Refine your search
Collections
Journals
Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Muthuraja, A.
- Indian Energy Scenario, Biodiesel Oxidation, Impact on Fuel System and Engine Performance & Emission Characteristics – A Review
Abstract Views :191 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical Engineering, Sandip University, Nashik, Maharasthra, IN
2 Department of Mechanical Engineering, Sandip Institute of Engineering and Management, Nashik, Maharashtra, IN
1 Department of Mechanical Engineering, Sandip University, Nashik, Maharasthra, IN
2 Department of Mechanical Engineering, Sandip Institute of Engineering and Management, Nashik, Maharashtra, IN
Source
Manufacturing Technology Today, Vol 19, No 1-2 (2020), Pagination: 36-44Abstract
The research in searching of new feedstock and biodiesel has mainly been focused on economical use and increasing blend proportion, and its impact analysis and optimization for the last one and half decades. But recent researches and their findings approaches to favor on understanding and popularization for biodiesel. In the present work, literatures were cited from years 2010 to 2019, and reviewed production and sale of automobile also energy scenario of India, biodiesel performance on an engine, fuel supply system components and oxidation stability. It was found that negative or no change, majority of them reported the reduction in HC, CO, CO2 and NOx emission with use of biodiesel, but simultaneously higher fuel consumption, exhaust gas temperature, lower heat release rate and power from available literature. The wear rate and injector clogging and fuel filter plugging problems are also reported in the favor of use of biodiesel.Keywords
Biodiesel, Emissions, Oxidation, Fouling.References
- Bawane, R. K., Muthuraja, A., Shelke, G. N., Gangele, A. (2020). Impact analysis of CalophyllumInophyllum oil biodiesel on performance and emission characteristic of diesel engine under variation in compression ratio, engine load, and blend proportion. International Journal Of Ambient Energy, doi.org/10.1080/01430750.2020.1730955.
- Aninidita, K., Karmakar, Subrata., Mukherjee, S. (2010). Properties of various plants and animals feedstocks for biodiesel production. Bioresource Technology, 101(9), 7201–7210.
- Nada, E.M., ElSolh. (2011). The Manufacture of Biodiesel from the used vegetable oil [Unpublished M. S. Research thesis]. Cairo University.
- India. Central Electricity Authority. (2018). Load Generation Balance Report – LGBR.
- India. NITI Ayog & World Energy Council. (2018). Zero Emission Vehicles (ZEVs): Towards A Policy Framework
- Asaithambi G., Treiber M., Kanagaraj V. (2019). Life Cycle Assessment of Conventional and Electric Vehicles. In: Palocz-Andresen M., Szalay D., Gosztom A., Sípos L., Taligás T. (eds) International Climate Protection. Springer, Cham. https://doi.org/10.1007/978-3-030-03816-8_21.
- Adaileh, W.M., & AlQdah, K.S. (2012). Performance of Diesel Engine Fuelled by a Biodiesel Extracted from a Waste Cocking Oil. Energy Procedia 18, 1317- 1334. doi : 10.1016/j.egypro.2012.05.149.
- Xue, Jinlin., Grifit , Tony E., Hansen, Alan. (2011). Effect of biodiesel on engine performances and emissions. Renewable & Sustainable Energy Reviews, 15(2), 1098- 1116. doi:10.1016/j.rser.2010.11.016.
- Nanthagopal, N.K., Ashok, B., Balusamy, S., Pathy, M., Sahil, G., Atluri, R., Nabi, Md., Rasul, M. (2019). Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine. Fuel, 239, 862-873. 10.1016/j.fuel.2018.11.037
- Mohan, T.R., Murugumohan, K., (2012). Tamanu oil - an alternative fuel for variable compression ratio engine. International Journal of Energy & Environmental Engineering, 3(1).
- Dharmaraja, J., Nguyen, D., Shobana, S., Saratale, G., Arvindnarayan, S., Atabani, A.E., Chang, S.W, & Kumar, G. (2018). Engine performance, emission and bio characteristics of rice bran oil derived biodiesel blends. Fuel, 239, 153-161. 10.1016/j.fuel.2018.10.123.
