.- Stable Isotope Geochemistry and Evidence for Meteoric Diagenesis in Kudankulam Formation, Tamil Nadu
Authors
1 Sedimentology Laboratory, Department of Geology, University of Madras, Guindy Campus, Chennai - 600 025, IN
2 Institute of Geological Sciences, National Academy of Sciences of Belarus, Kuprevich Street 7, 220141 Minsk, BY
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 57, No 1 (2001), Pagination: 39-48Abstract
The results obtained from stable isotope study of Neogene carbonates of Kudankulam, Tamil Nadu show negative values for δ13C, which range from -2.6‰ to -9.7‰ PDB. The δ18O values range from -4.5‰ to -11.4‰ PDB. The depleted nature of the δ18O and δ13C values suggests the strong effect of meteoric diagenesis in the Kudankulam carbonates. Standard bivariate plots of δ18O versus δ13C for carbonate materials/rocks helped to identify their depositional and diagenetic environments. Petrographic study points out large-scale emplacement of ferroan sparry calcite cement into vugs and other leached cavities.Keywords
Limestones, Miocene, Petrography, Geochemistry, Stable Isotopes, Diagenesis, Tamil Nadu.- Clay Mineral Assemblages and Rare Earth Element Distribution in the Sediments of Ariyalur Group, Tiruchirapalli District, Tamil Nadu-Implication for Paleoclimate
Authors
1 Sedimentology Lab, Department of Geology, School of Earth and Atmospheric Sciences University of Madras, Guindy Campus, Chennai 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 58, No 1 (2001), Pagination: 69-77Abstract
Illite and smectite are the major clay minerals, whereas kaolinite and chlorite are present in small amounts in the sedimentary rocks of Ariyalur Group. The samples belonging to Ariyalur Group exhibit LREE enriched and flat HREE patterns. These samples show high ratios of CLREEIZHREE (7.65 to 19.42) which indicate that these sediments were derived from the felsic source rocks. The persistence of uniform REE patterns for the clastic samples of four formations of Ariyalur Group distinctly implies a hoinogenous nature of the source rocks. The Sillakkudi and Kallankurichchi Formations (Campanian - early Maastrichtian) exhibit high content of illite which indicate that the sediments were derived from pre-existing rocks (granites and gneiss), subjected to physical weathering in a tempcrate climate. A sudden change in illite content was noticed in Ottakkovil Formation, which probably points out a change of climate from cold to warm during middle Maastrichtian. The abundance of pedogenic smectite in the Kallamedu Formation suggests warm climate with drylwet cycles.Keywords
Clay Minerals, REE, Ariyalur Group, Campanian, Maastrichtian, Paleoclimate.- Inferences on Rhodoids from Neogene Carbonates of Kudankulam, Tamil Nadu
Authors
1 Sedimentology Laboratory, Department of Geology, University of Madras, Chennai - 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 52, No 3 (1998), Pagination: 341-344Abstract
Rhodoids are laminated algal nodules generally found in shallow marine environment. Algal crusts and nodules are poorly exposed between Kudankulam and Sattankulam in the coastal area near Cape Comorin. The thickness of the bed of algal limestone varies from 0.5 to 1.5 m. The occurrence of abraded rhodoids with lack of terrigenous material suggests moderate to high energy depositional condition. The present study of the rhodoids, points out that the Neogene tectonic activity has played a significant role for the development of algal limestone and rhodoids in the study area.Keywords
Palaeoenvironment, Rhodoids, Neogene Carbonates, Tamil Nadu.- Ooids in Sillakkudi Formation of Ariyalur Group of Tiruchirapalli Cretaceous, Tamil Nadu: Implications for Origin and Depositional Environment
Authors
1 Department of Geology, School of Earth and Atmospheric Sciences, University of Madras, Guindy Campus, Chennai 600 025, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 60, No 3 (2002), Pagination: 317-322Abstract
An ooid-rich limestone band of Sillakkudi Formation is encountered in a well section near Ariyalur. The ooids are believed to be deposited in a marine regime. They contain berthierine as the major mineral and haematite, siderite and quartz as minor minerals. They exhibit alternate rings of berthierine and haematite which shows that these minerals were developed under changing physico-chemical conditions. In the present paper, the petrographical characters, mineralogy, origin and depositional environment of the ooids are discussed.Keywords
Ooids, Berthierine, Sillakkudi Formation, Depositional Environment, Ariyalur, Tamil Nadu.- Experimental Investigation of Solar Water Heater with Thermal Energy Storage System
Authors
1 Annamalai University, Annamalainagar, Tamilnadu, IN
Source
Research Journal of Science and Technology, Vol 8, No 4 (2016), Pagination: 190-198Abstract
