Refine your search
Collections
Journals
Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Karpagaraj, A.
- A Review on Arc Welding of Super Duplex Stainless Steel (SDSS) 2507
Abstract Views :322 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical Engineering, National Institute of Technology Patna, Bihar, IN
1 Department of Mechanical Engineering, National Institute of Technology Patna, Bihar, IN
Source
Manufacturing Technology Today, Vol 19, No 1-2 (2020), Pagination: 17-24Abstract
Super Duplex Stainless Steels (SDSS) are playing an important role in mechanical, marine, gas industries and power plant. Welding is an important joining process involved in the construction of industrial structures. Selection of the welding method is a difficult task because the imbalance of austenite / ferrite ratio results in solidification cracking, reduce corrosion resistance and reduced ductility. Arc welding process like GTAW, GMAW and PAW are available to join the SDSS economically. The primary objective of this paper is to compare various arc welding processes and its welding parameters (welding speed, welding current, welding voltage etc.) for the joints of a thin sheet of SDSS 2507. Effects of SDSS alloying elements (Cr, Mo, Ni and N) on intermetallic phases is also discussed. This study can help to find out the best arc welding process and their welding parameter on phase balance to join the SDSS 2507.Keywords
SDSS, Corrosion Resistance, Arc Welding, Thin Sheet.References
- Valiente Bermejo, M. A., Hurtig, K., Eyzop,D & Karlsson, L. (2019). A New Approach to the Study of Multi-Pass Welds–Microstructure and Properties of Welded 20-mm-Thick Super duplex Stainless Steel. Applied Sciences. 9(6), 1050.
- M. Mohammed Asif, Kulkarni Anup Shrikrishna, P.Sathiya & Sunkulp Goel.(2015). The impact of heat input on the strength, toughness, microhardness, microstructure and corrosion aspects of friction welded duplex stainless steel joints, Journal of Manufacturing Processes. 18, 92–106.
- Anand, Birendra Kumar Barik, K.Tamilmannan & P.Sathiya.(2015). Artificial neural network modeling studies to predict the friction welding process parameters of Incoloy 800H joints. Engineering Science and Technology: An International Journal, 18 394-407.
- Korra, N. N., Vasudevan, M., & Balasubramanian, K. R.(2015). Multi-objective optimization of activated tungsten inert gas welding of duplex stainless steel using response surface methodology. The International Journal of Advanced Manufacturing Technology, 77(1-4), 67-81.
- Hosseini, V. A., Hurtig, K., Eyzop, D., Östberg, A., Janiak, P., & Karlsson, L.(2019). Ferrite content measurement in super duplex stainless steel welds. Welding in the World. 63(2), 551-563.
- Korra, N. N., Balasubramanian, K., & Vasudevan, M..(2015). Optimization of activated tungsten inert gas welding of super duplex alloy 2507 based on experimental results. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 229(8), 1407–1417.
- KoleniČ, F., Kovac, L., & Drimal, D. (2011) Effect of laser welding conditions on the austenite/ ferrite ratio in duplex stainless steel 2507 welds. Welding in the World, 55(5-6), 19-25.
- Pradeep, G. M., Ganesh, S., Aswin, M. R., & Anand, V. (2019) A Review on Various Pipe Line Welding Processes in Oil and Gas Industry. Engineering Reports, 2(1), 1-6.
- Karpagaraj, A., Shanmugam, N. S., & Sankaranarayanasamy, K.(2019). Experimental investigations and numerical prediction on the effect of shielding area and post flow time in the GTAW of CP Ti sheets. The International Journal of Advanced Manufacturing Technology. 101(9-12), 2933-2945.
- Bermejo, M. V., Karlsson, L., Svensson, L. E., Hurtig, K., Rasmuson, H., Frodigh, M., & Bengtsson, P. (2015). Effect of shielding gas on welding performance and properties of duplex and super duplex stainless steel welds. Welding in the World, 59(2), 239-249.
- Korra, N. N., Vasudevan, M., & Balasubramanian, K. R. (2016). Optimization of A-TIG welding of duplex stainless-steel alloy 2205 based on response surface methodology and experimental validation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.230(4), 837-846.
