Refine your search
Collections
Co-Authors
Journals
Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
H, Naresh
- An Overview of Nano-Catalysts in Biodiesel Production
Abstract Views :87 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical and Automobile Engineering, CHRIST University, Bangalore -560074, IN
2 Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru- 572103, IN
1 Department of Mechanical and Automobile Engineering, CHRIST University, Bangalore -560074, IN
2 Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru- 572103, IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 8A (2022), Pagination: 8-15Abstract
Energy consumption and dependence on non-renewable resources is increasing over the years. The combustion of fossil fuels resulting in the emission of substantial amounts of CO2, NOX, SOX and some greenhouse gases. Biofuels are evolving as the primary alternatives to fossil fuels since they can be readily synthesised from discarded bioresources and yield lesser emission during the combustion process. However, the extraction of biofuels has thrown up new challenges that have widened the scope of the use of nano-particles in the synthesis of biofuels. From the literature, distinct findings concerning the use of nano-particles as a catalyst and process reactant during biodiesel production have been identified; this is majorly attributed to the fact that nano-catalysts enhance thermophysical properties, reaction speed and mass transport properties. Henceforth, the present paper aims to review, summarise and provide an insight into the research findings of effectively using nanocatalysts in biofuel production and consider the significance and its relevance for further researchers in the domain of biofuels.Keywords
Biodiesel, Nanoparticles, Reaction Speed, Mass Transport Properties.
References
- E. Atabani, A. S. Silitonga, H. C. Ong, T. M. I. Mahlia, H. H. Masjuki, I. A. Badruddin, H. Fayaz, Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production, Renew. Sustain. Energy Rev 18 (2013) 211–245. DOI: https://doi.org/10.1016/j.rser.2012.10.013
- A. L. John, K. J. Judith, V. Udaya, Optimization of biodiesel production from waste cooking oil by magnesium oxide Nano-catalyst synthesized using coprecipitation method, Clean Technol. Environ. Policy (123456789).
- Ghaffari, M. Behzad, Facile synthesis of layered sodium disilicates as efficient and recoverable Nano-catalysts for biodiesel production from rapeseed oil, Adv. Powder Technol., no. February, pp. 1–7 (2018). DOI: https://doi.org/10.1016/j.apt.2018.02.019
- Hassanpour, X. Lai, A. F. Lee, K. Wilson, Graphical abstract SC, Applied Catal. B, Environ. No. 2010 (2018).
- M. Ashraful, H. H. Masjuki, M. A. Kalam, I. R. Fattah, S. Imtenan, S. A. Shahir, H. M. Mobarak, Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review, ENERGY Convers. Manag 80 (2014) 202–228. DOI: https://doi.org/10.1016/j.enconman.2014.01.037
- Margellou, A. Koutsouki, D. Petrakis, T. Vaimakis, G. Manos, M. Kontominas, IndustrialCrops & Products Enhanced production of biodiesel over MgO catalysts synthesized in the presence of Poly-Vinyl-Alcohol (PVA), Ind. Crop. Prod. 114 (2018) 146–153. DOI: https://doi.org/10.1016/j.indcrop.2018.01.079
- S. Dawood, M. Ahmad, K. Ullah, Highlights SC, Mater. Res. Bull. (2018).
- E. Dale, “The Need for Biofuels,” no. March 2015 (2017).
- I. Ita, T. O. Magu, C. O. Ehi-eromosele, Physico-Chemical Properties of Biodiesel Obtained from Jatropha Curcas Seeds Oil Using CoMgFe2O4 and MgFe2O4 as Nano-catalysts, vol. 3, Issue no. 1, pp. 1–16 (2018).
- Chen, H.; Peng, B.; Wang, D.; Wang, J. Biodiesel production by the transesterification of cottonseed oil by solid acid catalysts. Front. Chem. Eng. China 2007, 1, 11–15. [CrossRef]. DOI: https://doi.org/10.1007/s11705-007-0003-y
- M. Lapola, R. Schaldach, J. Alcamo, A. Bondeau, J. Koch, C. Koelking, Indirect land-use changes can overcome carbon savings from biofuels in Brazil, vol. 107, no. 8, pp. 1–6 (2010). DOI: https://doi.org/10.1073/pnas.0907318107
- Spitzer, M. Comet, C. Baras, V. Pichot, N. Piazzon, Journal of Physics and Chemistry of Solids Energetic nano-materials: Opportunities for enhanced performances, J. Phys. Chem. Solids 71 (2) (2010) 100–108. DOI: https://doi.org/10.1016/j.jpcs.2009.09.010
- Dantas, Joelda et al. Use of Ni-Zn ferrites doped with Cu as a catalyst in the transesterification of soybean oil to methyl esters. Mat. Res. [online]. 2013, vol.16, n.3, pp.625-627. Epub Mar 05, 2013. ISSN 1516-1439. https://doi.org/10.1590/S1516-14392013005000031. DOI: https://doi.org/10.1590/S1516-14392013005000031
- Kabir, K. Kim, A. C. K. Yip, J. R. Sohn, Environmental impacts of nanomaterials, J. Environ. Manage 225 (May) (2018) 261–271. DOI: https://doi.org/10.1016/j.jenvman.2018.07.087
- E. Vessally, M. Babazadeh, A. Hosseinian, S. Arshadi, L. Edjlali, Nano-catalysts for chemical transformation of carbon dioxide, J. CO2 Util 21 (June) (2017) 491–502. DOI: https://doi.org/10.1016/j.jcou.2017.08.014
- Perera, “Pollution from Fossil-Fuel Combustion is the Leading Environmental Threat to Global Pe- diatric Health and Equity: Solutions Exist,” (2018). DOI: https://doi.org/10.3390/ijerph15010016
- F. Qiu, Y. Li, D. Yang, X. Li, P. Sun, Bioresource Technology Heterogeneous solid base Nano-catalyst: Preparation, characterization and application in biodiesel production, Bioresour. Technol 102 (5) (2011) 4150–4156. DOI: https://doi.org/10.1016/j.biortech.2010.12.071
- Baskar, I. A. E. Selvakumari, R. Aiswarya, Biodiesel production from castor oil using heterogeneous Ni-doped ZnO Nano-catalyst, Bioresour. Technol.
