Indian Journal of Fibre & Textile Research

Open Access Open Access  Restricted Access Subscription Access

Sound Absorption Characteristics of Nanofibre Web Coated Foams


Affiliations
1 Department of Materials Science and Nanotechnology Engineering, Faculty of Engineering, Turkey
2 Department of Textile Engineering, Graduate Education Institute, Turkey
3 Department of Occupational Health and Safety, Faculty of Health Sciences, Usak University, Usak, Turkey
 

Sound absorption properties of polyamide 6 (PA6) nanofibre webs and a widely used sound absorption foam coated with nanofibre webs have been investigated. Initial studies have focused on the electrospinning by using PA6 polymer to obtain uniform and bead-free nanofibres. Thereafter, nanofibres are electrospun on an absorption foam through two spinning durations of 10 h and 20 h. Thicknesses, mass per unit area values, porosities, pore sizes, and Brunauer-Emmet-Teller surface areas of the webs are determined. At characterization stage, sound absorption coefficients of pure nanofibre webs, pure foam, and foams enhanced with nanofibre webs are measured by acoustic impedance tube method. Noise reduction coefficients (NRC) are also calculated. Sound absorption coefficients at 6400 Hz are observed as 0.76 and 0.74 for nanofibre webs electrospun during 10 h and 20 h respectively. The NRC values are found as 0.189, 0.197 and 0.192 for pure foam sample and nanofibre webs electrospun during 10 h and 20 h respectively. Overall results of the study indicate that moderate mid-high frequency sound absorption and noise reduction coefficients are obtained by using the nanofibre web coated foams.

Keywords

Electrospinning, Nanofibres, Noise Reduction Coefficient, Polyamide 6, Sound Absorption, Sound Absorption Coefficient.
User
Notifications
Font Size

  • Talukdar M K, Indian J Fibre Text Res, 26 (2001) 44.

  • van Kempen E, Fischer P, Janssen N, Houthuijs D, van Kamp I, Stansfeld S & Cassee F, Environ Res, 115 (2012) 18.

  • Arenas J P & Crocker M J, Sound Vib, 44 (2010) 12. 4 Konopka W, Pawlaczyk-Luszcznska M & Sliwinska- Kowalska M, Med Pr, 65 (2014) 583.

  • Cox T & D’antonio P, Acoustic Absorbers and Diffusers: Theory, Design and Application (Boca Raton: Taylor & Francis), 2016, 575.

  • Jacobsen F, Poulsen T, Rindel J H, Gade A C & Ohlrich M, Fundamentals of Acoustics and Noise Control (Technical University of Denmark), 2011, 172.

  • Zainulabidin M, Rani M A, Nezere N & Tobi A L M, Int J Mech & Mechatron Eng, 14 (2014) 118.

  • Seddeq H S, Aust J Basic Appl Sci, 3 (2009) 4610.

  • Lee Y Joo C, Autex Res J, 3 (2003) 78.

  • Kucukali-Ozturk M, Nergis B & Candan C, J Ind Text, 47 (2018) 1739.

  • Bihola D V, Amin H N & Shah V D, Int J Eng Sci Futur Tech, 1 (2015) 1.

  • Gao B, Zuo L & Zuo B, Fiber Polym, 17 (2016) 1090.

  • Xiang H F, Tan S X, Yu X L, Long Y H, Zhang X L, Zhao N & Xu J, Chin J Polym Sci, 29 (2011) 650.

  • Koizumi T, Tsujiuchi N & Adachi A, High Performance Structures and Composites (WIT Press, Southampton), 2002, 157.

  • Carpinello S, L'Hermite P, Bérengier M & Licitra G, Radiat Prot Dosim, 111 (2004) 363.

  • Takahashi Y, Otsuru T & Tomiku R, Appl Acoust, 66 (2005) 845.

  • Cao L, Si Y, Wu Y, Wang X, Yu J & Ding B, Nanoscale, 11(5) (2019) 2289.

  • Bahrambeygi H, Sabetzadeh N, Rabbi A, Nasouri K, Shoushtari A M & Babaei M R, J Polym Res, 20 (2013) 1.

  • Khan W S, Asmatulu R & Yildirim M B, J Aerospace Eng, 25 (2012) 376.

  • Na Y, Agnhage T & Cho G, Fiber Polym, 13 (2012) 1348.

  • Rabbi A, Bahrambeygi H, Shoushtari A M & Nasouri K, J Eng Fiber Fabic, 8 (2013) 36.

