Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Effect of Reaction Temperature on Structural and Optical Properties of CuS Nanoparticles


Affiliations
1 Department of Physics, National Institute of Technology Kurukshetra, 136 119, India
 

The present study exploits the hydrothermal method to synthesize Covellite CuS nanoparticles. To optimize the synthesized nanoparticles for their application in Blue Light Emitting Diode (BLEDs), the effect of reaction temperature on their structural and optical properties was studied at 100°C, 125 °C, and 150 °C for 12h. The diffraction and morphological studies were conducted using X-Ray Diffraction and Scanning Electron Microscopy analysis, respectively. The particle size increases with the increase in reaction temperature, and the structural parameters match well with the covellite CuS hexagonal phase prepared at 125 °C. Ultraviolet-visible absorption studies reveal that the bandgap of nanoparticles was found in the range of 2.9-3.1 eV. The Photoluminescence spectroscopy and CIE chromaticity plot show that the sample synthesized at 125 °C has a low recombination rate and emits light in the blue region, suggesting that it can be utilized in devices like BLEDs and lamps.

Keywords

Hydrothermal, Metal Chalcogenides, Covellite Copper Sulphide, Photoluminescence, LEDs.
User
Notifications
Font Size

  • Rani N, & Jaggi N, , 43 (2020) 1.

  • Khurana K, & Jaggi N, J Mater Sci Mater Electron, 31 (2020) 10334.

  • Sharma S, Kumar K, Thakur N, Chauhan S, & Chauhan M S, Bull Mater Sci, 43 (2020) 1.

  • Kaur A, Kaur B, Singh K, Kumar R, & Chand S, Bull Mater Sci, 44 (2021) 268.

  • Munyai S, Mahlaule G L M, & Hintsho M N C, Mater Res Express, 9 (2022) 197.

  • Gupta A, Dhakate S R, Gurunathan P, & Ramesha K, Appl Nanosci, 7 (2017) 449.

  • Lindroos S, & Leskelä M, Int J Inorg Mater, 2 (2000) 197.

  • Lenggoro IW, Kang YC, Komiya T, Okuyama K, & Tohge N, & Japanese J Appl Physics, 37 (1998) 288.

  • Radhakrishnan S, Kim H, & Kim B, Sensors Actuators B Chem, 233 (2016) 93.

  • Hu XS, Shen Y, Xu LH, Wang LM, & Xing YJ, J Alloys Compd, 674 (2016) 289.

  • Wang Z, Rafai S, Qiao C, Jia J, Zhu Y, Ma X, & Cao C, ACS Appl Mater Interfaces,11 (2019) 7046.

  • Zeinodin R, & Jamali-Sheini F, Phys B Condens Matter 570 (2019) 148.

  • Balakrishnan A, Groeneveld J D, Pokhrel S, & Mädler L, Chem - A Eur J, 27 (2021) 6390.

  • Mu C F, Yao Q Z, Qu X F, Zhou G T, Li M L, & Fu S Q, Colloids Surfaces A Physicochem Eng Asp, 371 (2010) 14.

  • Riyaz S, Parveen A, & Azam A, Perspect Sci, 8 (2016) 632.

  • Yadav S, & Bajpai P K, Soft Nanosci Lett, 8 (2018) 9.

  • Gao L, Wang E, Lian S, Kang Z, Lan Y, & Wu D, Solid State Commun, 130 (2004) 309.

  • Sabeeh H, Aadil M, Zulfiqar S, Aadil M, Zulfiqar S, Rasheed A, Al K N F, Philips A O, Haider S, Warsi M F, & Shakir I, Ceram Int, 47 (2021) 13613.

  • Xu H, Wang W, & Zhu W, Mater Lett, 60 (2006) 2203. 20 Yadav S, Shrivas K, & Bajpai P K J Alloys Compd,772 (2019) 579.

  • Zhong R, Peng C, Chen L, Yu N, Liu Z, ZHu M, He C, & Chen Z, RSC Adv, 6 (2016) 40480. 22 Deb S, & Kalita P K, J Mater Sci Mater Electron,32 (2021)

  • Saranya M, Ramachandran R, Samuel E J J, Jeong S K, & Grace A N, Powder Technol, 279 (2015) 209.

  • Bakr M, & Abdel K MH, Mater Chem Phys, 241(2020) 122285.

  • Ajibade PA, J Nanotechnol, 2019 (2019) 11.

  • Seoudi RÃ, Shabaka A, Eisa WH, Anies B, & Farage NM,Phys B Phys Condens Matter, 405(2010) 919.

  • Goswami M, Adhikary NC, & Bhattacharjee S, Opt - Int J Light Electron Opt, 158 (2018) 1006.

  • Priya M, Geetha S, Ramamurthi A, J Mater Sci Mater Electron, 29(2018) 658.

  • Abbas S, Basma H, Bhoukhari JA, & Awad R, Appl. Phys. A, 127 (2021)505.

  • Sadiq I, Khan I, Rebrov E V, Ashiq MN, Naseem S, & Rana MU, J Alloys Compd, 570(2013) 7.

  • Tauc J, & Menth A, J Non Cryst Solids, 8(1972) 569.

  • Chaki SH, Tailor JP, & Deshpande M Adv Sci Lett, 20 (2014) 959.

  • Gupta A, Khosla N, Amit VG, & Annapurna SK, Appl Nanosci, 10 (2020) 4191.

  • GangwarAK, Gupta A, Kedawat G, Kumar P, Singh BP, Singh N,Srivastava AK, Dhakate SR & Gupta BK, Eur J Chem, 24(2018)9477.


Abstract Views: 28

PDF Views: 23




  • Effect of Reaction Temperature on Structural and Optical Properties of CuS Nanoparticles

Abstract Views: 28  |  PDF Views: 23

Authors

Yukti
Department of Physics, National Institute of Technology Kurukshetra, 136 119, India
Neena Jaggi
Department of Physics, National Institute of Technology Kurukshetra, 136 119, India

Abstract


The present study exploits the hydrothermal method to synthesize Covellite CuS nanoparticles. To optimize the synthesized nanoparticles for their application in Blue Light Emitting Diode (BLEDs), the effect of reaction temperature on their structural and optical properties was studied at 100°C, 125 °C, and 150 °C for 12h. The diffraction and morphological studies were conducted using X-Ray Diffraction and Scanning Electron Microscopy analysis, respectively. The particle size increases with the increase in reaction temperature, and the structural parameters match well with the covellite CuS hexagonal phase prepared at 125 °C. Ultraviolet-visible absorption studies reveal that the bandgap of nanoparticles was found in the range of 2.9-3.1 eV. The Photoluminescence spectroscopy and CIE chromaticity plot show that the sample synthesized at 125 °C has a low recombination rate and emits light in the blue region, suggesting that it can be utilized in devices like BLEDs and lamps.

Keywords


Hydrothermal, Metal Chalcogenides, Covellite Copper Sulphide, Photoluminescence, LEDs.

References