- G. Baskar, R. Aiswarya, “Trends in catalytic production of biodiesel from various feedstocks”, Renew. Sustain. Energy Rev 57 (2016) 496–504. DOI: https://doi.org/10.1016/j.rser.2015.12.101
- G. Baskar, S. Soumiya, Production of biodiesel from castor oil using iron (II) doped zinc oxide Nano-catalyst, Renew. Energy (2016) 1–7. DOI: https://doi.org/10.1016/j.renene.2016.02.068
- H. R. Harsha, M. C. Math, K. V. Yatish, Optimization and kinetic study of CaO nano-particles catalyzed biodiesel production from Bombax ceiba oil, Energy.
- H. Mazaheri, H. C. Ong, H. H. Masjuki, Z. Amini, M. D. Harrison, Rice bran oil-based biodiesel production using calcium oxide catalyst derived from Chicoreusbrunneus shell, Energy.
- H. Nayebzadeh, M. Haghighi, N. Saghatoleslami, and Fabrication of carbonated alumina doped by calcium oxide via microwave combustion method used as Nano-catalyst in biodiesel production: Influence of carbon source type, vol. 171, no. February, pp. 566–575 (2018). DOI: https://doi.org/10.1016/j.enconman.2018.05.081
- H. S. Rumana, R. C. Sharma, V. Beniwal, A. K. Sharma, “Environmental Health A retrospective approach to assess human health risks associated with growing air pollution inurbanized area of Thar Desert, western Rajasthan, India,” pp. 1–9, (2014).A. G. Azam, B. R. Zanjani, M. B. Mood, Effects of air pollution on human health and practical measures for prevention in Iran, (2016). DOI: https://doi.org/10.1186/2052-336X-12-23
- Hill, E. Nelson, D. Tilman, S. Polasky, D. Tiffany, Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels (2006). DOI: https://doi.org/10.1073/pnas.0604600103
- M. Ã. Marchetti, V. U. Miguel, A. F. Errazu, Possible methods for biodiesel production, vol. 11, pp. 1300–1311 (2007). DOI: https://doi.org/10.1016/j.rser.2005.08.006
- L. Nass, P. Antonio, A. Pereira, D. Ellis, Biofuels in Brazil: An Overview, no. December, (2007). DOI: https://doi.org/10.2135/cropsci2007.03.0166
- M. Fulton, A. Korner, I. E. Agency, The need for biofuels as part of a low carbon energy future, pp. 1–8 (2015).
- L. R. Lynd, How biotech can transform biofuels.
- L. Wen, Y. Wang, D. Lu, S. Hu, H. Han, Preparation of KF / CaO Nano-catalyst and its application in biodiesel production from Chinese tallow seed oil, Fuel 89 (9) (2010) 2267–2271. DOI: https://doi.org/10.1016/j.fuel.2010.01.028
- A. S. Garcia, C. V. R. DeMoura, S. Nicolodi, E. M. DeMoura, Synthesis, Characterization and Catalytic Evaluation of Magnetically Recoverable SrO/CoFe2O4 Nano-catalyst for Biodiesel Production from Babassu Oil Transesterification, vol. 29, no. 4, pp. 845–855 (2018).
- M. J. Borah, A. Devi, R. A. Saikia, D. Deka, Biodiesel production from waste cooking oil catalyzed by in-situ decorated TiO2 on reduced graphene oxide nanocomposite, Energy (2018). DOI: https://doi.org/10.1016/j.energy.2018.06.079
- M. Shi, P. Zhang, M. Fan, P. Jiang, Y. Dong, Influence of crystal of Fe2O3 in magnetism and activity of nanoparticles of CaO Fe2O3 for biodiesel production, Fuel 197 (2017) 343–347. DOI: https://doi.org/10.1016/j.fuel.2017.02.060
- M. Suresh, C. P. Jawahar, A. Richard, “A review on biodiesel production, combustion, performance, and emission characteristics of non-edible oils in variable compression ratio diesel engine using biodiesel and its blends, Renew. Sustain. Energy Rev 92 (March) (2018) 38–49. DOI: https://doi.org/10.1016/j.rser.2018.04.048
- Vardast, M. Haghighi, S. Dehghani, Sono-Dispersion of Calcium over Al-MCM-41 Used as a Nano-catalyst for Biodiesel Production from Sunflower Oil: Influence of Ultrasound, Renew. Energy.
