International Journal of Emerging Trends in Science & Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Review Paper on Safety Induction, Quality Control, Productivity Calculation for Residential Building


Affiliations
1 Assistant Professor, Department of Civil Engineering, M.Kumarasamy College of Engineering, Karur, Tamil Nadu, India
2 Assistant Professor, Department of Civil Engineering, K.Ramakrishnan College of Technology, Tamil Nadu
     

   Subscribe/Renew Journal


The Aim of project is to find the Productivity for finishing works in the Construction Industry and suggest some ideas to overcome the delaying factors. In this project, we include safety induction, planning, and finishing activities work procedure, quality control, productivity and rate analysis. Every organization requires more productivity which increase their profit, quality and to reduce cost and time. Therefore, we have collected productivity data for certain finishing activities (Block Works, Cement Plastering,) from the industry for 30 working days. We could also able to learn the importance of Safety both inside and outside the site through the video screened and the Safety Practices by the Industry. From the Quality Control we have learnt the test to be carried out for different materials and works

Keywords

Finishing Activities, Productivity, Quality Control, Safety Measures
User
Subscription Login to verify subscription
Notifications
Font Size

  • M. O. Agwu, “Organisational culture and employees performance in the national agency for food and drugs administration and control (NAFDAC) Nigeria,” Global Journal of Management and Business Research: A Administration and Management, vol. 14, no. 2, 2014. Accessed: Mar. 10, 2017. [Online]. Available: https://globaljournals.org/GJMBR_Volume14/1-Organizational-Culture-and-Employees-Performance.pdf

  • A. A. Attar, A. K. Gupta, and D. B. Desai, “A study of various factors affecting labour productivity and methods to improve it,” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), vol. 1, no. 3, pp. 11-14, 2012.

  • J. Choi, and R. E. Minchin Jr., “Workflow management and productivity control for asphalt pavement operations,” Canadian Journal of Civil Engineering, vol. 33, pp. 1039-1049, 2006.

  • A. L. Huang, R. E. Chapman, and D. T. Butry, “Metrics and tools for measuring construction productivity: Technical and empirical considerations,” Gaithersburg, Maryland: U.S. Department of Commerce National Institute of Standards and Technology, 2009.

  • P. F. Kaming, P. O. Olomolaiye, G. D. Holt, and F. C. Harris, “Factors influencing craftsmen’s productivity in Indonesia,” International Journal of Project Management, vol. 15, no. 1, pp. 21-30, 1997.

  • C. Lindsay, “Labour productivity,” Special Feature, Labour Market Division, Office for National Statistics, pp. 447-453, 2004. Accessed: Mar. 10, 2017. [Online]. Available: http://www.ons.gov.uk/ons/rel/lms /labour-market-trends--discontinued-/volume-112--no--11/labour-productivity.pdf

  • S. Mojaheed, “A project improvement system for effective management of construction projects,” Ph.D. thesis, Agricultural and Mechanical College, Louisiana State University, 2005.

  • I. A. Odesola, K. C. Okolie, and J. N. Nnametu, “A comparative evaluation of labour productivity of wall plastering activity using work study,” PM World Journal, vol. 4, no. 5, pp. 1-10, 2015.

  • I. A. Odesola, “Construction labour productivity as a correlate of project performance: An empirical evidence for wall plastering activity,” Civil Engineering Dimension, Journal of Civil Engineering Science and Application, vol. 17, no. 1, pp. 1-10, 2015.

  • I. A. Odesola, and G. I. Idoro, “Construction labour productivity as a correlate of project performance: An empirical evidence for blockwork activity,” in Proceedings of CIB Conference 2014, 2014, pp. 376-387.

  • I. A. Odesola, and O. Okwuashi, “Work study on labour productivity of blockwork activity in South-South, Nigeria,” Journal of Research and Innovations in Engineering (JORIE), vol. 1, no. 1, pp. 50-60, 2016.

  • I. A. Odesola, and N. W. Ulaeto, Developing labour productivity index for floor screed activity for sustainable built environment in Delta State, Nigeria. The Built Environment: Achieving Environmental Sustainability, Inclusive Growth and Competitiveness in the Twenty-First Century. in Proceedings of the First International Conference of the Faculty of Environmental Studies (FESIC): Faculty of Environmental Studies, University of Uyo, Uyo, Nigeria, 2016, pp. 70-79.

  • I. A. Odesola, and J. U. Wilson, “Construction labour productivity as a correlate of project performance: An empirical evidence for floor screed activity,” in Envriomental Planning and Resource Development in the Niger Delta Region, Nigeria – A Book of Readings, J. Uyanga, and E. Ikurekong, Eds. Uyo: Department of Urban and Regional Planning, Faculty of Environmental Studies, University of Uyo, 2015, pp. 346-365.

  • A. Rangaraj, and S. Rubini, “Study on characteristics strength of concrete by partial replacement of coarse aggregate,” Journal of Chemical and Pharmaceutical Sciences, special issue 3, pp. 110-113, Feb. 2017.

  • A. Rangaraj, and P. Mukesh, “An experimental investigation on partial replacement of bitumen using rubber tyre,” Materials Today Proceeding, p. 6, Feb. 2019.

  • A. Rangaraj, and N. P. Srinivasan, “Experimental investigation on partial replacement of bitumen with sugarcane molasses and quarry dust,” Adalya Journal, 2019.

  • A. Rangaraj, “Review paper on partial replacement of recycled aggregates on concrete,” Test Engineering and Management, Mar. 2020.

  • A. S. Rathod, R. G. Jadhav, and A. B. Babar, “An overview of method study and study of different recording techniques,” International Journal of Science and Research (IJSR), 2016. Accessed: Mar. 10, 2017. [Online]. Available: https://www.ijsr.net/archive/v5i8/ART20161250.pdf

  • P. Schreyer, “Measuring productivity,” Conference on Next Steps for the Japanese SNA, Tokyo, 2005. Accessed: Mar. 10, 2017. [Online]. Available: http://www.esri.go.jp/jp/workshop/050325/050325paper06.pdf.


Abstract Views: 108

PDF Views: 0




  • Review Paper on Safety Induction, Quality Control, Productivity Calculation for Residential Building

Abstract Views: 108  |  PDF Views: 0

Authors

A. Rangaraj
Assistant Professor, Department of Civil Engineering, M.Kumarasamy College of Engineering, Karur, Tamil Nadu, India
P. Mukesh
Assistant Professor, Department of Civil Engineering, M.Kumarasamy College of Engineering, Karur, Tamil Nadu, India
S. Vigneshkannan
Assistant Professor, Department of Civil Engineering, K.Ramakrishnan College of Technology, Tamil Nadu

Abstract


The Aim of project is to find the Productivity for finishing works in the Construction Industry and suggest some ideas to overcome the delaying factors. In this project, we include safety induction, planning, and finishing activities work procedure, quality control, productivity and rate analysis. Every organization requires more productivity which increase their profit, quality and to reduce cost and time. Therefore, we have collected productivity data for certain finishing activities (Block Works, Cement Plastering,) from the industry for 30 working days. We could also able to learn the importance of Safety both inside and outside the site through the video screened and the Safety Practices by the Industry. From the Quality Control we have learnt the test to be carried out for different materials and works

Keywords


Finishing Activities, Productivity, Quality Control, Safety Measures

References