Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Influence of the Process Parameters on Electro Chemical Micro Machining-A Brief Review


Affiliations
1 Dept. of Mechanical Engineering, YSR Engineering College of YVU, Proddatur, Kadapa A.P, India
     

   Subscribe/Renew Journal


Electro Chemical Micro Machining (ECMM) is an unconventional machining technique which is used in a large range of industries such as from medical to aero. This paper intends to go over the main points and some of the major parameters used in Electro Chemical Micro Machining which are going to affect Material Removal Rate (MRR), Dimensional Deviation or Over Cut (OC) and to review existing knowledge and draw attention to current challenges, restrictions and advantages in the field of ECMM.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Pan Zou; Manik Rajora; Mingyou Ma; Hungyi Chen; Wenchieh Wu; Steven Y Liang: Electrochemical Micro-Machining Process Paramete Optimization Using a Neural Network-GeneticAlgorithm Based Approach, 'International Journal of Materials, Mechanics and Manufacturing', vol. 6, no. 2, April 2018.

  • Yanfei Lu; Manik Rajora; Pan Zou and Steven Y Liang: Physics-Embedded Machine Learning: Case Study with Electrochemical Micro-Machining, Academic Editors: Xiaoliang Jin and Dan Zhang Received: Published: 17 January 2017

  • Zishanur Rahman; Alok Kumar Das & Somnath Chattopadhyaya: Microhole drilling through electrochemical processes: A review, 'Materials and Manufacturing Processes', ISSN: 1042-6914 (Print) 1532-2475 2017.

  • Thanigaivelan, R; Arunachalam, R M; Mukesh Kumar & Bhanu Prakash Dheeraj: Performance of electrochemical micromachining of copper through infrared heated electrolyte, 'Materials and Manufacturing Processes', ISSN: 1042-6914 1532-2475 2017.

  • Wei Hana and Masanori Kuniedaa: Influence of machining conditions on machining characteristics of Microrods by Micro-ECM with electrostatic induction feeding method, 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM XVIII) Procedia CIRP 42 819 – 824 2016.

  • Babu, B; Dharmalingam, S; Karthikeyan, S K; Karthik, R; Vairamani, V: Investigation of Electro Chemical Micro Machining process parameters on Al- SiCp - Gr Composites using Taguchi Methodology, 'International Journal of ChemTech Research CODEN (USA): IJCRGG', ISSN: 0974-4290, vol. 8, no. 8, 2015, 278-285.

  • Bhattacharyya, B and Munda, J: Experimental investigation on the influence of electrochemical machining parameters on machining rate and accuracy in micro-machining domain, 'International Journal of Machine Tools & Manufacture', vol. 43, 1301-1310, 2003.

  • Bhattacharyya, B; Doloi, B; and Sridhar, PS: Electrochemical micromachining: New possibilities for micro-manufacturing, 'Journal of Materials Processing Technology', vol. 113, 301-305, 2001.

  • Bhattacharyya, B; Malapati, M; Munda, J and Sarkar, A: Influence of tool vibration on machining performance in electrochemical micromachining of copper, 'International Journal of Machine Tool and manufacture', vol. 47, 335-342, 2007.

  • Bhattacharyya, B; Mitra, S and Boro, A: Electrochemical machining: New possibilities for micromachining, 'Robotics and Computer Integrated manufacturing', vol. 18, 283-289, 2002.

  • Bhattacharyya, B; Munda, J and Malapati, M: Advancement in electrochemical micro machining, 'International Journal of Machine Tools & Manufacture', vol. 44, 1577-1589, 2004.

  • Bhattacharyya, B and Munda, J: Experimental investigation into electrochemical micromachining (EMM) process, 'Journal of Materials Processing Technology, vol. 140, 287-291, 2003.

  • Dayanand, SB; Jain, VK; Shekhar, R and Anjali, VK: Hole quality and inter electrode gap dynamics during pulse current electrochemical deep hole drilling, 'International Journal of Advanced Manufacturing Technology', vol. 34, 79-95, 2007.

  • Sorkhel, SK and Bhattacharyya, B: Computer aided design of tools in ECM for accurate job machining, 'Proc. ISEM-9', Japan, 240-243, 1989.

  • Reed, Roger C: The Super alloys: Fundamentals and Applications. Cambridge, UK: Cambridge UP, 2006.