Unfortunately the global conventional fuels in reserves are running out while the world energy consumption is increasing very fast. All scientists agreed that solar energy is one of the best solutions for energy supply in many parts of the world. The aim of this work is to experimentally investigate the solar water heater at various flow rates integrated with phase change material (PCM). Abundantly available solar energy utilization for domestic and industrial application is hindered because of its intermittent nature. The thermal energy storage (TES) system using both the sensible and latent heat has many advantages like large heat storage capacity in a unit volume and its isothermal behaviour during the charging and discharging processes. The system consists of two simultaneous functioning heat absorbing units. One of them is a solar water heater sensible heat storing unit and the other a latent heat storage unit consisting of phase change materials (OM53). The storage unit stores the heat in phase change materials during (charging period) the daytime and supplies hot water, when solar radiation is not available. The experiment was conducted with different types of flow rates and verified energy storage time period in the evening hours.Keywords
Thermal Energy Storage, Phase Change Material, Fossil Fuel, Sensible Heat, RTD.- Performance of Leakage Power Minimization Technique for CMOS VLSI Technology
Authors
1 Department of Electronics and Communication Engineering, R.M.K Engineering College, IN
Source
ICTACT Journal on Communication Technology, Vol 3, No 2 (2012), Pagination: 557-562Abstract
Leakage power of CMOS VLSI Technology is a great concern. To reduce leakage power in CMOS circuits, a Leakage Power Minimiza-tion Technique (LPMT) is implemented in this paper. Leakage cur-rents are monitored and compared. The Comparator kicks the charge pump to give body voltage (Vbody). Simulations of these circuits are done using TSMC 0.35μm technology with various operating temper-atures. Current steering Digital-to-Analog Converter (CSDAC) is used as test core to validate the idea. The Test core (eg.8-bit CSDAC) had power consumption of 347.63 mW. LPMT circuit alone consumes power of 6.3405 mW. This technique results in reduction of leakage power of 8-bit CSDAC by 5.51mW and increases the reliability of test core. Mentor Graphics ELDO and EZ-wave are used for simulations.Keywords
Leakage Currents, Current Comparator, Charge Pump, Test Core, Current Steering DAC, CMOS.- A Robust Flip-Flop for Industrial Applications
Authors
1 Department of Electronics and Communication Engineering, R.M.K. Engineering College, IN
Source
ICTACT Journal on Microelectronics, Vol 2, No 1 (2016), Pagination: 188-192Abstract
Flip-flops are the basic building blocks of any sequential circuits which occupy the maximum area in a circuit. So the robustness of the system greatly depends on the reliable operation of the flip-flop. In this work the PowerPC 603 flip-flop is simulated and analyzed to measure its reliability against variations in supply voltage and temperature. Performance analysis has been made by having Power, Delay and PDP as Figures of Merit. The acquired simulation results revealed the different sources of power consumption in different scenarios. The simulated results using finer technologies with Synopsys HSPICE prove that PowerPC 603 is a resilient flip-flop for all corners.Keywords
PowerPC 603, Flip-Flop, Low Power.- Design and Implementation of High Speed Latched Comparator Using gm/Id Sizing Method
Authors
1 Automotive Infotainment Systems, Microchip Technology Pvt. Ltd., IN
2 School of Electrical Engineering and Computing, Addis Ababa Science and Technology University, ET
Source
ICTACT Journal on Microelectronics, Vol 2, No 4 (2017), Pagination: 300-304Abstract
Design of an analog circuit depends on several factors such as design methodology, good modeling and technology characterization. This work focuses on designing a high speed (1.6GHz) latched comparator with low power consumption suitable for ADCs in SoC applications. The latched comparator is designed with StrongArm latch as the primary decision and amplification stage followed by a latching element to drive the output load. The StrongArm latch is a proven circuit topology suitable for all seasons. The zero static power consumption of StrongArm latch is exploited to design a low power comparator. The output latch is used to hold the previous output value during the tracking time of the comparator. The designed comparator achieves zero setup time at a clock frequency of 1.6GHz and produces digital output with a maximum delay of 180ps.The comparator is implemented with SAED 32nm technology libraries. The performance has been analyzed using HSPICE simulator.Keywords
Latched Comparator, Strong Arm Latch, High Speed, Low Power.References
- Shubhara Yewale and Radheshyam Gamad, “Design of Low Power and High Speed CMOS Comparator for A/D Converter Application”, Wireless Engineering and Technology, Vol. 3, No. 2, pp. 90-95, 2012.