- Xiao, H., Yang, X., Hou, B., Wang, R., Xue, R., & Ju, H. (2019). Combustion performance and pollutant emissions analysis of a diesel engine fuelled with biodiesel and its blend with 2-methylfuran. Fuel, 237, 1050-1056.
- Manigandan, S., Gunasekar, P., Devipriya, J., & Nithya, S. (2019). Emission and injection characteristics of corn biodiesel blends in diesel engine. Fuel, 235 , 723–735.
- Raman, L.A., Deepanraj, B., Rajakumar, S., Sivasubramanian, V. (2019). Experimental investigation on performance, combustion and emission analysis of a direct injection diesel engine fuelled with rapeseed oil biodiesel. Fuel, 246 , 69–74.
- Adaileh, W.M., & AlQdah, K. S. (2012). Performance of Diesel Engine Fuelled by a Biodiesel Extracted from a Waste Cocking Oil. Energy Procedia, 18, 1317- 1334. doi : 10.1016/j.egypro.2012.05.149.
- Chaurasiya, P. K., Singh, S. K., Dwivedi, R., Choudri, R. V. (2019)Combustion and emission characteristics of diesel fuel blended with raw jatropha, soybean and waste cooking oils. Heliyon. 5(5), doi.org/10.1016/j.heliyon.2019.e01564.
- Abed, K.A., Gad, M.S., El Morsi, A.K., Sayed, M.M., & Elyazeed, S.A. (2019). Effect of biodiesel fuels on diesel engine emissions. Egyptian Journal of Petroleum, 28(2), 183–188. https://doi.org/10.1016/j.ejpe.2019.03.001
- Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., & Norhasyima, R.S. (2011). Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A review. Renewable and Sustainable Energy Reviews, https://doi.org/10.1016/j.rser.2011.05.005
- Santos, B., Capareda, S., & Capunitan, J. (2013). Engine Performance and Exhaust Emissions of Peanut Oil Biodiesel. Journal of Sustainable Bioenergy Systems, 03, 272-286. 10.4236/jsbs.2013.34037.
- Nahian, Md. Rafsan & Islam, Md. Nurul & Khan, Shaheen. (2016, December). Production of Biodiesel from Palm Oil and Performance Test with Diesel in CI Engine. In International Conference on Mechanical, Industrial and Energy Engineering (Bangladesh).
- Shailaja, M., ArunaKumari, A., Raju, Sita Rama A. V.(2013, September). Performance Evaluation of a Diesel Engine with Sesame Oil Biodiesel and its Blends with Diesel. International Journal of Current Engineering and Technology.
- Shehata, M.S., & Razek, S.M.A. (2011). Experimental investigation of diesel engine performance and emission characteristics using jojoba/diesel blend and sunflower oil. Fuel, 90(2), 886–897. https://doi.org/10.1016/j.fuel.2010.09.011
- D’Amico, M., Zampilli, M., Laranci, P., D’Alessandro, B., Bidini, G., & Fantozzi, F. (2015). Measuring injectors fouling in internal combustion engines through imaging. In Energy Procedia, 82, 9–16. Elsevier Ltd. https://doi.org/10.1016/j.egypro.2015.11.873.
- Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Fazal, M.A., Khan, A.F., Fayaz, H., & Varman, M. (2013). Impact of palm biodiesel blend on injector deposit formation. Applied Energy, 111, 882–893. https://doi.org/10.1016/j.apenergy.2013.06.036
- Liaquat, A.M., Masjuki, H.H., Kalam, M.A., & Rizwanul Fattah, I.M. (2014). Impact of biodiesel blend on injector deposit formation. Energy, 72, 813–823. https://doi.org/10.1016/j.energy.2014.06.006
- Reddy, S.M., Sharma, N., Gupta, N., & Agarwal, A. K. (2018). Effect of non-edible oil and its biodiesel on wear of fuel injection equipment components of a genset engine. Fuel, 222, 841–851. https://doi.org/10.1016/j.fuel.2018.02.132
- Shameer, M.P., Ramesh, K. (2017). Influence of antioxidants on fuel stability of Calophylluminophyllum biodiesel and RSM-based optimization of engine characteristics at varying injection timing and compression ratio. The Brazilian Society of Mechanical Sciences and Engineering, 39, 4251-4273. DOI 10.1007/s40430-017-0884-8.