  • Trematerra A, Iannace G, Nesti S, Fatarella E & Peruzzi F, International Conference, 7th Forum Acusticum, (Krakow), 7-12 September 2014.

  • Kucukali-Ozturk M, Ozden-Yenigun E, Nergis B & Candan C, J Ind Text, 46 (2017) 1498.

  • Storck JL, Grothe T, Mamun A, Sabantina L, Klöcker M, Blachowicz T & Ehrmann A, Mater, 13 (1) (2020) 47.

  • Dogan G, Başal G, Bayraktar O, Ozyildiz F, Uzel A & Erdogan I, Microsc Res Tech, 79 (2016) 38.

  • Shahani F, Soltani P & Zarrebini M, J Eng Fiber Fabr, 9 (2014) 84.

  • Zhao S, Li Y, Wang Y, Ma Z & Huang X, Fuel, 244 (2019) 78.

  • Yudar H H, Pat S, Korkmaz S, Ozen S & Senay V, J Mater Sci: Mater Electron, 28 (2017) 14499.

  • Kumar B R & Rao T S, Dig J Nanomater Bios, 7 (2012) 1881.

  • Jung W H, Kwak N-S, Hwang T S & Yi K, Appl Surf Sci, 261 (2012) 343.

  • Lee S & Obendorf SK, Text Res J, 77(9) (2007) 696.

  • Thilagavathi N, Muthukumar S, Krishnanan N & Senthilram T, J Nat Fibers, 17(10) (2020) 1391.

  • Chiu H T, Lin J M, Cheng T H & Chou S Y, Express Polym Lett, 5 (2011) 308.

  • Gu B K, Park S J, Kim M S, Kang C M, Kim J & Kim C H, Carbohyd Polym, 97 (2013) 65.

  • Min B-M, Lee G, Kim S H, Lee T S & Park W H, Biomaterials, 25 (2004) 1289.

  • Baltieri R C, Innocentini-Mei L H, Tamashiro W, Peres L & Bittencourt E, Eur Polym J, 38 (2002) 57.

  • Rabbi A, Bahrambeygi H, Nasouri K, Shoushtari A M & Babaei M R, Adv Polym Technol, 33 (2014) 8. 38 Kalinova K, Ozturk M K & Komarek M, J Text Inst, 107 (2016) 1068.

  • Mohrova J & Kalinova K, J Nanomater, 2 (2012) 4.

  • Kalinova K, J Nanomater, 1 (2011) 6.

  • Ura D P, Karbowniczek J E, Szewczyk P K, Metwally S, Kopyscianski M & Stachewicz U, Bioeng, 6 (2019) 12.

  • Sung G, Kim J S & Kim J H, Polym Adv Technol, 29 (2018) 852.


Abstract Views: 91

PDF Views: 73




  • Sound Absorption Characteristics of Nanofibre Web Coated Foams

Abstract Views: 91  |  PDF Views: 73

Authors

Gamze D. Tetik
Department of Materials Science and Nanotechnology Engineering, Faculty of Engineering, Turkey
Fulya Yilmaz
Department of Textile Engineering, Graduate Education Institute, Turkey
Gizem Celep
Department of Occupational Health and Safety, Faculty of Health Sciences, Usak University, Usak, Turkey

Abstract


Sound absorption properties of polyamide 6 (PA6) nanofibre webs and a widely used sound absorption foam coated with nanofibre webs have been investigated. Initial studies have focused on the electrospinning by using PA6 polymer to obtain uniform and bead-free nanofibres. Thereafter, nanofibres are electrospun on an absorption foam through two spinning durations of 10 h and 20 h. Thicknesses, mass per unit area values, porosities, pore sizes, and Brunauer-Emmet-Teller surface areas of the webs are determined. At characterization stage, sound absorption coefficients of pure nanofibre webs, pure foam, and foams enhanced with nanofibre webs are measured by acoustic impedance tube method. Noise reduction coefficients (NRC) are also calculated. Sound absorption coefficients at 6400 Hz are observed as 0.76 and 0.74 for nanofibre webs electrospun during 10 h and 20 h respectively. The NRC values are found as 0.189, 0.197 and 0.192 for pure foam sample and nanofibre webs electrospun during 10 h and 20 h respectively. Overall results of the study indicate that moderate mid-high frequency sound absorption and noise reduction coefficients are obtained by using the nanofibre web coated foams.

Keywords


Electrospinning, Nanofibres, Noise Reduction Coefficient, Polyamide 6, Sound Absorption, Sound Absorption Coefficient.

References