Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Some Aspects on Weldability of Aluminium-Lithium Alloy


Affiliations
1 Metallurgical Engg. Dept., Jadavpur University, Kolkata - 700032, India
2 Jadavpur University, India
     

   Subscribe/Renew Journal


The effect of welding conditions, technique and filler wire type have been studied to understand their effect on the size and width of nondendritic equiaxed grain of GTA weld in alloy 1441-T8. The microstructure of all the welds exhibited a fusion boundary equiaxed zone (EQZ). In addition to heat input, filler wire type and welding technique are found to have considerable effect on the grain size and width of EQZ.

Keywords

Fusion Boundary, Equiaxed Zone (EQZ), Partially Melted Zone, Fusion Zone, GTA Welding, Pulsating Technique.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 218

PDF Views: 6




  • Some Aspects on Weldability of Aluminium-Lithium Alloy

Abstract Views: 218  |  PDF Views: 6

Authors

T. K. Pal
Metallurgical Engg. Dept., Jadavpur University, Kolkata - 700032, India
S. Neogy
Jadavpur University, India

Abstract


The effect of welding conditions, technique and filler wire type have been studied to understand their effect on the size and width of nondendritic equiaxed grain of GTA weld in alloy 1441-T8. The microstructure of all the welds exhibited a fusion boundary equiaxed zone (EQZ). In addition to heat input, filler wire type and welding technique are found to have considerable effect on the grain size and width of EQZ.

Keywords


Fusion Boundary, Equiaxed Zone (EQZ), Partially Melted Zone, Fusion Zone, GTA Welding, Pulsating Technique.