A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Y, Amruth
- Performance and Comparison of Coated and Uncoated Tool Inserts in Machining of C45 Steel
Authors
1 CMR Institute of Technology, Bangalore 560066., IN
2 CIT, Mandya 571401,, IN
3 JSS STU, SJCE, Mysuru 570006, Karnataka, India., IN
Source
Journal of Mines, Metals and Fuels, Vol 70, No 10A (2022), Pagination: 116-122Abstract
Using coated and uncoated tool inserts, the machining operation is carried out on C45 steelto analyze and compare the tool performance. A study was done on C45 steel, its carboncontent ranges from 0.40 to 0.50 percent.C45 steel has traces of molybdenum, silicon,silicon dioxide, manganese, and phosphorus. In this work, comparison was made betweencoated and uncoated tool inserts for different samples of C45 steel which is having Sulphurand Phosphorus of varying percentage. As samples were obtained, they were converted tothe desired diameter and examined at various feed rates (0.125, 0.175, and 0.225 mm/min),cutting speeds (11.0, 15.58, and 19.47 m/min), and cut depth (0.5, 1and 1.5mm). Wear andtool tip temperature were looked at and contrasted. Findings indicated that the coated toolinserts used for machining has a good and better properties compared to uncoated toolinserts. Therefore, these traces in a small enough quantity produce superior outcomes.Additionally, the behavior of the material andhow it affected thecharacteristics ofthetooland work sample wereexaminedUsingSEMand EnergyDispersiveX-Ray analysis.
Keywords
C45 Steel, Temperature, Wear Surface and SEM T.
References
- M. Riaz, N.Atiqah “The Mechanical Properties of S45c Medium Type Carbon Steel Specimen sunder Lathe Machining and Quenching Conditions” IJRET, eISSN:2319-1163| pISSN:2321–7308.
- Changyou Li ,Weibing Dai, Fei Duan, Yimin Zhang and David” Fatigue Life Estimation of Medium-Carbon Steel with Different surface roughness” Journal of applied sciences, Published:29 March2017.
- Debanshu Bhattacharya “Effect of Sulfur and Zirconium on the Machinability and Mechanical Properties of AISI1045 Steels”June 1981,Volume12, Issue 6, pp973–985.
- Horsfall, O., UKO, E., & Davies, D. Statistical Analysis on Corrected Well-log Derived Temperatures in South-Eastern Niger delta. Richard Gundalch, Matthew Meyer, Leonard Winardi “Influence of Mn and S on the properties of cast ironpart-3-Testing and Analysis” Copyright©2015 American Foundry Society.
- Farag Abdallah, Sabreen A. Abdelwahab, Wael. A. Aly, Ibrahim Ahmed “Influence of Cutting Factors on the Cutting Tool Temperature and Surface Roughness of Steel C45 during Turning Process Influence of cutting factor on the cutting tool temperature and surface roughness of steel C45 during Turning process”volume6, issue-01, IRJET,2019Volume: 06 Issue: 01|Jan201,
- Dr. Srikantappa. A. S, Shiva kumara. C. M, Adaveesha. B “Tool Characteristics for better Performance in machining OHNS Steelusing Tungsten Carbidetoolinserts” ICIMA2018-P2-3003-IJMMM.
- Eugene E. Feldshtein and Szymon Wojciechowski “Wear of carbide inserts during turning of C45 steel in dry cutting conditions and in presence of emulsion mist” E3S Web of Conferences 19, 03009 (2017) DOI: 10.1051/e3sconf/20171903009 EEMS 2017.
- Hogmark, S., Jacobson, S., Larsson, M., Design and evaluation of tribological coatings, Wear 246 (2000)
- Holmberg, K., Matthews, A., Ronkainen, H., Coatings tribology - contact mechanisms and surface design, Tribology International 31 (1998) 107-120.
- Carlsson, T. E., Strand, F., Lindstrom, B., Statistical model for prediction of tool life as a basis for economical optimization of the cutting process, CIRP Annals 41 (1992) 79-82.