- Kimapong, K., & Triwanapong, S. (2019). Effect of GMAW Shielding Gas on Tensile Strength of Dissimilar SS400 Carbon Steel and SUS304 Stainless Steel Butt Joint. In Materials Science Forum, 950, 70-74. Trans Tech Publications.
- Wang, F., Hou, W. K., Hu, S. J., KannateyAsibu, E., Schultz, W. W., & Wang, P. C. (2003). Modeling and analysis of metal transfer in gas metal arc welding. Journal of Physics D: Applied Physics, 36(9), 1143.
- Stützer, J., Totzauer, T., Wittig, B., Zinke, M., & Jüttner, S.(2019). GMAW Cold Wire Technology for Adjusting the Ferrite–Austenite Ratio of Wire and Arc Additive Manufactured Duplex Stainless Steel Components. Metals, 9(5), 564.
- Taban, E.(2008). Toughness and microstructural analysis of superduplex stainless steel joined by plasma arc welding. Journal of materials science.43(12), 4309-4315.
- Migiakis, K., & Papadimitriou, G. D. (2009). Effect of nitrogen and nickel on the microstructure and mechanical properties of plasma welded UNS S32760 super-duplex stainless steels. Journal of materials science,. 44(23), 6372-6383.
- Taban, E., & Kaluc, E. Welding (2011). Behaviour of duplex and superduplex stainless steels using laser and plasma arc welding processes. Welding in the World. 55(7-8), 48-57.
- Taban, E.(2008). Joining of duplex stainless steel by plasma arc, TIG, and plasma Arc+ TIG welding processes. Materials and Manufacturing Processes,. 23(8), 871-878.
- Hoefer, K., Nitsche, A., Abstoss, K. G., Ertugrul, G., Haelsig, A., & Mayr, P. (2019). MultiMaterial additive manufacturing by 3D plasma metal deposition for graded structures of super duplex alloy 1.4410 and the austenitic corrosion resistant alloy 1.4404. JOM, .71(4), 1554-1559.
- Srinivas, K., Vundavilli, P. R., & Hussain, M. M. (2019). Non-linear modeling of mechanical properties of plasma arc welded Inconel 617 plates. Materials Testing. 61(8), 770-778.
- Hariharan, S. J., Vigneshwar, M., Selvamani, S. T., Shanmugam, K., & Palanikumar, K. (2019). Optimizing the Plasma Arc Welding Process Parameters to Attain the Minimum Corrosion Rate in the AISI 409M grade Ferritic Stainless Steel Autogenous Joints. Materials Today: Proceedings. 16, 1259-1270.
- Hosseini, V. A., Wessman, S., Hurtig, K., & Karlsson, L. (2016). Nitrogen loss and effects on microstructure in multipass TIG welding of a super duplex stainless steel. Materials & Design. 98, 88-97.
- Verma, J., & Taiwade, R. V.(2017). Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments—A review. Journal of Manufacturing Processes. 25, 134-152.
- García-García D.M., García-Antón J., IgualMu¬ñoz A., & Blasco-Tamarit E.(2006). Effect of cavitation on the corrosion behaviour of welded and non-welded duplex stainless steel in aqueous LiBr solutions. Corrosion Science. 48, 2380–2405.
- Yang, Y., Wang, Z., Tan, H., Hong, J., Jiang, Y., Jiang, L., & Li, J. (2012). Effect of a brief postweld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel. Corrosion Science, 65, 472–480. https://doi.org/10.1016/j.corsci.2012.08.054
- Pekkarinen J., & Kujanpää V. (2010) .The effects of laser welding parameters on the microstructure of ferritic and duplex stainless steels welds. Physics Procedia. 5, 517–523.
- Migiakis K., & Papadimitriou G.D.(2009). Effect of nitrogen and nickel on the microstructure and mechanical properties of plasma welded UNS S32760 super-duplex stainless steels. Journa of Materials Science. 44, 6372–6383.
- Pettersson C., & Sven-ÅkeFager. (1994). Welding practice for the Sandvik duplex stainless steels SAF 2304, SAF 2205 and SAF 2507. Sandvik Steel; S-881, 1–14.
- Tavara S.A., Chapetti M.D., Otegui J.L., & Manfredi C. (2001). Influence of nickel on the susceptibility to corrosion fatigue of duplex stainless steel welds. International Journal of Fatigue. 23, 619–626.
