Refine your search
Collections
Journals
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Das, Arjita
- Fibre Bragg Grating Sensors for Measuring Spark Gap in Micro-EDM in Real-Time
Abstract Views :263 |
PDF Views:0
Authors
Affiliations
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bengaluru, IN
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bengaluru, IN
Source
Manufacturing Technology Today, Vol 18, No 7 (2019), Pagination: 3-8Abstract
In the phase of Industry 4.0 (I.4) technology, miniaturization has paved the foundation of the smart manufacturing sector and the micromachining processes can be considered as the front end of the I.4 technologies. Micro-Electric Discharge Machining (Micro-EDM) has been considered the most promising micromachining technology for fabrication of microfeatures irrespective to hard and temperature resistive materials. The process characteristics in Micro-EDM is very stochastic in nature, and understanding the proper process characteristics with digitization of data to predict the process for improved capabilities is highly required in this era of Industry 4.0 revolution. The spark discharge between the anode and cathode is envisaged to be very small gap (~10μm) and also an essential parameter for machining performance, but measurement of spark gap of Micro-EDM in realtime is a great challenge. This present work is based on measurement of spark gap with a novel sensing technique based on Fiber Bragg Grating (FBG).Keywords
Micro-EDM, Spark Gap Measurement, FBG Sensor.References
- Katz, Z and Tibbles, CJ: Analysis of micro-scale EDM process, 'Int. J. Adv. Manuf. Technol'., vol. 25, no. 9-10, 2005, 923-928.
- Rajurkar, KP; Yu, ZY: 3D micro-EDM using CAD/ CAM, 'CIRP Ann. - Manuf. Technol.', vol. 49, no. 1, 2000, 127-130, .
- Yu, ZY; Masuzawa, T; Fujino, M: Micro-EDM for ThreeDimensional Cavities - Development of Uniform Wear Method-, 'CIRP Ann.', vol. 47, no. 1, 2007, 169-172, .
- Masuzawa, T: State of the Art of Micromachining, 'CIRP Ann.', vol. 49, no. 2, 2000, 473-488.
- Pham, DT; Dimov, SS; Bigot, S; Ivanov, A; Popov, K: Micro-EDM - Recent developments and research issues, 'J. Mater. Process. Technol.', vol. 149, no. 1-3, 2004, 50-57.
- Uriarte, L; et al., Comparison between microfabrication technologies for metal tooling, 'Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.', vol. 220, no. 11, 2006, 1665-1676.
- Hanumaiah, N; Mitra, S; Paul, G; Roy, S; Sarkar, S: Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media, 'Int. J. Adv. Manuf. Technol.', vol. 65, no. 5-8, 2012, 1009-1017, .
- Nagahanumaiah, J; Ramkumar, N; Glumac, S; G, Kapoor; Devor, RE: Characterization of plasma in micro-EDM discharge using optical spectroscopy, 'J. Manuf. Process.', vol. 11, no. 2, 2009, 82-87.
- Yeo, SH; Kurnia, W; Tan, PC: Electro-thermal modelling of anode and cathode in micro-EDM, 'J. Phys. D. Appl. Phys.', vol. 40, no. 8, 2007, 2513–2521.
- Jahan, MP; Ali Asad, ABM; Rahman, M; Wong, YS; Masaki, T: Micro-Electro Discharge Machining (μEDM), 'Micro-Manufacturing Des. Manuf. MicroProducts', 301–346, 2011.
- Davis, MA; Kersey, AD; Sirkis, J; Friebele, EJ: Shape and vibration mode sensing using a fiber optic Bragg grating array, 'Smart Mater. Struct.', vol. 5, no. 6, 1996, 59-765.
- Lee, B: Review of the present status of optical fiber sensors, 'Opt. Fiber Technol.', vol. 9, no. 2, 2003, 57-79.
- Tomas, R: Optical fibre sensory technology, Opt. Lasers Eng., vol. 23, no. 4, 2003, 260.
- Hill, KO; Fujii, Y; Johnson, DC; Kawasaki, BS: Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication, 'Appl. Phys. Lett.', vol. 32, no. 10, 1978, 647-649,
- Allwood, G; Wild, G; Lubansky, A; Hinckley, S: A highly sensitive fiber Bragg grating diaphragm pressure transducer, 'Opt. Fiber Technol.', vol. 25, 2015, 25-32.
- Pei, H; Teng, J; Yin, J; Chen, R: A review of previous studies on the applications of optical fiber sensors in geotechnical health monitoring, 'Measurement, vol. 58, 2014, 207-214.