- Harrison, B:Oxidative Stability And Ignition Quality Of Algae Derived Methyl Esters Containing Varying Levels Of Methyl Eicosapentaenoate And Methyl Docosahexaenoate, ‘Colorado State University’, 2011, (MS Thesis).
- I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam & B.M. Masum (2014). Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel. Materials Research Innovations, 18, Sup6, S6-90-S6-94. DOI: 10.1179 /1432891714Z.000000000936
- Kumar, N. (2017, February 15). Oxidative stability of biodiesel: Causes, effects and prevention. Fuel. Elsevier Ltd. https://doi.org/10.1016/j.fuel.2016.11.001
- Ramalingam, S., Govindasamy, M., Ezhumalai, M., & Kaliyaperumal, A. (2016). Effect of leaf extract from Pongamia pinnata on the oxidation stability, performance and emission characteristics of calophyllum biodiesel. Fuel, 180, 263–269. https://doi.org/10.1016/j.fuel.2016.04.046
- Pullen, J., & Saeed, K. (2012, October). An overview of biodiesel oxidation stability. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2012.06.024
- A Brief Review on Determination of Viscous, Coulomb and Particle Damping Content from the Responses of a Single Degree of Freedom System Harmonically Forced Linear Oscillator
Abstract Views :304 |
PDF Views:0
Authors
Affiliations
1 Mechanical Engineering Department, Sandip University, Nashik, Maharashtra, IN
1 Mechanical Engineering Department, Sandip University, Nashik, Maharashtra, IN
Source
Manufacturing Technology Today, Vol 19, No 7-8 (2020), Pagination: 12-19Abstract
Mechanical vibration systems with viscous, Coulomb friction and particle damping are of importance in the applications of dynamics and control problems. When a vibrating system is damped with more than one type of models of damping, it is necessary to determine which of these types of damping are more effective to control the resonant response. In such case, it is important to identify damping parameters from the responses of a vibrating system. The problem of identification of content of each type damping in a given system is a major research area. A brief review of some of research papers in the above mentioned area are focused here. Some of techniques which are used to quantify the level of damping in a system are Logarithmic Decrement Method, Hysteresis Loop Method, and Half Power Band-Width Method suggested by most of authors.Keywords
Viscous, Coulomb, Particle Damping, Forced Vibration, Excitation.References
- Liang, J.W., & Feeny, B.F. (2004). Identifying Coulomb and viscous friction in forced dualdamped oscillators. Journal of Vibration and Acoustics, Transactions of the ASME, 126(1), 118–125. https://doi.org/10.1115/1.1640356
- Olson S.E., (2003). Analytical particle damping model. Journal Sound Vibration. 264(5), 1155–1166.
- Duncan, M.R., Wassgren, C.R., & Krousgrill, C.M. (2005). Damping performance of a single particle impact damper. Journal of Sound and Vibration, 286(1–2), 123–144. https://doi.org/10.1016/j.jsv.2004.09.028
- Mao, K., Wang, M.Y., Xu, Z.Z., & Chen, T. (2004). Simulation and characterization of particle damping in transient vibrations. Journal of Vibration and Acoustics, Transactions of the ASME, 126(2), 202–211. https://doi.org/10.1115/1.1687401
- Hartog, D.J.P. (1931). Forced Vibrations with Combined Coulomb and Viscous Friction. Transaction American Society of Mechanical Engineers, 53, 107–115.
