Abstract Views :190 |
PDF Views:0
Authors
Affiliations
1 Indian Institute of Technology Bombay, Powai, Mumbai, IN
Source
Manufacturing Technology Today, Vol 19, No 10 (2020), Pagination: 44-48
Abstract
In the last two decades, machinability of glass workpiece using electrochemical discharge machining (ECDM) has been widely explored. Microfeatures such as microchannels and microholes in glass workpiece find application in devices pertaining to biomedical and microfluidic fields. The present work reports the fabrication of array microchannels in the glass workpiece using the ECDM process. A multi-pass milling technique was used to create deep channels using stainless steel array tool electrodes and circular ring as anode. Experiments were performed using a pulsed DC power supply and KOH electrolyte (30 % wt.). Effect of the pass numbers i.e. the number of times the array tool electrodes was moved back and forth on the channel depth and width were analyzed. Up to seven passes were used to create straight microchannels and three passes to fabricate spiral-shaped microchannels in the glass workpiece. From the experimental results, it was observed that the microchannel depth and width showed an increasing trend with an increase in the pass number. Optical microscopic images depicted deep microchannels with smooth surfaces were fabricated using the ECDM process.
Keywords
Electrochemical Discharge Machining, Glass Micromachining, Array Microchannels, Multi-Pass.