- Ho, Yen-Te; Huang, An-Bin; Lee, Jui-Ting: Development of a fibre Bragg grating sensored ground movement monitoring, 'Meas. Sci. Technol.' vol. 17, 2006, 1733-1740.
- Zhao, Q; Zhang, Y, hua; Ji, Y, cheng; Huang, Z, an; Gao, Y, kun: Mechanism research and application on distributed optical fibre temperature measurement in coalmine goaf area based on the sensor network, 'Int. J. Sens. Networks', vol. 20, no. 2, 104, 2016.
- Chong, KP: Health Monitoring of Civil Structures, 'J. Intell. Mater. Syst. Struct.', vol. 33, no. 10, 928-940, 9AD.
- Ye, XW; Ni, YQ; Yin, JH: Safety Monitoring of Railway Tunnel Construction Using FBG Sensing Technology, 'Adv. Struct. Eng.', vol. 16, no. 8, 2013, 1401- 1409.
- Liang, M; Fang, X: Application of Fiber Bragg Grating Sensing Technology for Bolt Force Status Monitoring in Roadways, 'Appl. Sci.', vol. 8, no. 1, 2018, 107.
- 'Fiber Gratings : Basic Theory and Sensing Principle', book chapter -2, 20-79.
- Chen, J; Liu, B; Zhang, H: Review of fiber Bragg grating sensor technology, 'Front. Optoelectron. China', vol. 4, no. 2, 2011, 204-212.
- Mizunami, T; Gupta, S; Shimomura, T: KrF-laserinduced fiber Bragg gratings: Formation characteristics and cutback measurement, 'Japanese J. Appl. Physics, Part 1 Regul. Pap. Short Notes Rev. Pap.', vol. 35, no. 8, 1996, 4349- 4352, .
- Dong, X; Liu, Y; Liu, Z; Dong, X: Simultaneous displacement and temperature measurement with cantilever- based fiber Bragg grating sensor, 'Opt. Commun.', vol. 192, no. 3–6, 2001, 213–217
- Study on Material Removal Rate and Surface Roughness using Graphene as Dielectric Additives in Micro-Electric Discharge Machining
Abstract Views :101 |
PDF Views:0
Authors
Affiliations
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, IN
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, IN
2 Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, IN
Source
Manufacturing Technology Today, Vol 20, No 11-12 (2021), Pagination: 3-9Abstract
Micro-electric discharge machining is the most distinguished micro-manufacturing process for engineering micro-parts of different geometric features. The slow material removal rate owing to the low energy short-pulsed electric discharge is the major bottleneck of the process in batch scale production. This paper is an attempt to increase the material removal rate (MRR) and enhance the surface integrity in micro-EDM using graphene as an additive in dielectric liquid. Graphene sheets synthesized using Hummers method followed by reduction and subsequent heating was dispersed in hydrocarbon based dielectric liquid by ultrasonication at temperature near to the flash point. The INCONEL 718 workpiece electrode has been immersed in the graphene suspended dielectric medium where as tungsten carbide of diameter 200µm has been used as tool electrode. It has been found that the MRR increases by 47 % in terms of volume of material removed and the surface roughness reduces by 73 % for graphene additive based dielectric medium as compared with dielectric without additive.Keywords
Micro-EDM, MRR, Surface Roughness, Graphene, Dielectric Medium.References
- Behrens, A., & Ginzel, J. (2003). Neuro-fuzzy process control system for sinking EDM. Journal of Manufacturing Processes, 5(1), 33-39. https://doi.org/10.1016/S1526-6125(03)70038-3
- Chounde1, A. B., & Pawar, M. M. (2014). Study of Pulsed DC Power Supply Parameters for Micro-EDM. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engg., 3(10), 12493-12495.
- Gangadhar, A., Shunmugam, M. S., & Philip, P. K. (1992). Pulse train studies in EDM with controlled pulse relaxation. International Journal of Machine Tools and Manufacture, 32(5):651–657.
- Jahan, M. P., Anwar, M. M., Wong, Y. S., & Rahman, M. (2009). Nanofinishing of hard materials using micro-electrodischarge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(9). https://doi.org/10.1243/09544054JEM1470
- Jahan, M. P., Rahman, M., & Wong, Y. S. (2010). Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(11), 1725–1739. https://doi.org/10.1243/09544054JEM1878
- Kibria, G., Sarkar, B. R., Pradhan, B. B., & Bhattacharyya, B. (2010). Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. International Journal of Advanced Manufacturing Technology, 48(5), 557-570.