- Hundal, M.S. (1979). Response of a base excited system with Coulomb and viscous friction. Journal of Sound and Vibration, 64(3), 371–378.https://doi.org/10.1016/0022460X(79)90583-2
- Levitan, E.S. (1960). Forced Oscillation of a Spring‐Mass System having Combined Coulomb and Viscous Damping. Journal of the Acoustical Society of America, 32(10), 1265– 1269. https://doi.org/10.1121/1.1907893
- Perls, T.A., & Sherrard, E.S. (1956). Frequency response of second-order systems with combined coulomb and viscous damping. Journal of Research of the National Bureau of Standards, 57(1), 45-64. https://doi.org/10.6028/jres.057.007
- Ferri, A.A., & Dowell, E.H. (1988). Frequency domain solutions to multi-degree-of-freedom, dry friction damped systems. Journal of Sound and Vibration, 124(2), 207–224. https://doi.org/10.1016/S0022-460X(88)80183-4
- Tomlinson, G.R., & Hibbert, J.H. (1979).Identification of the dynamic characteristics of a structure with coulomb friction. Journal of Sound and Vibration, 64(2), 233–242. https://doi.org/10.1016/0022-460X(79)90648-5
- Tomlinson, G.R., (1980). Analysis of the Distortion Effects of Coulomb Damping on the Vector Plots of Lightly Damped System. Journal Sound Vibration, 71(3), 443–451. https://doi.org/10.1016/0022-460X(80)90426-5
- Chen, Q., & Tomlinson, G.R. (1996). Parametric identification of systems witli dry friction and nonlinear stiffness using a time series model. Journal of Vibration and Acoustics, Transactions of the ASME, 118(2), 252–263. https://doi.org/10.1115/1.2889656
- Yurtchenko, D.V., & Dimentberg, M.F. (2002). In-service Identification of Nonlinear Damping from Measured Random Vibration, Journal Sound Vibration, 255(3), 549–554. DOI: 10.1006/jsvi.2001.4179
- Etsuo, M., & Shinobu, K. (1984). Forced Vibration of a Base-Excited SDOF System with Coulomb Friction. American Society of Mechanical Engineers Journal Vibration Acoustics, 106, 280–285.
- Yao, G.Z., Meng, G., & Fang, T. (1997). Parameter Estimation and Damping Performance of Electro-Rheological Dampers. Journal Sound Vibration, 204(4), 575–584. https://doi.org/10.1006/jsvi.1997.0959
- Gong, C., & Zu Jean W. (2002). Two-Frequency Oscillation with Combined Coulomb and Viscous Frictions. American Society of Mechanical Engineers Journal Vibration Acoustics, 124, 537–544.
- Friend R.D., & Kinra V. K., (2000). Particle Impact Damping. Journal Sound Vibration, 233(1), 93-118. https://doi.org/10.1006/jsvi.1999.2795
- Kuanmin, M., Wang, M.Y., Xu, Z & Chen, T. (2004). Simulation and Characterization of Particle Damping in Transient Vibrations. American Society of Mechanical Engineers Journal Vibration Acoustics, 126(2), 202 –211. https://doi.org/10.1115/1.1687401
- Jacobsen, L.S., & Ayre, R.S. (1958). Engineering Vibrations, McGraw Hill Publishing Company Ltd. New York.
- Dimentberg, M.F. (1968). Determination of Nonlinear Damping Function from Forced Vibration Test of a SDOF System. Mechanical Tverdogo Tela, 2, 32–34 (in Russian).
- Stanway, R., Sproston J.L., & Stevens, N.G. (1985). Note on Parameter Estimation in Nonlinear Vibrating Systems. Proceedings Institute Mechanical Engineering, Part C: Mechanical Engineering Sciences, 199(C1), 79–84.
- Liang L.W., & Feeny B.F. (1999). Estimation of Viscous and Coulomb Damping in Harmonically Excited Oscillators. Proceedings DETC 99, Las Vegas, Nevada, 1-8.