- Linares, I. J. Pe, A sustainable framework for biofuels in Europe, vol. 52, pp. 166–169 (2013). DOI: https://doi.org/10.1016/j.enpol.2012.10.008
- A. Mcintyre, Common nano-materials and their use in real-world applications, vol. 95, pp. 1–22 (2012). DOI: https://doi.org/10.3184/003685012X13294715456431
- Aiswarya, Nano-catalyst for Transesterification of Fatty Acids into Biodiesel, no. October (2017).
- Ali, Biodiesel, A renewable alternate clean and environment-friendly fuel for petrodiesel engines: A REVIEW, No. May (2014).
- R. Madhuvilakkuand, S. Piraman, Bioresource Technology Biodiesel synthesis by TiO2 – ZnOmixed oxide Nano-catalyst catalyzed palm oil transesterification process, Bioresour. Technol 150 (2013) 55–59. DOI: https://doi.org/10.1016/j.biortech.2013.09.087
- R. Varghese, J. P. Henry, J. Irudayaraj, Ultrasonication-assisted Transesterification for Biodiesel Production by Using Heterogeneous ZnO Nano-catalyst, pp. 1–7 (2017).
- Alaei, M. Haghighi, J. Toghiani, B. Rahmani, Industrial Crops & Products Magnetic and reusable MgO/MgFe2O4 Nano-catalyst for biodiesel production from sunflower oil: Influence of fuel ratio in combustion synthesis on catalytic properties and performance, Ind. Crop. Prod. 117 (September 2017) (2018) 322–332. DOI: https://doi.org/10.1016/j.indcrop.2018.03.015
- S. E. E. Profile, “Effect of Diesel Emissions on Human Health: A Review,” on May 2013 (2014).
- S. Sahani, Y. C. Sharma, Economically viable production of biodiesel using a novel heterogeneous catalyst: Kinetic and thermodynamic investigations, Energy Convers. Manag, 171 (2018) 969–983. DOI: https://doi.org/10.1016/j.enconman.2018.06.059
- C. Santos-durndell, T. M. Peruzzolo, G. M. Ucoski, L. P. Ramos, Magnetically recyclable Nano-catalysts based on magnetite: an environmentally friendly and recyclable catalyst for esterification reactions, vol. 18, pp. 806–812 (2018). DOI: https://doi.org/10.18331/BRJ2018.5.2.4
- I. Report, Report, “Environmental Impacts of Petroleum Production: Initial Results from the Osage- Skiatook Petroleum Environmental Research Sites, Osage County, Oklahoma.
- Deng, Z. Fang, Y. Liu, C. Yu, Production of biodiesel from Jatropha oil catalyzed by the nanosized solid basic catalyst, Energy 36 (2) 777–784. DOI: https://doi.org/10.1016/j.energy.2010.12.043
- Chisti, Biodiesel from microalgae beats bioethanol, no. January (2008). DOI: https://doi.org/10.1016/j.tibtech.2007.12.002
- Kalanakoppal, V. Raghavendra, M. Lalithamba, H. Shankaraiah, Preparation of a CaO Nano-catalyst and Its Application for Biodiesel Production Using Buteamonosperma Oil: An Optimization Study, pp. 635–649 (2018). DOI: https://doi.org/10.1002/aocs.12079
- P. Rago, R. Mohee, D. Surroop, A Review of Thermochemical Technologies for the Conversion of Waste Biomass to Biofuel and Energy in Developing Countries, pp. 127–143 (2018). DOI: https://doi.org/10.1007/978-3-319-63612-2_8
- Y. Qin, “Studies on Indoor Air Pollution from Domestic Fuel,” pp. 1024–1029 (2002).
