Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Investigations on Wire Edm of AI-SiC Composite Using Taguchi’s Approach


Affiliations
1 Department of Mechanical Engineering, Sree Vidyanikethan Engineering College Autonomous), Tirupati, Andhra Pradesh, India
     

   Subscribe/Renew Journal


The machinability study on Wire Electro Discharge Machining (WEDM) of Al6061/20%SiC has been investigated in the present exploration. The objective of this present investigation is to determine the best possible process parameter to obtain better machining performance during wire EDM of Al6061 matrix reinforced with 20 wt. % SiC which is fabricated through the stir casting processes. The machining parameters such as pulse on time, pulse off time (delay time) and servo voltage are deemed as input process variables. Rate of material removal and roughness of the machined surface were considered as performance measures under this investigation. Taguchi’s design of experiment approach has been adopted for designing the experimental runs and L9 orthogonal array has been selected for conducting the experiments. Analysis of Variance (ANOVA) is adopted for ascertaining the significance of process parameters. Taguchi’s response analysis has been employed to determine the ascendancy of process parameters and the optimum process parameters were determined to obtain better machining performance.

Keywords

Al-SiC Composites, WEDM, Taguchi’s Approach, Orthogonal Array, ANOVA, Optimization.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Kılıckap, E; Cakır, O; Aksoy, M; Inan, A: Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite, 'Journal of Materials Processing Technology', 2005, 164, 862-867.

  • Muthukrishnan, N; Murugan, M; Rao, KP: Machinability issues in turning of Al-SiC (10p) metal matrix composites, 'The International Journal of Advanced Manufacturing Technology', 39(3-4), 2008, 211-218.

  • Bhushan, RK; Kumar, S; Das, S: Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite. The International Journal of Advanced Manufacturing Technology, 50 (5-8), 2010, 459-469.

  • Manna, A; Bhattacharayya, B: A study on machinability of Al/SiC-MMC, 'Journal of Materials Processing Technology', 140 (1-3), 2003, 711-716.

  • Ozben, T; Kilickap, E; Cakır, O: Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC, 'Journal of Materials Processing Technology', 198 (1-3), 2008, 220-225.

  • Balbir Singh; Jatinder Kumar; Sudhir Kumar; Influences of Process Parameters on MRR Improvement in Simple and Powder-Mixed EDM of AA6061/10%SiC Composite, 'Journal of Materials and Manufacturing Processes', 30 (3), 2015.

  • Ho, KH; Newman, ST; Rahimifard, S; Allen, RD: State of the art in wire electrical discharge machining (WEDM), 'International Journal of Machine Tools and Manufacture', 44 (12-13), 2004, 1247-1259.

  • Ross, PJ: Taguchi Techniques for Quality Engineering, McGraw-Hill, New York, USA, Chap. 7, 2005.

  • Sahoo, AK & Pradhan, S: Modeling and optimization of Al/SiCp MMC machining using Taguchi approach, 'Measurement', 46 (9), 2013, 3064-3072.

  • Chiang, KT & Chang, FP Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis, 'Journal of Materials Processing Technology', 180 (1-3), 2006, 96-101.

  • Huang, JT & Liao, YS: Optimization of machining parameters of wire-EDM based on grey relational and statistical analyses, 'International Journal of Production Research', 41(8), 2003, 1707-1720.

  • Kanlayasiri, K & Boonmung, S: Effects of wire-EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and regression model, 'Journal of Materials Processing Technology', 192, 2007, 459-464.

  • Ramakrishnan, R & Karunamoorthy, L: Multi response optimization of wire EDM operations using robust design of experiments. 'The International Journal of Advanced Manufacturing Technology', 29 (1-2), 2006, 105-112.

  • Yang, RT; Tzeng, CJ; Yang, YK; Hsieh, MH: Optimization of wire electrical discharge machining process parameters for cutting tungsten, 'The International Journal of Advanced Manufacturing Technology', 60 (1-4), 2012, 135-147.

  • Singh, B; Kumar, J; Kumar, S: Investigation of the tool wear rate in tungsten powder-mixed electric discharge machining of AA6061/10% SiCp composite. Materials and manufacturing processes, 31(4), 2016, 456-466.

  • Bhushan, RK: Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. Journal of Cleaner Production, 39, 2013, 242-254.

  • Suresh Kumar, S; Uthayakumar, M; Kumaran, S T; Parameswaran, P; Mohandas, E: Electrical discharge machining of Al (6351)-5% SiC-10% B 4 C hybrid composite: a grey relational approach, 'Modelling and Simulation in Engineering', 2014, 24.

  • Thirumalai Kumaran, S & Uthayakumar, M: Investigation on the machining studies of AA6351-SiC-B4C hybrid metal matrix composites, 'International Journal of Machining and Machinability of Materials' 2, 15(3-4), 2014, 174-185.

  • Suresh Kumar, SS; Uthayakumar, M; Kumaran, ST; Parameswaran, P; Mohandas, E; Kempulraj, G & Natarajan, SA: Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis, 'Journal of Manufacturing Processes', 20, 2015, 33-39


Abstract Views: 233

PDF Views: 2




  • Experimental Investigations on Wire Edm of AI-SiC Composite Using Taguchi’s Approach

Abstract Views: 233  |  PDF Views: 2

Authors

N. Manikandan
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College Autonomous), Tirupati, Andhra Pradesh, India
K. C. Varaprasad
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College Autonomous), Tirupati, Andhra Pradesh, India
J. S. Binoj
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College Autonomous), Tirupati, Andhra Pradesh, India
S. Sree Sabari
Department of Mechanical Engineering, Sree Vidyanikethan Engineering College Autonomous), Tirupati, Andhra Pradesh, India

Abstract


The machinability study on Wire Electro Discharge Machining (WEDM) of Al6061/20%SiC has been investigated in the present exploration. The objective of this present investigation is to determine the best possible process parameter to obtain better machining performance during wire EDM of Al6061 matrix reinforced with 20 wt. % SiC which is fabricated through the stir casting processes. The machining parameters such as pulse on time, pulse off time (delay time) and servo voltage are deemed as input process variables. Rate of material removal and roughness of the machined surface were considered as performance measures under this investigation. Taguchi’s design of experiment approach has been adopted for designing the experimental runs and L9 orthogonal array has been selected for conducting the experiments. Analysis of Variance (ANOVA) is adopted for ascertaining the significance of process parameters. Taguchi’s response analysis has been employed to determine the ascendancy of process parameters and the optimum process parameters were determined to obtain better machining performance.

Keywords


Al-SiC Composites, WEDM, Taguchi’s Approach, Orthogonal Array, ANOVA, Optimization.

References