Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

General Tribological Evaluation of Deep Drawing Oils


Affiliations
1 Dept of Production Engg, Sinhgad College of Engineering, Pune, India
2 MGM's College of Engineering, Nanded, India
3 Dept of Production Engg, Sinhgad College of Engineering, Pune, India
     

   Subscribe/Renew Journal


Performance based rating of mineral based oils used for deep drawing operation assume a lot of significance. The synergistic effect of different concentrations of sulfur and ester in base oil was evaluated for extreme pressure and anit-wear following ASTM D2783 and ASTM D4172 standards. A total of six lubricating blends were formulated and compared their performance with base oil. Tests were conducted on DUCOM TR-30L four ball tester and wear scar diameter were measured on optical microscope. Compatibility of additives has been discussed on the basis of various parameters like wear scar diameter (WSD), weld load (WL), and load wear index (LWI) which could act as indicators for performance rating.

Keywords

Anti-Wear, Extreme Pressure Additives, Weld Load, Load Wear Index.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 165

PDF Views: 0




  • General Tribological Evaluation of Deep Drawing Oils

Abstract Views: 165  |  PDF Views: 0

Authors

B. D. Bachchhav
Dept of Production Engg, Sinhgad College of Engineering, Pune, India
G. S. Lathkar
MGM's College of Engineering, Nanded, India
H. Bagchi
Dept of Production Engg, Sinhgad College of Engineering, Pune, India

Abstract


Performance based rating of mineral based oils used for deep drawing operation assume a lot of significance. The synergistic effect of different concentrations of sulfur and ester in base oil was evaluated for extreme pressure and anit-wear following ASTM D2783 and ASTM D4172 standards. A total of six lubricating blends were formulated and compared their performance with base oil. Tests were conducted on DUCOM TR-30L four ball tester and wear scar diameter were measured on optical microscope. Compatibility of additives has been discussed on the basis of various parameters like wear scar diameter (WSD), weld load (WL), and load wear index (LWI) which could act as indicators for performance rating.

Keywords


Anti-Wear, Extreme Pressure Additives, Weld Load, Load Wear Index.