- Corrosion Characterization of Friction Stir Weld Dissimilar Aluminium Alloy Joints
Abstract Views :81 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical and Automobile Engineering, CHRIST (Deemed to be University), Bengaluru, Karnataka, IN
2 Dept.of Mech.Engg., MVJ College of Engg., Bengaluru, Karnataka, IN
3 Dept.of Mech.Engg., Siddaganga Institute of Technology. Tumakuru, Karnataka, IN
1 Department of Mechanical and Automobile Engineering, CHRIST (Deemed to be University), Bengaluru, Karnataka, IN
2 Dept.of Mech.Engg., MVJ College of Engg., Bengaluru, Karnataka, IN
3 Dept.of Mech.Engg., Siddaganga Institute of Technology. Tumakuru, Karnataka, IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 8A (2022), Pagination: 16-22Abstract
The course of contact mix welding is quick acquiring conspicuousness in aviation, marine and car industry because of its benefits as far as mechanical strength, effect and hardness characteristics. There is as yet a requirement for sure fire consideration from the exploration local area to erosion in grating mix welding zones, hence the work introduced here centres around the consumption portrayal of the grinding mix weld divergent aluminium composite. This study looks into friction stir welding under various parametric settings and shows how corrosion happens in a sodium chloride electrolytic media under potentio-dynamic conditions. The friction stir weld joints of dissimilar alloys aluminium are constructed using three sets of parameters. Straight cylinder, taper cylinder, and straight triangular tool profiles; tool rotational speeds of 800, 1000, and 1200 rpm; tool feed rates of 100, 120, and 140 mm/min; and tool offsets of 0.5, 0 mm, and -1.5 mm. The corrosion current (Icorr) reduces as tool rotating speed increases up to 1200 rpm, after which it slightly increases due to the creation of ridges all around the periphery of the friction stir weld area.Keywords
Potentiodynamic, Aluminium Alloys, Characterization, Corrosion, Friction Stir Welding, Dissimilar.References
- Hassan Abd El-Hafez, Abla El-Megharbel, “Friction Stir Welding of Dissimilar Aluminum Alloys”, World Journal of Engineering and Technology, vol. 6, pp. 408- 419, 2018. DOI: https://doi.org/10.4236/wjet.2018.62025
- Jitender Kundu, Hari Singh, “Friction Stir Welding of Dissimilar AL alloys: Effect of process parameters on mechanical properties”, Engineering Solid Mechanics, vol.4, pp.125-132, 2016. DOI: https://doi.org/10.5267/j.esm.2016.2.001
- Sadesh P, Venkatesh Kannan M, Rajkumar V, Avinash P, “Studies on Friction Stir welding of AA2024 and AA6061 dissimilar metals”, Procedia Engineering, vol.75, pp.145-149, 2014. DOI: https://doi.org/10.1016/j.proeng.2013.11.031
- K, Ramesha, Sudersanan PD, Santhosh N, and Sasidhar Jangam. 2021. “Design and Optimization of the Process Parameters for Friction Stir Welding of Dissimilar Aluminium Alloys”. Engineering and Applied Science Research 48 (3):257-67. https://ph01.tci-thaijo.org/index.php/easr/article/view/241021
- H.M. Rao,” Effect of process parameters on mechanical properties of friction stir spot welded magnesium to aluminum alloy”, Materials and Design, pp 235-245, 2015. DOI: https://doi.org/10.1016/j.matdes.2014.10.065
- N.F.M Selamat, A.H Baghadi, Z. Sajuri, “Friction Stir welding of similar and dissimilar aluminum alloys for automotive application”, International Journal of Automotive and Mechanical Engineering, vol.13, pp.3401-3412, 2016. DOI: https://doi.org/10.15282/ijame.13.2.2016.9.0281
- Santhosh N, Ramesha K, Mechanical and Thermal Characterization of Friction Stir Weld Joints of Al-Mg Alloy, International Journal of Research in Aeronautical and Mechanical Engineering, ETME Conference Issue, Cauvery Institute of Technology, Mandya, Dec 22-23, 2017.
- Ramesha K., Sudersanan P.D., Santhosh N., Ravichandran G., Manjunath N. Optimization of Friction Stir Welding Parameters Using Taguchi Method for Aerospace Applications. Advances in Structures, Systems and Materials. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, pp 293-306, 2020. DOI: https://doi.org/10.1007/978-981-15-3254-2_27
- Santhosh N, U N Kempaiah, Ashwin C Gowda, Corrosion Characterization of Silicon Carbide and Fly Ash Particulates Dispersion Strengthened Aluminium 5083 Composites. Journal of Catalyst & Catalysis. 4(2): pp 9 – 21, 2017.
- Sadashiva. M, H. K. Shivanand, Rajesh. M, Santhosh. N, Corrosion Behaviour of Friction Stir Welded Al 6061 Hybrid Metal Matrix Composite Plates, International Conference on Advances in Mechanical Engineering Sciences (ICAMES-17), PESCE, Mandya, Karnataka, India, 21 – 22 April 2017.
- Ramesha, K., Santhosh, N., Kiran, K. et al. Effect of the Process Parameters on Machining of GFRP Composites for Different Conditions of Abrasive Water Suspension Jet Machining. Arab J Sci Eng 44, 7933–7943 (2019). https://doi.org/10.1007/s13369-019-03973-w DOI: https://doi.org/10.1007/s13369-019-03973-w
- Santhosh N, Ranganadh Y, Satya Akash, Riti Mishra, U N Kempaiah, Ashwin C Gowda, Characterization of Aluminium 5083/SiCp/Fly Ash Hybrid Composites for Corrosion Behaviour in alkaline and acidic Medium for Potential Applications in Aerospace Components, Current trends in Carbon materials (IICS-BC & CTC), Rolls Royce Hall, AeSI, Bangalore, 08 April 2017.
