Open Access Open Access  Restricted Access Subscription Access

Effect of Length Ratio on Heat Exchange Rate by a Triangular Heat Generating Conductive Body Inside an Enclosure


Affiliations
1 School of Engg., Gautam Buddha University, Greater Noida, Uttar Pradesh, India
 

   Subscribe/Renew Journal


This paper presents a numerical analysis of the conjugate heat exchange inside a square enclosure full of a copper-water nanofluid. The enclosure also contains a heat-generating solid triangular block (a source of heat) at the center. While the horizontal walls of the enclosure are viewed as adiabatic, its perpendicular walls are operated at a consistently low temperature. The second order upwind scheme is used for the convective term and SIMPLE algorithm, to lead the numerical analysis and solve the discrete equations using the commercial software FLUENT 15.0. The consequences of the numerical investigations are then used to clear up the effect of length-ratio and transfer of heat. As per observations, the expansion in the length-ratio influences the rate of heat transfer.

Keywords

Conjugate Heat Exchanger, Enclosure, Nano-Fluid, Natural Convection, Nusselt Number, Rayleigh Number.
User
Subscription Login to verify subscription
Notifications
Font Size

  • T. Saitoh and K. Hirose. 1989. High-accuracy benchmark solutions to natural convection in a square cavity, Comput. Mech., 4(6), 417-427. https://doi.org/10.1007/BF00293047.
  • G.D.V. Davis. 1983. Natural convection of air in a square cavity a benchmark solution, Int. J. Numer. Meth. Fluids, 3(3), 249-264. https://doi.org/10.1002/fld.1650030305.
  • G. Saha, S. Saha, M.Q. Islam and M.A.R. AKhanda. 2007. Natural convection in enclosure with discrete isothermal heating from below, J. Naval Arch. Mar. Eng., 4(1), 1-13.
  • J.M. House, C. Beckermann and T.E. Smith. 1990. Effect of a centered conducting body on natural convection transfer of heat in an enclosure, Numer. Transfer of heat Part A, 18(2), 213-225.
  • J.Y. Oh, M.Y. Ha and K.C. Kim. 1997. Numerical study of transfer of heat and flow of natural convection in an enclosure with a heat generating conducting body, Numer. Transfer of Heat - Part A, 31(3), 289-303.
  • J.R. Lee and M.Y. Ha. 2006. Numerical simulation of natural convection in a horizontal enclosure with a heatgenerating conducting body, Int. J. Heat Mass Transfer, 49(15-16), 2684-2702. https://doi.org/10.1016/j.ijheatmasstransfer.2006.01.010.
  • A. Raisi. 2017. Transfer of heat in an enclosure filled with a nano-fluid and containing a heat-generating conductive body, Applied Thermal Engg., 110, 469-480. https://doi.org/10.1016/j.applthermaleng.2016.08.183.
  • M.M. Rahman, M.A. Alim, S. Saha and M.K. Chowdhury. 2008. A numerical study of mixed convection in a square cavity with a heat conducting square cylinder at different locations, J. Mech. Engg., 39(2), 78-85.
  • J. Lu, B. Shi, Z. Guo and Z. Chai. 2009. Numerical study on natural convection in a square enclosure containing a rectangular heated cylinder, Front. Energy Power Eng., 3(4), 373–380. https://doi.org/10.1007/s11708-009-0078x.
  • Y. Varol. 2011. Natural convection in porous triangular enclosure with a cantered conducting body, Int. Commun. Heat Mass Transfer, 38(3), 368-376. https://doi.org/10.1016/j.icheatmasstransfer.2010.12.013.
  • M.M. Rahman, S. Parvin, N.A. Rahim, M.R. Islam, R. Saidur and M. Hasanuzzaman. 2012. Effects of Reynolds and Prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block, Appl. Math. Model, 36(5), 2056-2066.
  • B. Ghasemi and S.M. Aminossadati. 2009. Natural convection heat transfer in an inclined enclosure filled with a water - Cu nano-fluid, Numer. Heat Transfer-Part A, 55(9), 807-823.

Abstract Views: 183

PDF Views: 103




  • Effect of Length Ratio on Heat Exchange Rate by a Triangular Heat Generating Conductive Body Inside an Enclosure

Abstract Views: 183  |  PDF Views: 103

Authors

Mohammad Ahmad
School of Engg., Gautam Buddha University, Greater Noida, Uttar Pradesh, India
Harish Chandra Thakur
School of Engg., Gautam Buddha University, Greater Noida, Uttar Pradesh, India

Abstract


This paper presents a numerical analysis of the conjugate heat exchange inside a square enclosure full of a copper-water nanofluid. The enclosure also contains a heat-generating solid triangular block (a source of heat) at the center. While the horizontal walls of the enclosure are viewed as adiabatic, its perpendicular walls are operated at a consistently low temperature. The second order upwind scheme is used for the convective term and SIMPLE algorithm, to lead the numerical analysis and solve the discrete equations using the commercial software FLUENT 15.0. The consequences of the numerical investigations are then used to clear up the effect of length-ratio and transfer of heat. As per observations, the expansion in the length-ratio influences the rate of heat transfer.

Keywords


Conjugate Heat Exchanger, Enclosure, Nano-Fluid, Natural Convection, Nusselt Number, Rayleigh Number.

References





DOI: https://doi.org/10.4273/ijvss.10.5.15