- Kolli, M., & Kumar, A. (2015). Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method. Engineering Science and Technology, an International Journal, 18(4), 524-535. https://doi.org/10.1016/j.jestch.2015.03.009
- Kurnia, W., Tan, P. C., Yeo, S. H., & Tan, Q. P. (2009). Surface roughness model for micro electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(3), 279-287. https://doi.org/10.1243/09544054JEM1188
- Mahendran. S., Devarajan. R., Nagarajan, T., & Majdi, A. (2010) - A Review of Micro-EDM. Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol II, IMECS 2010, March 17 - 19, 2010, Hong Kong
- Manikandan, R., & Venkatesan, R. (2012). Optimizing the machining parameters of micro EDM for Inconel 718. Journal of Applied Sciences, 12(10),971-977.
- Nagahanumaiah, Ramkumar, J., Glumac, N., Kapoor, S. G., & Devor, R. E. (2009). Characterization of plasma in micro-EDM discharge using optical spectroscopy. Journal of Manufacturing Processes, 11(2), 82-87. https://doi.org/10.1016/j.jmapro.2009.10.002
- Nguyen, M. D., Rahman, M., & Wong, Y. S. (2014). Development of a postprocessing approach for three-dimensional microelectrical discharge machining milling and application in simultaneous microelectrical discharge/ electrochemical milling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(1), 62-73. https://doi.org/10.1177/0954405413486462
- Paul, G., Roy, S., Sarkar, S., Hanumaiah, N., & Mitra, S. (2013). Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media. The International Journal of Advanced Manufacturing Technology, 65(5–8), 1009–1017. https://doi.org/10.1007/s00170-012-4235-8
- Pradhan, B. B., & Bhattacharyya, B. (2008). Improvement in microhole machining accuracy by polarity changing technique for microelectrode discharge machining on Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(2), 163-173. https://doi.org/10.1243/09544054JEM959
- Pradhan, B. B., & Bhattacharyya, B. (2009). Modelling of micro-electrodischarge machining during machining of titanium alloy Ti-6Al-4V using response surface methodology and artificial neural network algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(6), 683-693. https://doi.org/10.1243/09544054JEM1343
- Prakash, V., Kumar, P., Singh, P. K., Hussain, M., Das, A. K., & Chattopadhyaya, S. (2019). Micro-electrical discharge machining of difficult-to-machine materials: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(2), 339-370. https://doi.org/10.1177/0954405417718591
- Rajurkar K. P., & Yu Z. Y. (2000) 3D micro-EDM using CAD/CAM. CIRP Annals, 49(1), 127–130.
- Son, S. M., Lim, H. S., Kumar, A. S., & Rahman, M. (2007). Influences of pulsed power condition on the machining properties in micro EDM. Journal of Materials Processing Technology, 190(1–3), 73-76. https://doi.org/10.1016/j.jmatprotec.2007.03.108
- Talla, G., Gangopadhayay, S., & Biswas, C. K. (2017). State of the art in powder-mixed electric discharge machining: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(14), 2511-2526. https://doi.org/10.1177/0954405416634265
- Tan, P. C., & Yeo, S. H. (2011). Investigation of recast layers generated by a powder-mixed dielectric micro electrical discharge machining processg. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(7), 1051-1062. https://doi.org/10.1177/2041297510393645
- Unune, D. R., & Mali, H. S. (2015). Current status and applications of hybrid micromachining processes: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(10), 1681-1693. https://doi.org/10.1177/0954405414546141
- Venkanna. M., & Chakraborty, A. K. (2014). Synthesis and characterizations of graphene oxide and reduced graphene oxide nanosheets. AIP Conf Proc., 1591, 574–576. https://doi.org/10.1063/1.4872679
- Wang, X., Liu, Z., Xue, R., Tian, Z., & Huang, Y. (2014). Research on the influence of dielectric characteristics on the EDM of titanium alloy. The International Journal of Advanced Manufacturing Technology, 72(5), 979-987.
- Yeo, S. H., Aligiri, E., Tan, P. C., & Zarepour, H. (2009). A new pulse discriminating system for Micro-EDM. Materials and Manufacturing Processes, 24(12), 1297-1305 https://doi.org/10.1080/10426910903130164
- Yeo, S. H., Tan, P. C., & Kurnia, W. (2007). Effects of powder additives suspended in dielectric on crater characteristics for micro electrical discharge machining. Journal of Micromechanics and Microengineering, 17(11). https://doi.org/10.1088/0960-1317/17/11/N01
- Yu, Z. Y., Masuzawa, T., & Fujino, M. (1998). Micro-EDM for three-dimensional cavities - Development of uniform wear method. CIRP Annals - Manufacturing Technology, 47(1). 169-172.https://doi.org/10.1016/s0007-8506(07)62810-8