Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Comparative Analysis of Temperature Profiles of Various Moving Heat Sources in Arc Welding in Different Geometries


Affiliations
1 Maturi Venkata Subba Rao (MVSR) Engineering College, Nadergul, Hyderabad, India
     

   Subscribe/Renew Journal


The paper presents the temperature profiles and thermal histories during arc welding in a flat plate, solid cylinder, hollow cylinder and hollow sphere in High Strength Low Alloy steel (HSLA) material. Four different heat source models namely circular heat source, hemispherical heat source, ellipsoid heat source and double ellipsoid heat sources of second-generation are applied. The temperature profiles on the weld surface are calculated. Finite Element Analysis (FEA) is performed in order to generate the temperature distribution in different planes of the weldment using COMSOL Multiphysics. Experimental Investigations are carried out in four different geometries. The maximum temperature generated during arc welding is recorded thermocouples. Maximum temperatures obtained from theoretical calculations, numerical simulations and experimentation are compared. Close agreement is observed in the maximum temperature recorded. Variation in temperature distribution is observed between solid and hollow cross sections.

Keywords

Temperature Profiles, Moving Heat Source, Numerical Simulations, Experimentation.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Cao, Z. N., & Dong, P. (1998). Development of residual stress analysis procedure for fitness – for – service assessment of welded structures. Journal of Engineering Materials and Technology (Trans ASME). 120, 313-320.

  • Cool, T., & Bhadeshia, H. K. D. H. (1997). Austenite formation in 9Cr1Mo type power plant steels. Science and Technology of Welding and Joining. 2, 36-42.

  • Dong, Wei., Kowaka, H., Sato, Y.S., & Susumu, T. (2004). Mechanism governing nitrogen absorption by steel weld metal during laser welding. Metallurgical and Material Transactions B. 35(2), 331-338.

  • Eager, T.W., & Tsai, N.S. (1983). Temperature fields produced by traveling distributed heat sources. Welding Journal. 62(12), 346-355.

  • Goldak, J., Chakravarti, A., & Bibby, M. (1984). A new finite element model for welding heat sources. Metallurgical Transaction B. 15(2), 299-305.

  • Goldak, J.A., Patel, B., Bibby, M., & Moore, J. (1986). Computational Weld Mechanics, AGARD Conference Proceedings. 1 – 32.

  • Goldak, J., Bibby, M.J., Downey D, Gu, M. (1990). Heat and fluid flow in welds: Advanced Joining Technologies, Proceedings of the International Institute of Welding Congress on Joining Research, July

  • Goldak, J. A., & Akhlaghi, Mehdi. (2005). Computational Welding Mechanics, 1st Edition, Springer Boston MA, US.

  • Hong, T., & DebRoy, T. (2001). Effects of time, temperature, and steel composition on growth and dissolution of inclusions in liquid steels. Ironmaking & Steelmaking, 28(6), 450-454.

  • Hong, T., Pitscheneder, W., & Debroy, T. (1998). Quantitative modelling of motion, temperature gyrations, and growth of inclusions in weld pool. Science and Technology of Welding and Joining. 3(1), 33-41.

  • Kim, C.H., Zhang, W., & Debroy, T. (2003). Modeling of temperature field and solidified surface profile during gas metal arc fillet welding. Journal of Applied Physics. 94(4), 2667 - 2679.

  • Lindgren, L.E. (2001a). Finite element modeling and simulation of welding – Part 1: Increased complexity. Journal of Thermal Stresses. 24(2), 141-192.

  • Lindgren, L.E. (2001b). Finite element modeling and simulation of welding – Part 2: Improved material modeling. Journal of thermal stresses. 24(3), 195-231.

  • Lindgren, L.E. (2001c). Finite element modeling and simulation of welding – Part 3: Efficiency and integration. Journal of thermal stresses. 24(4), 305-334.