- Fernando da Rocha Paixao Cortes, Eric E. Fabris and Sergio Bampi, “Analysis and Design of Amplifiers and Comparators in CMOS 0.35μm Technology”, Microelectronics Reliability, Vol. 44, No. 4, pp. 657-664, 2003.
- T. Kobayashi, K. Nogami, T. Shirotori, Y. Fujimoto and O. Watanabe, “A Current-Mode Latch Sense Amplifier and a Static Power Saving Input Buffer for Low-Power Architecture”, Proceedings of Symposium on VLSI Circuits Digest of Technical Papers, pp. 28-29, 1992.
- F. Silveira, D. Flandre and P.G.A. Jespers, “A g/Sub m//I/sub D/ base Methodology for the Design of CMOS Analog Circuits and its Application to the Synthesis of a Silicon-on-Insulator Micropower OTA”, IEEE Journal of Solid-State Circuits, Vol. 31, No. 9, pp. 1314-1319, 1996.
- Behzad Razavi, “The Strong ARM Latch A Circuit for all Seasons”, IEEE Solid-State Circuits Magazine, Vol. 7, No. 2, pp. 12-17, 2015.
- Shankar, G. Vasudeva and J.R. Girish, “Design of High Performance CMOS Comparator using 90nm Technology”, International Journal of Modern Trends in Engineering and Research, Vol. 3, No. 5, pp. 333-337, 2016.
- Nikhila Paruchuri, Maya S. Patil and K. Ramesh Babu, “Design of a Low-Voltage, Power and Double Tail Comparator Using CNTFET”, International Journal of Advance Engineering and Research Development, Vol. 1, No. 9, pp. 113-124, 2014.
- A Low Power Programmable Bandpass Filter For Digital Radio Mondiale
Authors
1 Department of Electrical and Computer Engineering, Addis Ababa Science and Technology University, IN
2 Department of Electrical and Communication Engineering, National Institute of Technology, Tiruchirappalli, IN
Source
ICTACT Journal on Microelectronics, Vol 4, No 3 (2018), Pagination: 634-640Abstract
In this paper, an inverter based transconductor using double CMOS pair is proposed for implementation of a programmable bandpass filter suitable for Digital Radio Mondiale (DRM). Major contributions of this paper are: proposal for operating the transconductance (Gm) stage in sub-threshold region in order to minimize the power dissipation, proposal for switching in different Gm cells with suitable dummy stages for varying the centre frequency (F-tuning) and filter pass band (Q-tuning), proposal for a digital tuning technique for the filter based on phase comparison method for PVT compensation. The filter circuit is based on a biquad Gm-C topology, which is designed and implemented on CMOS 0.18μm technology with 1.8V supply using gm/Id design methodology. The post layout simulation results demonstrate the tunability of the centre frequency from 2MHz to 11MHz with quality factor tunable up to 50, which meets the requirements of DRM (upto 30MHz). Post layout simulation results show that the filter exhibits an in-band dynamic range of 53dB at gain of 7dB. An input IP3 of up to 28dBVp is achieved for an input signal of 100mVp. The SFDR over the entire bandwidth is 57dB. These features are obtained for a total power consumption of less than 300 μW from a single 1.8 V power supply with an estimated silicon area of 0.3mm2. The proposed approach guarantees the upper bound on THD to be -40dB for 300mVpp signal swing. The use of inverters with double CMOS pair results in 34dB higher PSRR compared to those using push pull inverter.Keywords
Continuous Time Filter, Sub-Threshold, Intermediate Frequency (IF) Bandpass Filter, Double CMOS Pair.- An Improvised Ensemble CNN Algorithm for Detectting Video Stream in MultimediaAn Improvised Ensemble CNN Algorithm for Detectting Video Stream in Multimedia
Authors
1 Data Science, Codecraft Technologies, Bangalore, IN
2 Department of Computer Science and Engineering, PSV College of Engineering and Technology, IN
3 Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, IN
4 Department of Computer Science and Engineering, Hindusthan Institute of Technology, IN
Source
ICTACT Journal on Image and Video Processing, Vol 13, No 2 (2022), Pagination: 2860-2864Abstract
The only criteria that are used to evaluate the various neural network-based object identification models that are currently in use are the inference times and accuracy levels. The issue is that in order to put these new classes and situations to use in smart cities, we need to train on them in real time. We were not successful in locating any research or comparisons that were centered on the length of time necessary to train these models. As a direct consequence of this, the initial reaction times of these object identification models will consistently be quite slow (maybe in days). As a consequence of this, we believe that models that put an emphasis on the speed of training rather than accuracy alone are in significant demand. Users are able to gather photos for use in training in the present by utilizing concept names in online data collection toolkits; however, these images are iconic and do not have bounding boundaries. Under these conditions, the implementation of semi-supervised or unsupervised models in a variety of smart city applications might be able to contribute to an improvement in the precision of data derived from IoMT. In this study, we categorize the video clips into their appropriate classes using an improved ensemble classification model.Keywords
CNN, Ensemble, Video Stream, IoT.References
- J. Bethencourt, D. Song and B. Waters, “New Techniques for Private Stream Searching”, ACM Transactions on Information and System Security, Vol. 12, No. 3, pp. 1-32, 2009.