- Santhosh N, Manjunath N, Mahesh H R, Potentiodynamic Corrosion Characterization of Hybrid Aluminium Composites for Advanced Engineering Applications, International Journal of Engineering and Advanced Technology (IJEAT), Vol9 Issue-3, pp.1434-1437, February, 2020. DOI: 10.35940/ijeat.C5025.029320. DOI: https://doi.org/10.35940/ijeat.C5025.029320
- K. Ramesha, P. D. Sudersanan, A. C. Gowda, N. Santhosh, S. Jangam and N. Manjunath. 2022. Friction Stir Welding of Dissimilar Aluminium Alloys for Vehicle Structures, Int. J. Vehicle Structures & Systems, 14(1), 5-9. doi:10.4273/ijvss.14.1.02. DOI: https://doi.org/10.4273/ijvss.14.1.02
- Santhosh N, Kempaiah U N, Ashwin C Gowda, Srilatha Rao, Gurumoorthy Hebbar, Evaluation of Corrosion Mechanics of Silicon Carbide and Fly Ash Reinforced Hybrid Aluminium Metal Matrix Composites, International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering, ERCAM 2017, pp 214 – 218, July 21 2017, Nitte Meenakshi Institute of Technology, Bengaluru, India.
- Ramesha K, Sudersanan, P D, Santhosh N, Sasidhar Jangam. 2021. “Corrosion Characterization of Friction Stir Weld Joints of Dissimilar Aluminum Alloys.”, EAI/Springer Innovations in Communication and Computing. https://eudl.eu/doi/10.4108/eai.16-5-2020.2304097 DOI: https://doi.org/10.4108/eai.16-5-2020.2304097
- Alfattani, R.; Yunus, M.; Mohamed, A.F.; Alamro, T.; Hassan, M.K. Assessment of the Corrosion Behaviour of Friction-Stir-Welded Dissimilar Aluminum Alloys. Materials 15, 260, 2022. https://doi.org/10.3390/ma15010260. DOI: https://doi.org/10.3390/ma15010260
- K. Ramesha, P. D. Sudersanan1, Prem Kumar Mahto, Shaikh Mohammed Ismail, Ashwin C. Gowda, N. Santhosh, and V. Umesh. Influence of heat treatment on the tensile and hardness characteristics of friction stir weld joints of dissimilar aluminium alloys. AIP Conference Proceedings 2421, 030001 (2022) DOI: https://doi.org/10.1063/5.0076766
- A Performance Study on Heat Transfer using Different Heat Sink by Experimentation and Optimization Method
Abstract Views :88 |
PDF Views:0
Authors
Affiliations
1 Assistant Professor, Department of Mechanical Engineering,Channabasaveshwara Institute of Technology, Gubbi-572216, IN
2 Professor, Department of Mechanical Engineering, RNS Intitute of Technology, Bangalore-560098, IN
3 Assistant Professor, Channabasaveshwara Institute of Technology Gubbi-572216, IN
4 Assistant Professor, Department of Mechanical Engineering, Siddaganga Institute of Technology Tumkur-572103,, IN
1 Assistant Professor, Department of Mechanical Engineering,Channabasaveshwara Institute of Technology, Gubbi-572216, IN
2 Professor, Department of Mechanical Engineering, RNS Intitute of Technology, Bangalore-560098, IN
3 Assistant Professor, Channabasaveshwara Institute of Technology Gubbi-572216, IN
4 Assistant Professor, Department of Mechanical Engineering, Siddaganga Institute of Technology Tumkur-572103,, IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 8A (2022), Pagination: 41-48Abstract
With the advancement of new technologies, the reductions of size are more in recent electronic devices, which lead to an increase in heat dissipation. Thus, the problem of electronic cooling has become a critical issue in this area. This work is based on the experimental and optimization analysis. The results from the experimental analysis are compared for different shaped heat sinks like concave and congruent made up of copper and aluminium respectively. The experiment is conducted for different heat input and the performance of the heat sink is observed. Results shows that the heat transfer coefficient is more and thermal resistance is less with concave shaped heat sink and this study on experimental performance of different shaped heat sink manifests its application in electronic devices.Keywords
Forced Convection, Heat Sink, Heat Transfer, Optimization, Taguchi.References
- Lee J. J et.al. (2019): Experimental Study on Forced Convection Heat transfer from Plate-Fin Heat Sinks with Partial Heating; Processes; 7, 772; doi:10.3390/pr7100772. DOI: https://doi.org/10.3390/pr7100772
- Dixit.A and Patil A K. (2015): Heat Transfer Characteristics of Grooved Fin Under Forced Convection; Heat Transfer Engineering; 36:16, 1409-1416, DOI:10.1080/01457632.2015.1003726 DOI: https://doi.org/10.1080/01457632.2015.1003726
- Tijaani A S and Jaffri N B. (2018): Thermal Analysis of perforated pin-fins heat sink under forced convection condition; 4th International conference on System Integrated Intelligence, Procedia Manufacturing 24 290–298 DOI: https://doi.org/10.1016/j.promfg.2018.06.025
- Abou-Ziyan H.Z et.al., (2016): Enhancement of forced convection in wide cylindrical annular channel using rotating inner pipe with interrupted helical fins; International Journal of Heat and Mass Transfer 95 996–1007, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015. 12.066 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.066
- Shen.B et.al., (2017): Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams; International Journal of Heat and Mass Transfer 113 1043–1053, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017. 06.004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.004
- Yabo,W et.al., (2019): Effects of the location of the inlet and outlet on heat transfer performance in pin fin CPU heat sink; Applied Thermal Engineering 151 506–513, https://doi.org/10.1016/j.applthermaleng.2019.02.0 30 DOI: https://doi.org/10.1016/j.applthermaleng.2019.02.030
