Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Characterization of finished surface through thermal additive centrifugal abrasive flow machining for better surface integrity


Affiliations
1 Mechanical Department, Delhi Technological University, Delhi 110 042, India
2 Department of Production and Industrial Engineering, Punjab Engineering College, Chandigarh 160 012, India

Abrasive Flow Machining (AFM) process has been a useful technique for deburring and polishing of the surface and edges through the abrasive laden media. The surface material has been removed in form of micro chips due to abrasion action of sharp cutting edges abrasive particles. A large amount of force and energy has been lost due to frictional forces between the surface and abrasive particles in AFM process. A new hybrid form of AFM process named as thermal additive centrifugal abrasive flow machining (TACAFM) has been discussed in the present investigation, which utilized the spark energy to melt the surface material. A lesser amount of force has been required by the abrasive particles to remove the molten material from the surface and also minimized the energy loss. In the present investigation central composite design response surface methodology has been used to plan and conduct the experiments using Design Expert® 11 software. Experiments have been performed to analyze the effect of input process variables such as current intensity, duty cycle, abrasive concentration, rotational speed of the electrode and extrusion pressure on scatter of surface roughness, micro hardness and % improvement in Ra of the workpiece. Also the finished surface of the brass work piece has been characterized for the microstructure study using SEM and XRD analysis. From the experimental results it has been found that duty cycle has the most significant effect towards Scatter of surface roughness with a contribution of 17.5 % while current has been contributed largest as 85.17 % towards micro hardness. Also it has been observed that current has contributed largest as 21.88% against the % improvement in Ra. The optimum scatter of surface roughness, micro hardness and % improvement in Ra has been observed as 0.15 μm, 345.95 HV and 39.52 % respectively.
User
Notifications
Font Size

Abstract Views: 86




  • Characterization of finished surface through thermal additive centrifugal abrasive flow machining for better surface integrity

Abstract Views: 86  | 

Authors

Parvesh Ali
Mechanical Department, Delhi Technological University, Delhi 110 042, India
R S Walia
Department of Production and Industrial Engineering, Punjab Engineering College, Chandigarh 160 012, India
Qasim Murtaza
Mechanical Department, Delhi Technological University, Delhi 110 042, India
Ranganath Muttanna Singari
Mechanical Department, Delhi Technological University, Delhi 110 042, India

Abstract


Abrasive Flow Machining (AFM) process has been a useful technique for deburring and polishing of the surface and edges through the abrasive laden media. The surface material has been removed in form of micro chips due to abrasion action of sharp cutting edges abrasive particles. A large amount of force and energy has been lost due to frictional forces between the surface and abrasive particles in AFM process. A new hybrid form of AFM process named as thermal additive centrifugal abrasive flow machining (TACAFM) has been discussed in the present investigation, which utilized the spark energy to melt the surface material. A lesser amount of force has been required by the abrasive particles to remove the molten material from the surface and also minimized the energy loss. In the present investigation central composite design response surface methodology has been used to plan and conduct the experiments using Design Expert® 11 software. Experiments have been performed to analyze the effect of input process variables such as current intensity, duty cycle, abrasive concentration, rotational speed of the electrode and extrusion pressure on scatter of surface roughness, micro hardness and % improvement in Ra of the workpiece. Also the finished surface of the brass work piece has been characterized for the microstructure study using SEM and XRD analysis. From the experimental results it has been found that duty cycle has the most significant effect towards Scatter of surface roughness with a contribution of 17.5 % while current has been contributed largest as 85.17 % towards micro hardness. Also it has been observed that current has contributed largest as 21.88% against the % improvement in Ra. The optimum scatter of surface roughness, micro hardness and % improvement in Ra has been observed as 0.15 μm, 345.95 HV and 39.52 % respectively.