- David Money Harris, and Sarah L. Harris, “Digital Design and Computer Architecture”, Morgan Kaufmann, 2007.
- J. Bethencourt, D. Song and B. Waters, “New Techniques for Private Stream Searching”, ACM Transactions on Information and System Security, Vol. 12, No. 3, pp. 1-32, 2009.
- X.V. Nguyen and N.N. Dao, “Intelligent Augmented Video Streaming Services Using Lightweight QR Code Scanner”, Proceedings of IEEE International Conference on Communication, Networks and Satellite, pp. 103-107, 2021.
- D. Nagothu, R. Xu and A. Aved, “DeFake: Decentralized ENF-Consensus Based DeepFake Detection in Video Conferencing”, Proceedings of IEEE International Workshop on Multimedia Signal Processing, pp. 1-6, 2021.
- Caroline Fontaine and Fabien Galand, “A Survey of Homomorphic Encryption for Nonspecialists”, Journal of Information Security, Vol. 1, pp. 41-50, 2009.
- X. Jin and J. Xu, “Towards General Object-Based Video Forgery Detection via Dual-Stream Networks and Depth Information Embedding”, Multimedia Tools and Applications, Vol. 81, No. 25, pp. 35733-35749, 2022.
- S.M. Kulkarni, D.S. Bormane and S.L. Nalbalwar, “Coding of Video Sequences using Three Step Search Algorithm”, Proceedings of International Conference on Advance in Computing, Communication and Control, pp. 34-42, 2015.
- K. Leela Bhavani and R. Trinadh, “Architecture for Adaptive Rood Pattern Search Algorithm for Motion Estimation”, International Journal of Engineering Research and Technology, Vol. 1, No. 8, pp. 1-6, 2012
- R. Sudhakar and S. Letitia, “Motion Estimation Scheme for Video Coding using Hybrid Discrete Cosine Transform and Modified Unsymmetrical-Cross Multi Hexagon-Grid Search Algorithm”, Middle-East Journal of Scientific Research, Vol. 23, No. 5, pp. 848-855, 2015.
- J. Hu and Z. Qin, “Detecting Compressed Deepfake Videos in Social Networks using Frame-Temporality Two-Stream Convolutional Network”, IEEE Transactions on Circuits and Systems for Video Technology, Vol. 32, No. 3, pp. 1089-1102, 2021.
- Shih-Hao Wang, Shih-Hsin Tai and Tihao Chiang, “A LowPower and Bandwidth-Efficient Motion Estimation IP Core Design using Binary Search”, IEEE Transactions on Circuits and System for Video Technology, Vol. 19, No. 5, pp. 760-765, 2009.
- D. Nagothu and A. Aved, “Detecting Compromised Edge Smart Cameras using Lightweight Environmental Fingerprint Consensus”, Proceedings of ACM Conference on Embedded Networked Sensor Systems, pp. 505-510, 2021.
- B. Zawali, S. Furnell and A. A-Dhaqm, “Realising a Push Button Modality for Video-Based Forensics”, Infrastructures, Vol. 6, No. 4, pp. 54-62, 2021.[1] J. Bethencourt, D. Song and B. Waters, “New Techniques for Private Stream Searching”, ACM Transactions on Information and System Security, Vol. 12, No. 3, pp. 1-32, 2009.
- David Money Harris, and Sarah L. Harris, “Digital Design and Computer Architecture”, Morgan Kaufmann, 2007.
- J. Bethencourt, D. Song and B. Waters, “New Techniques for Private Stream Searching”, ACM Transactions on Information and System Security, Vol. 12, No. 3, pp. 1-32, 2009.