- TawatSamana et.al., (2014): Enhancement of fin efficiency of a solid wire fin by oscillating heat pipe under forced convection; Case Studies in Thermal Engineering 2 36–41, http://dx.doi.org/10.1016/j.csite.2013.10.003 DOI: https://doi.org/10.1016/j.csite.2013.10.003
- Yeom. T et.al., (2016): High-frequency translational agitation with micro pin-fin surfaces for enhancing heat transfer of forced convection; International Journal of Heat and Mass Transfer 94 354–365, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015. 11.054. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.054
- Hashemian. M et.al., (2017): Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form; Applied Thermal Engineering 118 408–417, http://dx.doi.org/10.1016/j.applthermaleng.2017.02.095 DOI: https://doi.org/10.1016/j.applthermaleng.2017.02.095
- Iqbal.Z et.al., (2013): Optimal fin shape in finned double pipe with fully developed laminar flow; Applied Thermal Engineering 51 1202e1223, http://dx.doi.org/10.1016/j.applthermaleng.2012.10.036. DOI: https://doi.org/10.1016/j.applthermaleng.2012.10.036
- Silva M.J et.al., (2017): Forced convection on grey cast iron plate-fins: Prediction of the heat transfer coefficient; International Communications in Heat and Mass Transfer 81 1–7, http://dx.doi.org/10.1016/j.icheatmasstransfer.2016. 11.007. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2016.11.007
- Diani.A et.al., (2013): An assessment on air forced convection on extended surfaces: Experimental results and numerical modelling, International Journal of Thermal Sciences 67 120e134, http://dx.doi.org/10.1016/j.ijthermalsci.2012.11.01 2. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.11.012
- González A.M. et.al., (2019): A hybrid numerical-experimental analysis of heat transfer by forced convection in plate-finned heat exchangers; Applied Thermal Engineering 148 363–370, https://doi.org/10.1016/j.applthermaleng.2018.11.0 68 DOI: https://doi.org/10.1016/j.applthermaleng.2018.11.068
- Deshmukh P.A. and Warkhedkar R.M., (2013): Thermal performance of elliptical pin fin heat sink under combined natural and forced convection; Experimental Thermal and Fluid Science 50 61–68, http://dx.doi.org/10.1016/j.expthermflusci.2013.05. 005 DOI: https://doi.org/10.1016/j.expthermflusci.2013.05.005
- Sheikholeslami. M. et.al., (2016): Experimental study on turbulent flow and heat transfer in an air to water heat exchanger using perforated circular- ring; Experimental Thermal and Fluid Science 70 185–195, http://dx.doi.org/10.1016/j.expthermflusci.2015.09. 002. DOI: https://doi.org/10.1016/j.expthermflusci.2015.09.002
- Al-Sarkhi. A and Abu-Nada. E, (2005): Characteristics of forced convection heat transfer in vertical internally finned tube; International Communications in Heat and Mass Transfer 32 557–564, doi:10.1016/j.icheatmasstransfer.2004.03.015. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2004.03.015
- Ibrahim T K. et.al., (2018): Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer; International Journal of Heat and Mass Transfer 118 832–846, DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.047 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.047
- Chang S.W. et.al., (2017): Heat transfer enhancement of vertical dimpled fin array in natural convection; International Journal of Heat and Mass Transfer 106 781–792, doi: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016. 09.094 DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.094
- Ayli.E.et.al., (2016): Experimental investigation and CFD analysis of rectangular profile FINS in a square channel for forced convection regimes; International Journal of Thermal Sciences 109 279e290, DOI: http://dx.doi.org/10.1016/j.ijthermalsci.2016.06.02 1. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.06.021
- Maji..A.et.al, (2019): Thermal Analysis for Heat Transfer Enhancement in Perforated Pin Fins of Various Shapes with Staggered Arrays; Heat Transfer Engineering, 40:3-4, 295-319 DOI:10.1080/01457632.2018.1429047 DOI: https://doi.org/10.1080/01457632.2018.1429047
- Buyruk..E and Karabulut. K, (2020): Research of Heat Transfer Augmentation in Plate Fin Heat Exchangers Having Different Fin Types; ISSN 1810-2328, Journal of Engineering Thermophysics, Vol. 29, No. 2, pp. 316–330.DOI: 10.1134/S1810232820020137 DOI: https://doi.org/10.1134/S1810232820020137
- Yifan Li et.al, (2017): Effect of geometric configuration on the laminar flow and heat transfer in microchannel heat sinks with cavities and fins; Numerical Heat Transfer, Part A: Applications, 71:5, 528-546. DOI: 10.1080/10407782.2016.1277940. DOI: https://doi.org/10.1080/10407782.2016.1277940
- Osama A. et.al., (2021): Heat Transfer Enhancement in a Double Pipe Heat Exchanger Using Different Fin Geometries in Turbulent Flow; Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 45:461– 471, 45:461–471, https://doi.org/10.1007/s40997-020-00377-2. DOI: https://doi.org/10.1007/s40997-020-00377-2
- Shadlaghani .A, et.al, (2016): Optimization of triangular fins with/without longitudinal perforate for thermal performance enhancement, Journal of Mechanical Science and Technology 30 (4) 1903~1910, DOI 10.1007/s12206-016-0349-5.
