Refine your search
Collections
Co-Authors
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Hemachandra Reddy, K.
- Design of Loop Layout with Integrated Batch Scheduling in Flexible Manufacturing System: An Approach of Stochastic Heuristics
Abstract Views :277 |
PDF Views:5
Authors
Affiliations
1 Department of Mechanical Engineering, Ballari Institute of Technology and Management, Bellary, Karnataka, IN
2 Department of Mechanical Engineering, Brindavan Institute of Technology and Science, Kurnool 518001, A.P., IN
3 Department of Mechanical Engineering, JNTU, Anantapur-515001, IN
1 Department of Mechanical Engineering, Ballari Institute of Technology and Management, Bellary, Karnataka, IN
2 Department of Mechanical Engineering, Brindavan Institute of Technology and Science, Kurnool 518001, A.P., IN
3 Department of Mechanical Engineering, JNTU, Anantapur-515001, IN
Source
Artificial Intelligent Systems and Machine Learning, Vol 5, No 1 (2013), Pagination: 1-7Abstract
FMS’s seems to be a very promising technology as they provide flexibility, which is essential for many manufacturing companies. FMS can yield a number of dissimilar jobs simultaneously. Each part requires different operations in a certain sequence and workstations can typically perform a variety of operations. In this paper, multi-objective optimization related to FMS scheduling which act as a constraint in configuring the loop layout in optimum manner by various evolutionary algorithms such as Metaheuristics like PSO, SA etc. The first one is connected with batch scheduling problem (BSP). The next objective is emphasis on determination of optimum machine sequence with minimum total transportation cost. In this paper the authors made an attempt to consider machine arrangements in an optimum sequence with flexible batch scheduling as constraints in an FMS. The various loop layout problems are tested for enactment of objective function with respect to computational time and number of iterations involved in SA and PSO. A necessary code is generated in C++ and the code is run by the IDE tool in which C++ compiler used as plug in. The results of the above optimization algorithms are tabulated and it is concluded that for make span PSO is better than SA, whereas for total transportation cost SA is better than PSO.Keywords
Flexible Manufacturing Systems, Particles Warm Method, Simulated Annealing, Transportation Cost.- Development of Co-Ordinate Retrieval System in CAD for Satellite Component by Shear Forming Process
Abstract Views :213 |
PDF Views:1
Authors
Affiliations
1 M V S R Engg. College, Nadergul, Hyderabad, IN
2 J N T U College of Engg, Anantapur, IN
3 Mechanical Engg Dept, M V S R Engg. College, Nadergul, Hyderabad, IN
1 M V S R Engg. College, Nadergul, Hyderabad, IN
2 J N T U College of Engg, Anantapur, IN
3 Mechanical Engg Dept, M V S R Engg. College, Nadergul, Hyderabad, IN
Source
Manufacturing Technology Today, Vol 12, No 3 (2013), Pagination: 5-9Abstract
Metal forming involves deforming of metal plastically into various derived shapes and sizes under the effect of externally applied forces. Flow forming is an advanced, near net shape, chipless metal forming process, which employs an incremental rotary point deformation technique for manufacturing seamless, dimensionally precise, tubular and other rotationally symmetrical products. In shear forming process deformation is carried out by combination of axial and radial forces using a set of rollers thf coordinate retrieval system using AUTO LISP for bottle neck shaped inner shell cylinder of a missile which is used for a critical space application. The experimentation consists of two stages ,i.e. Flow turning of cone with 36º included angle fromat are simultaneously moved along the length of the rotating preform. The present paper discusses on development o input Size blank of 400 x 400 x 16mm and then Spinning of cone to inner shell cylinder by spinning (3 or 4 Passes). The earlier method of development of component was a manual feeding of coordinates. This involves painstakingly measuring distances in the CAD drawing with reference to the equipment, whose axes are at an angle of 120° to one another. This process of manual retrieval of coordinates to be entered require a laborious 18hrs of operator time for every new trial. Auto Lisp, a standard feature of AutoCAD, which enables us to introduce a special command with customized output. A standard program in Auto Lisp, which gives only the end points of a polyline, was re-written to give coordinates of points at every 1 mm. This developed system brings down operator time per cycle from 18hrs to less than 15 min. and also minimizes the human error. After successful execution of the program the coordinate values thus obtained are used for the development of prototype in copper alloy and also in the development of actual material.Keywords
Metal Spinning, AUTO LISP , Co-Ordinate Retrieval System.- A Review on Simulation of Multi Pass Spinning Process
Abstract Views :271 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, IN
2 Department of Mechanical Engineering, JNTUA, Anantapuram, IN
1 Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, IN
2 Department of Mechanical Engineering, JNTUA, Anantapuram, IN
Source
Manufacturing Technology Today, Vol 17, No 8 (2018), Pagination: 3-6Abstract
Sheet metal spinning process is a plastic working technology and is frequently used for manufacturing axisymmetric shapes. Sheet metal spinning has developed significantly and spun products have widely used for various industrial applications. In the current paper a review is carried on finite element simulation of multi-pass spinning with different path profiles and multi-domain techniques of simulation process. It is also proposed scope for new tool geometries for metal spinning process.Keywords
Metal Spinning, Multi-Pass, Simulation, Multi-Domain.References
- Sebastiani, G; Brosius, A; Homberg, W; Kleiner, M: Process characterization ofsheet metal spinning by means of finite elements. Key Eng Mater, 2007; 334:637–44.