- X.V. Nguyen and N.N. Dao, “Intelligent Augmented Video Streaming Services Using Lightweight QR Code Scanner”, Proceedings of IEEE International Conference on Communication, Networks and Satellite, pp. 103-107, 2021.
- D. Nagothu, R. Xu and A. Aved, “DeFake: Decentralized ENF-Consensus Based DeepFake Detection in Video Conferencing”, Proceedings of IEEE International Workshop on Multimedia Signal Processing, pp. 1-6, 2021.
- Caroline Fontaine and Fabien Galand, “A Survey of Homomorphic Encryption for Nonspecialists”, Journal of Information Security, Vol. 1, pp. 41-50, 2009.
- X. Jin and J. Xu, “Towards General Object-Based Video Forgery Detection via Dual-Stream Networks and Depth Information Embedding”, Multimedia Tools and Applications, Vol. 81, No. 25, pp. 35733-35749, 2022.
- S.M. Kulkarni, D.S. Bormane and S.L. Nalbalwar, “Coding of Video Sequences using Three Step Search Algorithm”, Proceedings of International Conference on Advance in Computing, Communication and Control, pp. 34-42, 2015.
- K. Leela Bhavani and R. Trinadh, “Architecture for Adaptive Rood Pattern Search Algorithm for Motion Estimation”, International Journal of Engineering Research and Technology, Vol. 1, No. 8, pp. 1-6, 2012
- R. Sudhakar and S. Letitia, “Motion Estimation Scheme for Video Coding using Hybrid Discrete Cosine Transform and Modified Unsymmetrical-Cross Multi Hexagon-Grid Search Algorithm”, Middle-East Journal of Scientific Research, Vol. 23, No. 5, pp. 848-855, 2015.
- J. Hu and Z. Qin, “Detecting Compressed Deepfake Videos in Social Networks using Frame-Temporality Two-Stream Convolutional Network”, IEEE Transactions on Circuits and Systems for Video Technology, Vol. 32, No. 3, pp. 1089-1102, 2021.
- Shih-Hao Wang, Shih-Hsin Tai and Tihao Chiang, “A LowPower and Bandwidth-Efficient Motion Estimation IP Core Design using Binary Search”, IEEE Transactions on Circuits and System for Video Technology, Vol. 19, No. 5, pp. 760-765, 2009.
- D. Nagothu and A. Aved, “Detecting Compromised Edge Smart Cameras using Lightweight Environmental Fingerprint Consensus”, Proceedings of ACM Conference on Embedded Networked Sensor Systems, pp. 505-510, 2021.
- B. Zawali, S. Furnell and A. A-Dhaqm, “Realising a Push Button Modality for Video-Based Forensics”, Infrastructures, Vol. 6, No. 4, pp. 54-62, 2021.
- In-silico Ligand and Structure Based Design of Hiv-1 Protease Inhibitors: Current Trends and Future Directions
Authors
1 Department of Pharmacy, MJP Rohilkhand University, Bareilly 243006, Uttar Pradesh, IN
2 Department of Applied Chemistry, Faculty of Engineering and Technology, M. J. P. Rohilkhand University, Bareilly - 243006, Uttar Pradesh, IN
3 Department of Chemistry, B.S.A. Degree College, Mathura, Uttar Pradesh, IN
Source
Research Journal of Pharmacy and Technology, Vol 15, No 4 (2022), Pagination: 1477-1482Abstract
A study of the function of the protease inhibitor as well as of highly active antiretroviral therapy is involved in the present work. The paper focused on the cause of drug resistance and related phenomena, the HIV protease structure and its catalytic mechanism, the production of HIV inhibitors based on CADD, as well as ligand-based drug design using QSAR and computational binding energy technique, other computational modelling, optimization based on CORAL software. In order to shed light on the potential growth of the new drug for the treatment of HIV, the debate on the prediction of the desired biological activity and the structural relationship studies and study related to the structure-based drug design and the most potent drugs was reviewed.Keywords
In-silico Ligand, HIV-1 Protease Inhibitors, Highly Active Anti-Retroviral Therapy (HAART), Support Vector Machine (SVM).References
- Tomasselli A.G. and Heinrikson R.L. Targeting HIV-protease in AIDS therapy: a current clinical perspective. Biochim Biophys. Acta. 2000; 1477: 189-214.
- Kempf D.J. Design of symmetry-based, peptidomimetic inhibitors of human immunodeficiency virus protease. Methods Enzymol. 1994; 241: 234-254.
- Kempf D.J. and Sham H.L. HIV protease inhibitors. Curr. Pharm. Design. 1996; 2: 225-246.
