ICTACT Journal on Microelectronics

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Design Of High Performance Double Tail Comparator


Affiliations
1 Department of Electronics and Communication Engineering, Saintgits College of Engineering, India
     

   Subscribe/Renew Journal


Comparator is an important building blocks used in analog-to-digital converters. Its function is to compare two analog inputs and delivers a logic value at the output. In this project an analysis on the delay of various dynamic comparators are presented. Based on the analysis a new dynamic comparator is designed for fast operations. Positive feedback mechanism is used to regenerate the analog input signal into full scale digital level. This design is a modification of conventional double-tail comparator. Addition of a few transistors to the conventional double-tail comparator results in remarkably reduced time delay. Kick-back noise of this comparator is also reduced. The large voltage variations in the internal nodes are coupled to the input nodes, which will disturb the input nodes-this is called kick-back noise. This is reduced by inserting switches before the input transistors of comparator. The performance of conventional comparator and proposed comparator circuits are evaluated based on Cadence 180nm CMOS process models.

Keywords

Analog To Digital Converter (ADC), Double Tail Comparator, Kick Back Noise.
Subscription Login to verify subscription
User
Notifications
Font Size

  • Samanesh Babayan-Mashhadi and Reza Lotfi, “Analysis and Design of a Low-Voltage-Power Double-Tail Comparator”, IEEE Transactions on Very Large Scale Integration Systems, Vol. 22, No. 2, pp. 343-352, 2014.

  • D. Shinkel, E. Mensink, E. Klumperink, E. Van Tuiji and B. Nauta, “A Double-Tail Latch-Type Voltage Sense Amplifier with 18ps Setup+Hold Time”, Proceedings of IEEE International Solid-State Circuits Conference, pp. 314-315, 2007.

  • Pedro M. Figueiredo and Joao C. Vital, “Kick-back Noise Reduction Techniques for CMOS Latched Comparators”, IEEE Transactions on Circuits and Systems-II: Express Briefs, Vol. 53, No. 7, pp. 541-545, 2006.

  • B. Goll and H. Zimmermann, “A 0.12 μm CMOS Comparator requiring 0.5V at 600MHz and 1.5V at 6GHz”, Proceedings of IEEE International Solid-State Circuits Conference, pp. 316-317, 2007.

  • A. Mesgarani, M.N. Alam, F.Z. Nelson and S.U. Ay, “Supply Boosting Techniques for Designing very Low-Voltage Mixed-Signal Circuits in Standard CMOS”, Proceedings of 53rd IEEE International Midwest Symposium on Circuits and Systems, pp. 893-896, 2010.

  • B. Goll and H. Zimmermann, “A 65nm CMOS Comparator with modified latch to achieve 7GHz/1.3mW at 1.2V and 700MHz/47μW at 0.6V”, Proceedings of IEEE International Solid-State Circuits Conference, pp. 328-329, 2009.

  • B. Goll and H. Zimmermann, “A Comparator with Reduced Delay Time in 65-nm CMOS for Supply Voltages Down to 0.65V”, IEEE Transactions on Circuits and Systems-II: Express Briefs, Vol. 56, No. 11, pp. 810-814, 2009.

  • Jun He, Sanyi Zhan, Degang Chen and Randall L. Geiger, “Analyses of Static and Dynamic Random Offset Voltages in Dynamic Comparatos”, IEEE Transactions on Circuits and Systems-I: Regular papers, Vol. 56, No. 5, pp. 911-919, 2009

  • P. Amaral, J. Goes, N. Paulino and A. Steiger-Garcao, “An Improved Low-Voltage Low-Power CMOS Comparator to be used in High-Speed Pipeline ADCs”, Proceedings of IEEE International Symposium on Circuits and Systems, pp. 141-144, 2002.

  • Y. Wang and B. Razavi, “An 8-bit 150-MHz CMOS A/D Converter”, IEEE Journal of Solid-State Circuits, Vol. 35, No. 3, pp. 308-317, 2000.

  • L.Y. Nathawad, R. Urata, B.A. Wooley and D.A.B. Miller, “A 40-GHz-Bandwidth, 4-bit, Time-Interleaved A/D Converter using Photoconductive Sampling”, IEEE Journal of Solid-State Circuits, Vol. 38, No. 12, pp. 2021-2030, 2000.

  • Ata Khorami and Mohammad Sharifkhani, “A High-Speed Method of Dynamic Comparators for SAR Analog to Digital Converters”, Proceedings of IEEE 59th International Midwest Symposium on Circuits and Systems, pp. 1-4, 2016.


Abstract Views: 156

PDF Views: 0




  • Design Of High Performance Double Tail Comparator

Abstract Views: 156  |  PDF Views: 0

Authors

P. M. Saranya
Department of Electronics and Communication Engineering, Saintgits College of Engineering, India
G. Jyothish Chandran
Department of Electronics and Communication Engineering, Saintgits College of Engineering, India
K. S. Shilpa
Department of Electronics and Communication Engineering, Saintgits College of Engineering, India

Abstract


Comparator is an important building blocks used in analog-to-digital converters. Its function is to compare two analog inputs and delivers a logic value at the output. In this project an analysis on the delay of various dynamic comparators are presented. Based on the analysis a new dynamic comparator is designed for fast operations. Positive feedback mechanism is used to regenerate the analog input signal into full scale digital level. This design is a modification of conventional double-tail comparator. Addition of a few transistors to the conventional double-tail comparator results in remarkably reduced time delay. Kick-back noise of this comparator is also reduced. The large voltage variations in the internal nodes are coupled to the input nodes, which will disturb the input nodes-this is called kick-back noise. This is reduced by inserting switches before the input transistors of comparator. The performance of conventional comparator and proposed comparator circuits are evaluated based on Cadence 180nm CMOS process models.

Keywords


Analog To Digital Converter (ADC), Double Tail Comparator, Kick Back Noise.

References