- Paulraj, P., & Garg, R. (2015). Effect of intermetallic phases on corrosion behavior and mechanical properties of duplex stainless steel and super-duplex stainless steel. Advances in Science and Technology Research Journal, 9(27).
- Liou H., Pan Y., Hsieh R., & Tsai W. (2001). Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels. Journal of Materials Engineering & Performances. 10(2), 231–241.
- Gunn R., (Ed.) (1997). Duplex stainless steels: microstructure, properties and applications. Elsevier.
- Deng B., Wang Z., Jiang Y., Sun T., Xu J., & Li J.(2009). Effect of thermal cycles on the corrosion and mechanical properties of UNS S31803 duplex stainless steel. Corrosion Science. 51, 2969–2975.
- Sathiya P., Aravindan S., Soundararajan R., & NoorulHaq, A. (2008). Effect of shielding gases on mechanical and metallurgical properties of duplex stainless-steel welds. Journal of Material Science. 44, 114–121.
- Hanninen H., Romu J., Ilola R., Tervo J., & Laitinen A.(2001). Effects of processing and manufacturing of high nitrogen-containing stainless steels on their mechanical , corrosion and wear properties. Journal of Materials Processing Technology. 117, 424–430.
- Lothongkum G., Wongpanya P., Morito S., Furuhara T., & Maki T.(2006). Effect of nitrogen on corrosion behavior of 28Cr–7Ni duplex and microduplex stainless steels in air-saturated 3.5 wt% NaCl solution. Corrosion Science. 48, 137–153.
- Huang C.S., & Shih C.C.(2005). Effects of nitrogen and high temperature aging on σ phase precipitation of duplex stainless steel. Materials Science and Engineering: A. 402, 66–75.
- Zucato I., Moreira M.C., Machado I.F., & Giampietri S. M. (2002). Microstructural characterization and the effect of phase transformations on toughness of the UNS S31803 duplex stainless steel aged treated at 850 °C. Materials Research. 5,385–389.
- Topolska S., & Labanowski J.(2009). Effect of microstructure on impact toughness of duplex and superduplex stainless steels. Journal of Achievement in Materials & Manufacturing Engineering. 36(2),142–149.
- Lo, K.H., Shek C.H., Lai J.K.L.(2009). Recent developments in stainless steels. Materials Science & Engineering:R: Reports. 65(4-6), 39–104.
- Martins M., & CastelettiL, C. (2005). Effect of heat treatment on the mechanical properties of A 890 Gr6A super duplex stainless steel. Journal of ASTM International. 2(1), 1–14.
- Karlsson L, Ryen L, & Pak S. (1995). Precipitation of intermetallic phases in 22% Cr duplex stainless weld metals. Welding Research Supplement. 74, 28–40.
- Li J., Wu T., & Riquier, Y.(1994). A phase precipitation and its effect on the mechanical properties of a super duplex stainless steel. Material Science Engineering: A. 174, 149–156.
- Pohl M., Storz O., & Glogowski T.(2007). Effect of intermetallic precipitations on the properties of duplex stainless steel. Materials Characterization. 58, 65–71.
- Olden V., Thaulow C., & Johnsen R. (2008). Modelling of hydrogen diffusion and hydrogen induced cracking in supermartensitic and duplex stainless steels. Materials & Design. 29(10), 1934–1948.
- A Review Studies on Hard-Facing of Inconel 718 on Stainless Steel 321 and 347 Grades for the Nuclear Reactor Components
Abstract Views :268 |
PDF Views:0
Authors
Affiliations
1 Department of Mechanical Engineering, National Institute of Technology, Patna, Bihar, IN
2 Department of Mechanical Engineering, Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab, IN
1 Department of Mechanical Engineering, National Institute of Technology, Patna, Bihar, IN
2 Department of Mechanical Engineering, Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab, IN
Source
Manufacturing Technology Today, Vol 19, No 3-4 (2020), Pagination: 46-52Abstract
Corrosion and wear have been a major challenge in most of the industries. There are various surface modification techniques are need to make the desired layer on the substrate such as laser hardfacing, thermal spraying, and Arc welding process because of availability and economical considerations. Arc welds pool are used. Particularly gas metal arc welding (GMAW) having a good deposition. This process has various parameters like welding current, torch speed, filler wire speed, filler metal deposition rate, shielding gas flow rate and types of shielding gases. A lot of attempts were made by the researcher to get low dilution, which usually comprises the essential corrosion resistance and wears. These results will help the researchers in selecting the best suitable welding process and materials used in hardfacing technology. This paper will give guidelines to the researchers to focus on the future scope of hardfacing technology.Keywords
Hardfacing, Gas Metal Arc Welding (GMAW), Dilution, Process Parameters.References
- Olson, D. L., Anon & Siewert, T.A. (Ed.). (1993). ASM International, Volume 6: Welding, Brazing and Soldering. ASM International.