- Moore M.L. and Dreyer G.B. Substrate based inhibitor of HIV-1 protease. Prospect Drug. Discovery Des. 1993; 1: 85-108.
- Darwin C. The origin of species by means of natural selection: Or, the preservation of favored races in the struggle for life; John Murray publishers: London. 1859.
- Richman D.D. HIV drug resistance. Ann Rev. Pharmacol. Toxicol. 1993; 33: 149-164.
- Peng C, Ho BK, Chang TW, Chang NT. Role of human immunodeficiency virus type 1 specific protease in core protein maturation and viral infectivity. J. Virol. 1989; 63: 2550-2556.
- Wlodawer A. Miller M. Jaskolski M. Sathyanarayana B.K. Baldwin E. Weber I.T. Selk L.M. Clawson L. Schneider J. Kent S.B. Conserved folding in retroviral proteases: crystal structure of a synthetic HIV-1 protease. Science. 1989; 245: 616-621.
- Wlodawer A. Vondrasek J. Inhibitors of HIV-1 protease: a major success of structure-assisted drug design. Annu. Rev. Biophy. Biomol. Struct. 1998; 27: 249-284.
- Prabu-Jeyabalan M. Nalivaika E. Schiffer C.A. Substrate shape determines specificity of recognition for HIV-1 protease: analysis of crystal structures of six substrate complexes. Structure. 2002; 10: 369-381.
- Parkin N.T. Chamorro M. Varmus H.E. Human immunodeficiency virus type 1 gag-pol frameshifting is dependent on downstream mRNA secondary structure: demonstration by expression in-vivo. J. Virol. 1992; 66: 5147-5151.
- Dunn B.M. Gustchina A. Kay J. Subsite preferences of retroviral proteinases. Methods Enzymol. 1994; 24: 254-278.
- Tozser J, Weber IT, Gustchina A, Blaha I, Copeland TD, Louis JM, Oroszlan S. Kinetic and modeling studies of S3-S3’ subsites of HIV proteinases. Biochemistry. 1992; 31: 4793-4800.
- Sangamwar A.T. Deshpande U.D. Pekamwar S.S. Vadwalkar S.M. Improving decision making for drug candidates: A computational approach for benzthiazoles as antifungal. Ind. J. Biotech. 2007; 6: 389-396.
- Zaihra A. Kumar S.P. Garg V.K. Kumar S. Different Techniques in drug design. Int. J. Ph. Sci. 2010; 2: 623-630.
- Richard MH. Relations between the biological and physicochemical properties of series of compounds, J. Med. Chem. 1975; 18: 231-233.
- Erb R.J. Introduction to back propagation neural network computation, Pharm. Res. 1993; 10: 165–170.
- Friedman S.H. Decamp D.L. Sijbesma R.P. Srdanov G. Wudl F. Kenyon G.L. Inhibition of the HIV-1 Protease by fullerene derivatives: model building studies and experimental verification. J. Am. Chem. Soc. 1993; 115: 6506–6509.
- Bosi S. Da Ros T. Spalluto G. Balzarini J. Prato M. Synthesis and anti-HIV properties of new water-soluble bisfunctionalized[60] fullerene derivatives Bioorg. Med. Chem. Lett. 2003; 13: 4437–4440.
- Joy R. A. P. Education to Mothers of Under Fives on First aid Measures for Home Accidents at Nadu Arasur, Coimbatore. Asian J. Nur. Edu. and Research 1(4): Oct-Dec. 2011; Page 125-126.
- Sijbesma R. Srdanov G. Wudl F. Castoro J.A. Wilkins C. Friedman S.H. De Camp D.L. Kenyon G. Synthesis of a fullerene derivative for the inhibition of HIV enzymes J. Am. Chem. Soc. 1993; 115: 6510–6512.
- Rajagopalan P. Wudl F. Schinazi R.F. Boudinot F.D. Pharmacokinetics of a water-soluble fullerene in rats. Antimicrob. Agents Chemother. 1996; 40 (10): 2262–2265.
- Marcorin G.L., Ros T.D. Castellano S. Stefancich G. Bonin-Miertus I.S. Prato M. Design and synthesis of novel [60] fullerene derivatives as potential HIV aspartic protease inhibitors. Org. Lett. 2000; 25: 3955–3958.
- Bosi S, Da Ros T, Spalluto G, Prato M. Fullerene derivatives: an attractive tool for biological applications. Eur. J. Med. Chem. 2003; 38: 913–923.
