Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Optimal Location of the Static Capacitor Bank:A Case Study of Power Factor Improvement at Jajang Iron and Manganese Mines, Odisha


Affiliations
1 Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
2 Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
     

   Subscribe/Renew Journal


Majority of losses occur in the transmission and distribution network. Transfer of energy from the generating source to the consumers is accompanied by the losses. Placement of the shunt capacitors in the distribution system leads to reduction of power losses. Reduction of the power losses is important to increase the efficiency of the system. As the load in the system is varying the capacitor requires the switching property. This paper presents a method for reducing the losses associated with the reactive component, finding the best possible location for the placement of the capacitors and real time capacitor size at Jajang iron and manganese mines located at Odisha for supplying the reactive current to the system so that the annual cost is reduced and savings is initiated.


Keywords

Capacitor, Power Factor, Switching, SCADA.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 166

PDF Views: 3




  • Optimal Location of the Static Capacitor Bank:A Case Study of Power Factor Improvement at Jajang Iron and Manganese Mines, Odisha

Abstract Views: 166  |  PDF Views: 3

Authors

Abhijeet Shrivastava
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
Devejya Anand
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
Dheeraj Kumar Mandal
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
Babli Kumari
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
Dig Vijay
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India
V. Ganesan
Department of Electrical and Electronics Engineering, Dr. M.G.R. Educational and Research Institute, University, Chennai, Tamil Nadu, India

Abstract


Majority of losses occur in the transmission and distribution network. Transfer of energy from the generating source to the consumers is accompanied by the losses. Placement of the shunt capacitors in the distribution system leads to reduction of power losses. Reduction of the power losses is important to increase the efficiency of the system. As the load in the system is varying the capacitor requires the switching property. This paper presents a method for reducing the losses associated with the reactive component, finding the best possible location for the placement of the capacitors and real time capacitor size at Jajang iron and manganese mines located at Odisha for supplying the reactive current to the system so that the annual cost is reduced and savings is initiated.


Keywords


Capacitor, Power Factor, Switching, SCADA.