- Cao, H., Dong, X., Chen, S., Dutka, M. & Pei, Y. (2017) Microstructure evolutions of graded high-vanadium tool steel composite coating in-situ fabricated via atmospheric plasma beam alloying. Journal of Alloys and Compounds. 720, 169–181.
- Lin, C., Chang, C., Chen, J., Hsieh, C., & Wu, W. (2010). Surface & coatings technology microstructure and wear characteristics of high-carbon Cr-based alloy claddings formed by gas tungsten arc welding (GTAW).Surface and Coating Technologies.205 (7), 2590–2595.
- Mendez, Patricio & Barnes, Nairn & Bell, Kurtis & Borle, Steven & Gajapathi, Satya & Guest, Stuart & Izadi, Hossein & KamyabiGol, Ata & Wood, Gentry. (2014). Welding processes for wear resistant overlays. Journal of Manufacturing Processes. 16 (1), 4–25.10.1016/j.jmapro.2013.06.011.
- Gülenç, B., & Kahraman, N. (2003). Wear behaviour of bulldozer rollers welded using a submerged arc welding process. Materials & Design. 24(7), 537-542.
- Sitthipong, Siva., Towatana, P., Sitticharoenchai, A., & Meengam, C. (2017). Abrasive wear behavior of surface hardfacing on propeller shaftsAISI 4140Alloy steel. Materials Today: Proceedings. 4(2), 1492-1499. 10.1016/j.matpr.2017.01.171.
- Dutra, Jair., Silva, Régis., Marques, Cleber & Viviani, Alberto. (2016). A new approach for MIG/MAG cladding with Inconel 625. Welding in the World. 60, 1201-1209. 10.1007/s40194016-0371-3.
- Govindasamy, Sayiram & N, Arivazhagan. (2015). Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel. Materials Characterization. 102, 180-188. 10.1016/j.matchar.2015.03.006.
- Ye, Xin., Zhang, Peilei., Zhao, Jian & Ma, Pan. (2018). Effect of macro- and micro-segregation on hot cracking of Inconel 718 superalloy argon-arc multilayer cladding. Journal of Materials Processing Technology. 258, 251-258.10.1016/j.jmatprotec.2018.04.004.
- Kaishu, Guan., Xiaodong, Xu., Hong, Xu., & Zhiwen, Wang. (2005). Effect of aging at 700 deg. C on precipitation and toughness of AISI 321 and AISI 347 austenitic stainless steel welds. Nuclear Engineering and Design. 235(23), 2485-2494.
- Hong, J.K., Park, J. H., Park, N. K ., Eom, I.S., Kim, M.B. & Kang, C.Y. (2008). Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding. Journal of Materials Processing Technology. 201(1-3), 515-520.10.1016/j.jmatprotec.2007.11.224.
- Shepeleva, L. & Medres, B. & Kaplan, Wayne & Weisheit, A. (2000). Laser cladding of turbine blades. Surface and Coatings Technology. 125(13), 45-48. 10.1016/S0257-8972(99)00603-9.
- Kesavan, D.& Kamaraj, M. (2010). The microstructure and high temperature wear performance of a nickel base hardfaced coating. Surface and Coatings Technology.204(24), 4034–4043
- Hou, Q.Y. (2013). Influence of molybdenum on the microstructure and properties of a FeCrBSi alloy coating deposited by plasma transferred arc hardfacing. Surface and Coatings Technology . 225, 11–20.