- Lin Wang; Hui Long: Investigation of material deformation in multi-pass conventional metal spinning, 'Materials and Design', 32, 2011, 2891– 2899
- G. Sebastiani, A. Brosius, R. Ewers ,M. Kleiner, C. Klimmekb “Numerical investigation on dynamic effects during sheet metal spinning byexplicit finiteelementanalysis” Journal of Materials Processing Technology 177 (2006) 401–403
- E Quigley and J Monaghan “Finite element modelling of conventional spinning using multi domain models” Journal of Materials Processing Technology 124(2002) 360-365
- L. Motgharea, C.C. Handab, Rakesh L Himtec, “Spinning And Flow Forming Processes In Manufacturing Industries: A Review” International Journal of Mechanical And Production Engineering, ISSN: 2320-2092,Volume- 5, Issue-11, Nov.-2017
- Gajanana, S; Devaki Devi, K; Vishweshwar, N: Development of Satellite ComponentThrough Flow Forming Process, ‘InternationalJ. of Multidisp. Research &Advcs. In Engg.(IJMRE), ISSN 0975-7074’, vol. 3, no. IV,October 2011, 271-284.
- Ravikumar, B; Dr. Gajanana, S; Dr. Hemachandra Reddy, K and Nigam, K N: Development Of Co-Ordinate Retrieval System In Cad For Satellite Component By Shear Forming Process, 'Manufacturing Technology Today', March 2013
- Development of Regression Model for Spinning force Using Parabolic Mandrel
Abstract Views :267 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, IN
2 Department of Mechanical Engineering, JNTUA, Anantapuram, IN
1 Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, IN
2 Department of Mechanical Engineering, JNTUA, Anantapuram, IN
Source
Manufacturing Technology Today, Vol 17, No 8 (2018), Pagination: 22-29Abstract
Metal forming involves deforming of metal physically into various derived shapes and sizes under the effect of externally applied forces. Flow forming is an advanced, near net shape, chip less metal forming process, which employs an increment rotary point deformation technique for manufacturing seamless, dimensionally precise tubular and other rotationally symmetrical products. Spinning is an advanced continuous and local metal forming process, which is widely used in many fields due to its advantages of flexibility, high quality and low cost. It is frequently used for manufacturing axisymmetric shapes where press tooling might not be justified on grounds of size and production volumes. It also has the possibility of producing parts that could not be deep drawn. Initial workpiece shape is either a flat blank or a preformed hollow component. It is characteristic of this process that the deformation does not occur in an annular zone around the axis of rotation but that the tools act upon a much localized area in which plastic flow takes place. During spinning tools are moved relative to the rotating workpiece. In this paper, a Regression model showing the relation among input process parameters, Mandrel speed (rpm), Roller type and Thickness of sheet (mm) and output response spinning force is developed using full factorial design of experiments conducted on Aluminum 2024-T3 sheets with parabolic mandrel. Contribution of each factor on output is determined by Analysis of Variance (ANOVA).Keywords
Metal Spinning, Factorial Design of Experiments, ANOVA, Spinning Force.References
- B.Ravikumar, S.Gajanana, K.Hemachandra Reddy and K.N Nigam,” Development of CoOrdinate Retrieval System in CAD For Satellite
- S.Gajanana, K.Devaki Devi “Development of Satellite Component Through Flow Forming Process „, International Journal of Multidisp. Research & Advcs. In Engg. (IJMRE), Vol.3, No.IV, October 2011.
- El-Khabeery, M. M., Fattouh, M., El-Sheikh, M. N., Hamed, O. A., 1991. On the conventional simple spinning of cylindrical aluminium cups. International Journal of Machine Tools and Manufacture, 31, 203–219
- Kalpakcioglu, S., 1961. A Study of ShearSpinnability of Metals. Journal of Engineering for Industry, 83, 478
- Kobayashi, S., 1963. Instability in the conventional spinning of cones. Journal of Manufacturing Science and Engineering, 85, 44–48.
- Kawai, K., Yang, L., Kudo, H., 2001. A flexible shear spinning of truncated conical shells with a general-purpose mandrel. Journal of Materials Processing Technology, 113, 28–33.
- Music, O., Allwood, J. M., Kawai, K., 2010. A review of the mechanics of metal spinning. Journal of Materials Processing Technology, 210, 3–23
- Music, O., Allwood, J. M., 2010. A review of the mechanics of metal spinning. Journal of materials processing, 210, 3–23
- Music, O., Allwood, J. M., 2011b. Tool-path Design for Metal Spinning. Proceedings of the 10th International Confernece on Technology of Plasticity, Aachen, Germany, pp. 542–547.
- Liu, J., Yang, H., Li, Y., 2002. A study of the stress and strain distributions of first-pass conventional spinning under different roller-traces. Journal of Materials Processing Technology, 129, 326–329
- Investigation of Al 2024 Metal Spinning on Surface Roughness using Conical Mandrel
Abstract Views :249 |
PDF Views:0
Authors
Affiliations
1 MVSR Engineering College, Hyderabad, Andhra Pradesh, IN
2 AP State Council for Higher Education, Vijayawada, Andhra Pradesh, IN
1 MVSR Engineering College, Hyderabad, Andhra Pradesh, IN
2 AP State Council for Higher Education, Vijayawada, Andhra Pradesh, IN