- Marchesan S. Ros T.D. Spalluto G. Balzarinib J. Prato M. Anti-HIV properties of cationic fullerene derivatives. Bioorg. Med. Chem. Lett. 2005; 15: 3615–3618.
- Mahalwar V. The Companies Act, 2013: Some Reflections. Int. J. Rev. and Res. Social Sci. 1(2): Oct. - Dec. 2013; Page 34-35.
- Rajeswari U. Venkatesan L., Sonia L. A. Effectiveness of Clinical Pathway for Parturient Mothers upon Knowledge and Practice of Nurses and Maternal Outcome. Asian J. Nur. Edu. and Research 2(2): April-June 2012; Page 90-95.
- Shubhang S. Distinction between Company and Partnership. Int. J. Rev. and Res. Social Sci. 1(1): July –Sept. 2013; 05-08.
- Lee V.S. Nimmanpipug P. Aruksakunwong O. Promsri S. Sompornpisut P. Hannongbua S. Structural analysis of lead fullerene-based inhibitor bound to human immunodeficiency virus type 1 protease in solutions from molecular dynamics simulations. J. Mol. Graph. Model. 2007; 26: 558–570.
- Deepa R. Education on Prevention of Swine Flu among Early Adults in Sri Ramakrishna Arts and Science College, Coimbatore. Asian J. Nur. Edu. and Research 1(1): Jan.-March 2011; Page 01-02
- Schaal W. Karlsson A. Ahlsen G. Lindberg J. Andersson H.O. Danielson U.H. Classon B. Unge T. Samuelsson B. Hulten J. Hallberg A. Karlen A. Synthesis and Comparative Molecular Field Analysis (CoMFA) of symmetric and nonsymmetric cyclic sufamide HIV-1 protease inhibitors. J. Med. Chem. 2000; 44: 155-169.
- Paul S. Saha D. Pharmacognostic Studies on Methanolic Extract of the Aerial Part of Leucas zeylanica (L.). Asian J. Pharm. Res. 2(4): Oct. - Dec. 2012; Page 142-143.
- Sathya Devi K. M. Venkatesan L. Sonia L. Effectiveness of Clinical Pathway for Postnatal Mothers with Vaginal Delivery upon the Knowledge and Practice of Nurses and Maternal Outcome. Asian J. Nur. Edu. and Research 2(3): July-Sept. 2012; Page 165-170.
- Begum R. N. Dipsomania. Asian J. Nur. Edu. and Research 1(3): July-Sept. 2011; Page 98.
- Maw H.H. Hall L.H. QSAR modeling of β-lactam binding to human serum proteins. J. Chem. Inf. Comput. Sci. 2002; 42: 290.
- Kalra P. Reddy T.V. Jayaram B. Free energy component analysis for drug design. J. Med. Chem. 2001; 44: 4325.
- Pazargadi M. Ashktorab T. Khosravi S. Nursing Students’ Experiences on the Evaluating Role of Their Clinical Educators: a Qualitative Study. Asian J. Nur. Edu. and Research 2(3): July-Sept. 2012; Page 149-153.
- Huang X. Xu L. Luo X. Fan K. Ji R. Pei G. Chen K. Jiang H. Inhibitory mode of 1,5-diarylpyrazole derivatives against cyclooxygenase-2 and cyclooxygenase-1: molecular docking and 3D QSAR analyses. J. Med. Chem. 2002; 45: 4816-27
- Prasanna J. L. Deepthi B. Rama Rao N. TSP Based Matrix Tablets: Studying the Effect of Formulation Variables Employing Response Surface Methodology. Asian J. Pharm. Res. 2(3): July-Sept. 2012; Page 120-126.
- Nair A.C. Jayatilleke P. Wang X. Miertus S. Welsh W.J. Computational studies on tetrahydropyrimidine-2-one HIV-1 protease inhibitors: improving three-dimensional quantitative structure−activity relationship comparative molecular field analysis models by inclusion of calculated inhibitor- and receptor-based properties. J. Med. Chem. 2002; 45: 973.
- Joy R. A. P. Effect of Foot Reflexology on Pain among Cancer Patients in Oncology Ward, Sri Ramakrishna Hospital, Coimbatore. Asian J. Nur. Edu. and Research 1(4): Oct-Dec. 2011; Page 107-108.