  • Masubuchi, K. (1979). Applications of Numerical Analysis in Welding,” Welding in the World, 17, (11/12), 268–291.

  • Mundra, K., Debroy, T., & Kelkar, K.M. (1996). Numerical prediction of fluid flow and heat transfer in welding with a moving heat source. Numerical Heat Transfer; Part A: Applications. 29(2), 115-129.

  • Mundra, K., Blackburn, J.M., & DebRoy, T. (1997). Absorption and transport of hydrogen during gas metal arc welding of low alloy steel. Science and Technology of Welding and Joining. 2(4), 174-184.

  • Nguyen, N.T., Ohta, A., Matsuoka, K., Suzuki, N., & Maeda, Y. (1999). Analytical solutions for transient temperature of semi-infinite body subjected to 3D moving heat sources. Supplement to the Welding Journal, 265-274.

  • Pavelic, V., Tanbakuchi, R., Uyehara, O.A., & Myers, P.S. (1969). Experimental and computed temperatures histories in gas tungsten arc welding of thin plates. Welding Journal. 48(7), 295-305.

  • Quintana, M. A., McLane, J., Babu, S. S., & David, S. A. (2001). Inclusion formation in self-shielded flux cored arc welds. Welding Journal. 80, 98-105.

  • Rosenthal, D. (1941). Mathematical theory of heat distribution during welding and cutting. Welding Journal. 20(5), 220-234.

  • Rosenthal, D. (1946). The theory of moving sources of heat and its applications to metal treatments. Transactions ASME. 43, 849-866.

  • Wu, C.S., & Dorn, L. (1994). Computer simulation of fluid dynamics and heat transfer in full penetrated tig weld pools with surface depression. Computer Material Science. 2(2), 341-349.

  • Yang, Z., Sista, S., Elmer, J. W., & DebRoy, T. (2000). Three-dimensional monte carlo simulation of grain growth during GTA welding of titanium. Acta Materialia. 48(20), 4813-4825.

  • Zhang, W., Roy, G. G., Elmer, J.W., Deb Roy, T. (2003). Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel. Journal of Applied Physics. 93, 3022.

  • Zhang, W., Kim, D.H., & DebRoy, T. (2004). Heat and fluid flow in complex joints during gas metal arc welding – Part 1: Numerical model of fillet welding. Journal of Applied Physics. 95(9), 5210 – 5219.

  • Zhao, H., & Debroy, T. (2001). Weld metal composition change during conduction mode laser welding of aluminum alloy 5182. Metallurgical and Material Transactions B. 32, 163-172.


Abstract Views: 98

PDF Views: 0




  • Comparative Analysis of Temperature Profiles of Various Moving Heat Sources in Arc Welding in Different Geometries

Abstract Views: 98  |  PDF Views: 0

Authors

J. Kandasamy
Maturi Venkata Subba Rao (MVSR) Engineering College, Nadergul, Hyderabad, India
P. Sai Mohith
Maturi Venkata Subba Rao (MVSR) Engineering College, Nadergul, Hyderabad, India

Abstract


The paper presents the temperature profiles and thermal histories during arc welding in a flat plate, solid cylinder, hollow cylinder and hollow sphere in High Strength Low Alloy steel (HSLA) material. Four different heat source models namely circular heat source, hemispherical heat source, ellipsoid heat source and double ellipsoid heat sources of second-generation are applied. The temperature profiles on the weld surface are calculated. Finite Element Analysis (FEA) is performed in order to generate the temperature distribution in different planes of the weldment using COMSOL Multiphysics. Experimental Investigations are carried out in four different geometries. The maximum temperature generated during arc welding is recorded thermocouples. Maximum temperatures obtained from theoretical calculations, numerical simulations and experimentation are compared. Close agreement is observed in the maximum temperature recorded. Variation in temperature distribution is observed between solid and hollow cross sections.

Keywords


Temperature Profiles, Moving Heat Source, Numerical Simulations, Experimentation.

References