  • Thanigaivelan, R and Arunachalam, RM: Study of dominant variables in Electrochemical Micromachining, 'Manufacturing Technology Today', 2010, 9(1): 22-28.

  • Ayyappan, S and Sivakumar, K: Investigation of electrochemical machining characteristics of 20MnCr5 alloy steel using potassium dichromate mixed aqueous NaCl electrolyte and optimization of process parameters, 'Proc IMechE, Part B: J Engineering Manufacture', 2015.

  • Thanigaivelan, R and Arunachalam, R: Optimization of process parameters on machining rate and overcut in electrochemical micromachining using grey relational analysis. J Sci Ind Res 2013; 72: 36-42.

  • Jain, VK; Kalia, S; Sidpara A, et al. Fabrication of microfeatures and micro-tools using electrochemical micromachining, 'Int J Adv Manuf Tech', 2012; 61: 1175–1183.

  • Fan, ZW; Hourng, LW; Lin, MY: Experimental investigation on the influence of electrochemical micro-drilling by short pulsed voltage, 'Int J Adv Manuf Tech', 61: 957–966, 2012,

  • Wu, X; Qu, N; Zeng, Y et al.: Modelling of the liquid membrane electrochemical etching of a nano-tip, 'Int J Adv Manuf Tech', 69: 723–729, 2013.

  • Wang, M; Peng, W; Yao, C et al.: Electrochemical machining of the spiral internal turbulator, 'Int J Adv Manuf Tech', 2010; 49: 969–973.

  • Rupinder Singh; Khambab, JS: Ultrasonic machining of titanium and its alloys: A review, Journal of Materials Processing Technology 173, 2006, 125–135.

  • Jain, VK and Rajurkar, KP: An integrated approach for tool design in electrochemical micro machining, 'Precision engineering', 13 (2), 111-124, 1991.

  • De Silva and McGeough, JA: Process monitoring of electrochemical micro machining, 'Int. J. of Materials processing technology', 76, 1998, 165-169.

  • Kozak, J; Rajurkar, KP; and Makkar, Y: Selected problems of micro-electrochemical machining, 'Journal of Materials Processing Technology', vol. 149, no. 1-3, 426-431, 2004.

  • Kock, M; Kirchner, V; and Schuster, R: Electrochemical micromachining with ultrashort voltage pulses–a versatile method with lithographical precision, 'Electrochimica Acta', vol. 48, 3213-3219, 2003.

  • Stofesky, DB: Manufacturing with micro ECM, 'Proc. of ASME Intl. Conf. on Manufacturing Science and Engineering', 2006.

  • Tsuneo, Kurita; Kunito, Chikamori; Shinichirou Kubota and Mitsuro Hattori: A study of three dimensional shape machining with an ECMM system, 'International Journal of Machine Tools and Manufacture', 2006, 46: 1311-1318, 2006.

  • Zhang, Z; Zhu, D; Qu, N and Wang; M: Theoretical and Experimental investigation on electrochemical micro machining, 'Microsyst Technol'., vol. 13, 607-612, 2007.

  • Ahna, Se Hyun; Shi Hyoung Ryua; Deok Ki Choi and Chong Nam Chua: Electro-chemical micro drilling using ultra short pulses, Precision Engineering, 28: 129-134, 2004.

  • Mukherjee, SK; Kumar, S and Srivastava, PK Effect of over voltage on material removal rate during electrochemical machining.” Tamkang Journal of Science and Engineering, vol. 8, no.1, 923-28, 2005


Abstract Views: 201

PDF Views: 2




  • Influence of the Process Parameters on Electro Chemical Micro Machining-A Brief Review

Abstract Views: 201  |  PDF Views: 2

Authors

K. Samson Praveen Kumar
Dept. of Mechanical Engineering, YSR Engineering College of YVU, Proddatur, Kadapa A.P, India
G. Jaya Chandra Reddy
Dept. of Mechanical Engineering, YSR Engineering College of YVU, Proddatur, Kadapa A.P, India

Abstract


Electro Chemical Micro Machining (ECMM) is an unconventional machining technique which is used in a large range of industries such as from medical to aero. This paper intends to go over the main points and some of the major parameters used in Electro Chemical Micro Machining which are going to affect Material Removal Rate (MRR), Dimensional Deviation or Over Cut (OC) and to review existing knowledge and draw attention to current challenges, restrictions and advantages in the field of ECMM.

References