Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Combined Quality Loss (CQL) Concept in WPCA Based Taguchi Philosophy for Optimization of Multiple Surface Quality Characteristics of 6061-T4 Aluminum in Cylindrical Grinding


Affiliations
1 Dept. of Mechanical Engg., KIT University, Bhubaneswar, India
2 Dept. of Mechanical Engg., National Institute of Technology (NIT), Rourkela, India
3 Dept. of Mechanical Engg., Jadavpur University, Raja S. C. Mallik Road, Kolkata, India
     

   Subscribe/Renew Journal


The present study highlights a multi-objective optimization problem by applying weighted principal component analysis (WPCA) coupled with Taguchi method through a case study in cylindrical grinding of 6061-T4 Aluminum. The study aimed at evaluating the best process environment which could simultaneously satisfy multiple requirements of surface quality. In view of the fact, that traditional Taguchi method cannot solve a multi-objective optimization problem; to overcome this limitation, WPCA has been coupled with Taguchi method. Furthermore to follow the basic assumption of Taguchi method i.e. quality attributes should be uncorrelated or independent; which is not always satisfied in practical situation. To overcome this short coming the study applied Weighted Principal Component analysis (WPCA) to eliminate response correlation and to evaluate independent or uncorrelated quality indices called Principal Components which were aggregated to compute overall quality index denoted as multi-response performance index (MPI). A combined quality loss (CQL) was then estimated which was optimized (minimized) finally. The study combined WPCA and Taguchi method for predicting optimal setting. Optimal result was verified through confirmatory test. This indicates application feasibility of the aforesaid methodology proposed for multi-response optimization and off-line control of correlated multiple surface quality characteristics in cylindrical grinding.


User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 166

PDF Views: 0




  • Combined Quality Loss (CQL) Concept in WPCA Based Taguchi Philosophy for Optimization of Multiple Surface Quality Characteristics of 6061-T4 Aluminum in Cylindrical Grinding

Abstract Views: 166  |  PDF Views: 0

Authors

Bharat Chandra Routara
Dept. of Mechanical Engg., KIT University, Bhubaneswar, India
Saumya Darsan Mohanty
Dept. of Mechanical Engg., National Institute of Technology (NIT), Rourkela, India
Saurav Datta
Dept. of Mechanical Engg., National Institute of Technology (NIT), Rourkela, India
Asish Bandyopadhyay
Dept. of Mechanical Engg., Jadavpur University, Raja S. C. Mallik Road, Kolkata, India
Siba Sankar Mahapatra
Dept. of Mechanical Engg., National Institute of Technology (NIT), Rourkela, India

Abstract


The present study highlights a multi-objective optimization problem by applying weighted principal component analysis (WPCA) coupled with Taguchi method through a case study in cylindrical grinding of 6061-T4 Aluminum. The study aimed at evaluating the best process environment which could simultaneously satisfy multiple requirements of surface quality. In view of the fact, that traditional Taguchi method cannot solve a multi-objective optimization problem; to overcome this limitation, WPCA has been coupled with Taguchi method. Furthermore to follow the basic assumption of Taguchi method i.e. quality attributes should be uncorrelated or independent; which is not always satisfied in practical situation. To overcome this short coming the study applied Weighted Principal Component analysis (WPCA) to eliminate response correlation and to evaluate independent or uncorrelated quality indices called Principal Components which were aggregated to compute overall quality index denoted as multi-response performance index (MPI). A combined quality loss (CQL) was then estimated which was optimized (minimized) finally. The study combined WPCA and Taguchi method for predicting optimal setting. Optimal result was verified through confirmatory test. This indicates application feasibility of the aforesaid methodology proposed for multi-response optimization and off-line control of correlated multiple surface quality characteristics in cylindrical grinding.