- Balasubramanian, V., Varahamoorthy, R., Ramachandran, C. S., & Babu, S. (2008). Abrasive slurry wear behavior of stainless steel surface produced by plasma transferred arc hardfacing process. Surface and Coatings Technology. 202 (16) 3903–3912
- Sharifitabar, Mahmood & Khaki, J. & Haddad Sabzevar, Mohsen. (2015). Microstructure and wear resistance of in-situ TiC–Al2O3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding. Surface and Coatings Technology. 285, 47-56. 10.1016/j.surfcoat.2015.11.019.
- Sadeghi, F., Naja, H., & Abbasi, A. (2017). The effect of Ta substitution for Nb on the microstructure and wear resistance of an Fe-Cr-C hardfacing alloy. Surface & Coatings Technology. 324, 85–91.
- Abed, H., Ghaini F. M., & Shahverdi, H. R. (2018). Characterization of Fe49Cr18Mo7B16C4Nb6 high-entropy hardfacing layers produced by gas tungsten arc welding (GTAW) process. Surface & Coatings Technology. 352, 360-369.
- Chang, C., Chen, Y., & Wu, W. (2010) Microstructural and abrasive characteristics of high carbon Fe – Cr – C hardfacing alloy. Tribiology International. 43(5-6) 929–934.
- Yangfan, W., Xizhang, C., & Chuanchu, S. (2019). Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing. Surface & Coatings Technologies.374 116–123.
- Varghese, P., Vetrivendan, E., Dash M. K., Ningshen, S., Kamaraj, M., & Kamachi Mudali, U. (2019). Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process. Surface & Coatings Technologies.357 1004–1013
- Selvi, S., Vishvaksenan, A., & Rajasekar, E. (2018). Cold metal transfer (CMT) technology - An overview. Defence Technology.14(1), 28–44.
- Hu, S., Zhang, H., Wang, Z., Liang, Y., & Liu, Y. (2016). The arc characteristics of cold metal transfer welding with AZ31 magnesium alloy wire. Journal of Manufacturing Processes.24(1). 298–306.
- Kirchgaßner, M., Badisch, E., & Franek, F. (2008). Behaviour of iron-based hardfacing alloys under abrasion and impact. Wear. 265(5-6), 772–779.
- Carvalho, M.C., Wang, Y., Souza, J. A. S., Braga, E. M., & Li, L. (2016). Characterization of phases and defects in chromium carbide overlays deposited by SAW process. Engineering Failure Analysis. 60, 374–382.
- Tarng, Y. S., Juang, S. C., & Chang, C. H. (2002). The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing Journal of Materials Processing. Technology.128(1–3), 1-6.
- Zahiri, R., Sundaramoorthy, R., Lysz, P. & Subramanian, C. (2014). Surface & Coatings Technology Hardfacing using ferro-alloy powder mixtures by submerged arc welding Surface & Coating Technology.260, 220–229
- Karaoǧlu, S., & Seçgin, A. (2008). Sensitivity analysis of submerged arc welding process parameters. Journal of Materials Processing. Technology.202(1-3), 500–507.
- Wang, X., Han, F., Liu, X., Qu, S., & Zou, Z. (2008). Microstructure and wear properties of the Fe-Ti-V-Mo-C hardfacing alloy. Wear. 265(5-6) 583–589.
- Yang, K., Gao,Y., Yang, K., Bao, Y., & Jiang, Y. (2017). Microstructure and wear resistance of Fe-Cr13-C-Nb hardfacing alloy with Ti addition. Wear. 376–377(B), 1091–1096.
- Xu, G., Kutsuna, M., Liu, Z., & Zhang, H. (2006) Characteristics of Ni-based coating layer formed by laser and plasma cladding processes. Materials Science & Engineering: A. 417(1-2), 63–72.
- Buchely, M. F., Gutierrez, J. C., León, L.M. & Toro, A. (2005). The effect of microstructure on abrasive wear of hardfacing alloys . Wear. 259(1-6), 52–61.
- Liu, D., Liu, R., Wei, Y., Ma, Y., & Zhu, K. (2013). Applied Surface Science Microstructure and wear properties of Fe – 15Cr – 2 . 5Ti – 2C – x B wt .% hardfacing alloys. Applied Surface Sciences. 271, 253–259.
- Singla Y K, Arora N and Dwivedi D K 2017 crossmark 105, 229–40