- An Intelligent Resnets Resource Allocation Framework for 5G Networks
Authors
1 Department of Computer Science and Engineering, Hindusthan Institute of Technology, India., IN
2 Department of Information Technology, Karpagam Institute of Technology, India., IN
Source
ICTACT Journal on Communication Technology, Vol 14, No 1 (2023), Pagination: 2837-2842Abstract
This paper presents a resource allocation technique for industrial applications for 6G networks, which are characterised by the presence of many heterogeneous parameters that have an effect on the quality of data transmission. The purpose of the project is to achieve the greatest possible efficiency in the application of the resources that are presently while achieving a higher level of control over a diverse collection of sensing nodes operating within a hybrid network. The system model that has been proposed is a workable option for efficient resource allocation. The performance of the proposed method, in addition to similarities to the performance of other methods has been analysed. The proposed methods offer performance that is comparable to or better than the baseline, while simultaneously significantly reducing the SI exchange overhead and improving the system resilience to sensing intervals, some of which may be unavoidable in practise.Keywords
ResNets, Resource Allocation, 6G, IoT.References
- V. Saravanan, D. Saravanan and H.P. Sultana, “Design of Deep Learning Model for Radio Resource Allocation in 5G for Massive IoT Device”, Sustainable Energy Technologies and Assessments, Vol. 56, pp. 103054-103064, 2023.
- M. Sheng and J. Li, “Coverage Enhancement for 6G Satellite-Terrestrial Integrated Networks: Performance Metrics, Constellation Configuration and Resource Allocation”, Science China Information Sciences, Vol. 66, No. 3, pp. 1-20, 2023.
- J. Singh, J. Deepika and J. Sathyendra Bhat, “EnergyEfficient Clustering and Routing Algorithm Using Hybrid Fuzzy with Grey Wolf Optimization in Wireless Sensor Networks”, Security and Communication Networks, Vol. 2022, pp. 1-12, 2022.
- J. Huan and K. Yu, “Opportunistic Capacity based Resource Allocation for 6G Wireless Systems with Network Slicing”, Future Generation Computer Systems, Vol. 140, pp. 390- 401, 2023.
- Y. Robinson, E.G. Julie and P.E. Darney, “Enhanced Energy Proficient Encoding Algorithm for Reducing Medium Time in Wireless Networks”, Wireless Personal Communications, Vol. 131, pp. 3569-3588, 2021.
- R. Indhumathi and A. Pandey, “Design of Task Scheduling and Fault Tolerance Mechanism Based on GWO Algorithm for Attaining Better QoS in Cloud System”, Wireless Personal Communications, Vol. 95, pp. 1-19, 2022.
- P. Qin and S. Geng, “Content Service Oriented Resource Allocation for Space-Air-Ground Integrated 6G Networks: A Three-Sided Cyclic Matching Approach”, IEEE Internet of Things Journal, Vol. 10, No. 1, pp. 828-839, 2022.
- S.U. Jamil, “Resource Allocation and Task Off-Loading for 6G Enabled Smart Edge Environments”, IEEE Access, Vol. 10, pp. 93542-93563, 2022.
- T. Karthikeyan, K. Praghash and K.H. Reddy, “Binary Flower Pollination (BFP) Approach to Handle the Dynamic Networking Conditions to Deliver Uninterrupted Connectivity”, Wireless Personal Communications, Vol. 121, No. 4, pp. 3383-3402, 2021.
- T.Q. Duong and H. Shin, “Quantum-Inspired Machine Learning for 6G: Fundamentals, Security, Resource Allocations, Challenges, and Future Research Directions”, IEEE Open Journal of Vehicular Technology, Vol. 3, pp. 375-387, 2022.
- F.D.O. Torres, D.L. Cardoso and R.C. Oliveira, “Radio Resource Allocation in a 6G D-OMA Network with Imperfect SIC: A Framework Aided by a Bi-Objective Hyper-Heuristic”, Engineering Applications of Artificial Intelligence, Vol. 119, pp. 105830-105843, 2023.
- D.H. Tran and B. Ottersten, “Satellite-and Cache-Assisted UAV: A Joint Cache Placement, Resource Allocation, and Trajectory Optimization for 6G Aerial Networks”, IEEE Open Journal of Vehicular Technology, Vol. 3, pp. 40-54, 2022.
- H.B. Salameh and A. Al-Ajlouni, “Energy-Efficient Power-Controlled Resource Allocation for MIMO-based Cognitive-enaBled B5G/6G Indoor-Flying Networks”, IEEE Access, Vol. 10, pp. 106828-106840, 2022.
- T.K. Rodrigues and N. Kato, “Network Slicing with Centralized and Distributed Reinforcement Learning for Combined Satellite/Ground Networks in a 6G Environment”, IEEE Wireless Communications, Vol. 29, No. 1, pp. 104-110, 2022.