- Finite Element Analysis of Hybrid Skin Sandwich Composite
Abstract Views :87 |
PDF Views:0
Authors
Akhilesh Rao
1,
Niranjana S.J.
1,
Shivakumar S
1,
Kiran K
1,
Sharathchandra
2,
Naresh H
3,
Sampath H.P.
4
Affiliations
1 Department of Mechanical and Automobile Engineering, CHRIST University, Bangalore -560074, IN
2 Department of Mechanical Engineering, NMAM Institute of Technology, Nitte 574110, Karnataka, IN
3 Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur 572103, Karnataka, IN
4 Department of Mechanical Engineering, VTU, Bangalore, Karnataka, IN
1 Department of Mechanical and Automobile Engineering, CHRIST University, Bangalore -560074, IN
2 Department of Mechanical Engineering, NMAM Institute of Technology, Nitte 574110, Karnataka, IN
3 Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur 572103, Karnataka, IN
4 Department of Mechanical Engineering, VTU, Bangalore, Karnataka, IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 8A (2022), Pagination: 188-199Abstract
Sandwich structured composite is a particular classification in composite materials. This type of structure has been mainly used in recent studies because of its high specific strength, low density, and stiffness. It is increasingly more commonly employed in structural designs due to its features and performance. The sandwich composites used in this investigation are made of aluminium alloys and areca fibre. The sandwich composite’s face sheet comes in a variety of thicknesses. The adhesive skin layer is also varied to investigate the effect of using natural fibre. The sandwich composite is subjected to 3 point bend test. The modal analysis is investigated using the finite element method. The 3D model of sandwich composites is modelled using solid works 2020. Using Altair Hyper Works, the boundary conditions and meshing is carried out. ANSYS Mechanical APDL is used to analyse the sandwich composites. This investigation analyses the behaviour of composite sandwich beams.Keywords
Sandwich Structured Composite, Aluminium Alloy, Areca Fibre, ANSYS Mechanical APDL.References
- Yang, B.Wang, Z .Zhou. L, Zhang.J, Tong.L, Liang, “Study on the low-velocity impact response and CAI behaviour of foam-filled sandwich panels with hybrid facesheet”. Composite Structure (2015).https://doi.org/10.1016/j.compstruct.2015.07.058. DOI: https://doi.org/10.1016/j.compstruct.2015.07.058
- A.G.Mamalis, D.E Manolakas, M.B. Ionnaidis, D.P.Papapostolou, on the “compression of hybrid sandwich composites panels reinforced with internal tube inserts”. Composite Structures volume 56:2002. (191-199). DOI: https://doi.org/10.1016/S0263-8223(02)00003-X
- Jae Hoon Kim, Young. Shin Lee, Byoung Jun. Park, Duck, “Mechanical Behaviour of Composite Sandwich Panels in Bending After Impact” University of Twente)
- Satheesh.M, Pugazhvadivu. M, “Investigation on physical and mechanical properties of Al6061-Silicon Carbide (SiC)/Coconut shell ash (CSA) hybrid composites”. Physica B: Condensed Matter, 572(), 70–75 :( 2019). https://doi:10.1016/j.physb.2019.07.058. DOI: https://doi.org/10.1016/j.physb.2019.07.058
- Chavhan, Ganesh R.; Wankhade, Lalit N.” Improvement of the mechanical properties of hybrid composites prepared by fibers, fiber-metals, and Nano- filler particles – A review”. Materials Today: Proceedings-S2214785319332316: (2019).https://doi:10.1016/j.matpr.2019.08.240. DOI: https://doi.org/10.1016/j.matpr.2019.08.240
- Jezrael Rossetti; Moni Ribeiro Filho, Sergio Luiz; Christoforo, Andre´ Luis; Panzera, Tulio Hallak; Scarpa, Fabrizio. “Investigations on sustainable honeycomb sandwich panels containing eucalyptus sawdust, Piassava and cement particles”Thin-Walled Structures (2019), 143(),106191.https://doi:10.1016/j.tws.2019.106191. DOI: https://doi.org/10.1016/j.tws.2019.106191
- Hassan Abdolpour, Julio Garzon-Roca and Pouya HMH Mameghani “Increasing flexural performance of hybrid sandwich panels by using strain hardening cementitious base composite and glass fiber-reinforced polymer” Journal of Composite Materials 2019, Vol. 53(1) 19_31.https://doi.org/10.1177/0021998318780206. DOI: https://doi.org/10.1177/0021998318780206
- ZU, Guo-yin; LU, Ri-huan; LI, Xiao-bing; ZHONG, Zhao-yang; MA, Xing-jiang; HAN, Ming-bo; YAO, Guang-chun. “Three-point bending behavior of aluminum foam sandwich with steel panel”. Transactions of Nonferrous Metals Society of China, 23(9), 2491–2495 (2013). https://doi:10.1016/S1003-6326(13)62759-4. DOI: https://doi.org/10.1016/S1003-6326(13)62759-4
- M.J. Mochane1, T.C. Mokhena, T.H. Mokhothu, A.Mtibe, E.R.Sadiku1, S.S.Ray, I.D. Ibrahim, O.O.Daramola. “Recent progress on natural fiber hybrid composites for advanced applications” (2019).https://doi.org/10.3144/expresspolymlett.2019.15 DOI: https://doi.org/10.3144/expresspolymlett.2019.15
- Nicolas J. Lombardi; Judy Liu . “Glass fiber-reinforced polymer/steel hybrid honeycombsandwich concept for bridge deck applications” Composite structure Volume -93(4), 1275–1283 (2011). https://doi:10.1016/j.compstruct.2010.10.007. DOI: https://doi.org/10.1016/j.compstruct.2010.10.007
- Zanagan, Sartip and Epaarachchi, Jayantha and Ferdous, Wahid and Leng, Jin-song. “A novel hybridised composite sandwich core with glass, kevlar and zylon fibres – investigation under low-velocity impact”. International Journal of Impact Engineering, 137:103430. pp. 1-10. ISSN 0734-743X.(2020) DOI: https://doi.org/10.1016/j.ijimpeng.2019.103430
- Yu-Chien Ho, Jun Yanagimoto. “Effect of unidirectional prepreg size on punching of pseudo-ductile CFRP laminates and CFRP/metal hybrid composites”(16 November-2017). https://doi.org/10.1016/j.compstruct.2017.11.042. DOI: https://doi.org/10.1016/j.compstruct.2017.11.042
- Ryu, Jaeho; Kim, Yong Yeal; Park, Man Woo; Yoon, Sung-Won; Lee, Chang- Hwan; Ju, Young K. “Experimental and numerical investigations of steel- polymer hybrid floor panels subjected to three-point bending”. Engineering Structures, 175,467–482:(2018). https://doi:10.1016/j.engstruct.2018.08.030 DOI: https://doi.org/10.1016/j.engstruct.2018.08.030
- Kharghani, N; Guedes Soares, C. “Experimental and numerical study of hybrid steel-FRP balcony overhang of ships under shear and bending”. Marine Structures, 60, 15–33 (2018). https://doi:10.1016/j.marstruc.2018.03.003 DOI: https://doi.org/10.1016/j.marstruc.2018.03.003
- E. Atabani, A. S. Silitonga, H. C. Ong, T. M. I. Mahlia, H. H. Masjuki, I. A. Badruddin, H. Fayaz, Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production, Renew. Sustain. Energy Rev 18 (2013) 211–245. DOI: https://doi.org/10.1016/j.rser.2012.10.013
- Niranjana SJ, Patel SV, Dubey AK. Design and analysis of vertical pressure vessel using ASME code and FEA technique. IOP Conf Ser, Mater Sci Eng. 2018;376:012135(012135):1–10. https://doi.org/10.1088/1757-899X/376/1/012135. DOI: https://doi.org/10.1088/1757-899X/376/1/012135
- S. J. Niranjanaa*, S. S. Kubsadb, S. Manjunathac, Y. Nagarajd, I. Bhavie , B. M. Angadie , A. J. Chamkhaf, M. B. Vanarottig,” Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System”. International Journal of Engineering. IJE Transactions C: Aspects Vol. 35, No. 03, (March 2022) 572-579. Doi: 10.5829/ije.2022.35.03c.10. DOI: https://doi.org/10.5829/IJE.2022.35.03C.10
- Shravanabelagola Jinachandra N, Sadashivappa Kubsad S, Sarpabhushana M, Siddaramaiah S, Rajashekaraiah T. Modeling and computational fluid dynamic analysis on a non-AC bus coach system. Heat Transfer. 2020;1–8. https://doi.org/10.1002/htj.21857. DOI: https://doi.org/10.1002/htj.21857
- S. M. Darshan and B. Suresha, “Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites” in Material Science Forum, January 2021, Vol.1048, Page No. 21-32, ISSN-1662-9752. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1048.21
- S. M. Darshan and B. Suresha, “Role of Silk Fibre Loading on Physico-Mechanical properties of Epoxy Composites”, in Journal of Natural fibers-Taylor and Francis, June 2021, Page No.1.13, ISSN15440478, doi:10.1080/15440478.2021.1921654. DOI: https://doi.org/10.1080/15440478.2021.1921654
- Reddy, P. S., Kesavan, R., & Vijaya Ramnath, B. “Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite. Silicon”, 10(2), 495, 502(2017). https://doi.org/10.1007/s12633-016-9479-8. DOI: https://doi.org/10.1007/s12633-016-9479-8
- Siddiqui, R. A., Abdullah, H. A., & Al-Belushi, K. R. (2000). Influence of aging parameters on the mechanical properties of 6063 aluminium alloy. Journal of Materials Processing Technology, 102(13),234240.https://doi.org/10.1016/s0924-0136(99)00476-8.