Refine your search
Collections
Journals
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Rai, Piyush
- Finite Element-Based Simulation and Analysis of Dragline Bucket in Static and Dynamic Loading Condition
Abstract Views :224 |
PDF Views:89
Authors
Affiliations
1 Indian Institute of Technology (BHU), Varanasi 221 005, IN
1 Indian Institute of Technology (BHU), Varanasi 221 005, IN
Source
Current Science, Vol 116, No 4 (2019), Pagination: 612-619Abstract
Draglines are bulky and expensive machines widely utilized in opencast mines for overburden stripping. Due to tedious working conditions, a variety of fatigue failures in dragline components are common. Bucket is one of the main components of dragline, and it is a source of external load on the machinery than its interaction through broken rock material directly. Hence, dragline buckets are the most vulnerable components of wear, tear and related failures. This article analyses the von Mises stresses using the finite element method (FEM) under the static and dynamic loading conditions. In this study, the three-dimensional solid bucket models were developed in AUTO CAD and were investigated for stress, deformation, and safety factor on the dragline bucket under static and dynamic loading conditions using the ANSYS 18 software. FEM outcomes have been highlighted from teeth, the arc of anchors and hitch elements have a maximum value of stress and a minimum value of safety factor under various loading conditions. The purpose of this study was to prognosticate the bucket failure, the strength of bucket teeth and identify the sensitive areas of the dragline bucket.Keywords
Dragline Bucket, Loading Conditions, Static and Dynamic.References
- Azam, S. F. and Rai, P., Modelling of dragline bucket for determination of stress. ASME J., 2018, 78, 392–402.
- Golbasi, O. and Demirel, N., Investigation of stress in an earthmover bucket using finite element analysis: A generic model for draglines. J. S. Afr. Inst. Min. Metall., 2015, 115(7), 623–628.
- Abo-Elnor, M., Hamilton, R. and Boyle, J. T., Simulation of soil– blade interaction for sandy soil using advanced 3D finite element analysis. Soil Till. Res., 2004, 75(1), 61–73.
- Costello, M. and Kyle, J., A method for calculating static conditions of a dragline excavation system using dynamic simulation. Math. Comput. Model., 2004, 40(3–4).
- Coetzee, C. J. and Els, D. N. J., The numerical modelling of excavator bucket filling using DEM. J. Terramechanics, 2009, 46(5), 217–227.
- Coetzee, C. J., Els, D. N. J. and Dymond, G. F., Discrete element parameter calibration and the modelling of dragline bucket filling. J. Terramechanics, 2010, 47(1), 33–44.
- Bende, S. B. and Awate, N. P., Design, modeling and analysis of excavator arm. Int. J. Design Manuf. Technol., 2013, 4, 14–20.
- Tupkar, M. P. and Zaveri, S. R., Design and analysis of an excavator bucket. Int. J. Sci. Res. Eng. Technol., 2015, 4(3), 227– 229.
- Ozdogan, M. and Machinery, I., Walking dragline bucket penetration mechanism and penetration forces, 2015; https://doi.org/10.13140/RG.2.1.2304.8406.
- Abo-Elnor, M., Hamilton, R. and Boyle, J. T., 3D Dynamic analysis of soil-tool interaction using the finite element method. J. Terramechanics, 2003, 40(1), 51–62.
- McKyes, E. (ed.), Soil Cutting and Tillage, Elsevier, Amsterdam, 1985, p. 7.
- Hettiaratchi, D. R. P. and Reece, A. R., The calculation of passive soil resistance. Geotechnique, 1974, 24(3), 289–310.
- Mouazen, A. M. and Neményi, M., Finite element analysis of subsoiler cutting in non-homogeneous sandy loam soil. Soil Till. Res., 1999, 51(1–2), 1–15.
- Influence of Rake Angle, Bucket Width and Teeth Depth of Dragline Bucket on the Resistive Force in Different Rock Types
Abstract Views :312 |
PDF Views:89
Authors
Affiliations
1 Indian Institute of Technology, Banaras Hindu University, Varanasi 221 005, IN
1 Indian Institute of Technology, Banaras Hindu University, Varanasi 221 005, IN
Source
Current Science, Vol 118, No 1 (2020), Pagination: 26-28Abstract
Draglines are used to dispose the overburden for exposing minerals in a surface mine. Draglines may be greater than 4000 t in overall weight, with bucket capacity ranging from 24 to 120 m3. The buckets are dragged against the blasted muck to fill the blasted overburden materials1. Bucket teeth fail easily while the excavator is being operated due to the fact that they are in direct touch with the rocks. The bucket teeth have an appropriate geometrical design for longer life and cost reduction2.References
- Azam, S. F. and Rai, P., ASME J., 2018, 78, 392–402.
- Cristine, H. and Tasevski, A., Design of Bucket Teeth, Master thesis, Academy of Innovation, Design and Engineering, Malardalen University, Sweden, 2016.
- Khedkar, Y., Dey, T. and Padasalagi, Y., J. Appl. Mech. Eng., 2017, 6(5); doi: 10.4172/2168-9873.1000282.
- Lomate, S., Biradar, S., Dhumal, K. and Waychal, A., Int. Res. J. Eng. Tech., 2016, 3(8), 1423–1429.
- Ozdogan, M., Bucket penetration mechanism and bucket penetration forces of walking draglines, 2015; doi:10.13140/RG.2.1.2304.8406.
- Ozdogan, M. and Qzdoganb, H., Digging forces of electric rope shovel and adjustments made for a better digging shovel having optimum dipper rake and tooth angles. In International Black Sea Mining and Tunneling Symposium, Trabzon, Turkey, 2–4 November 2016.
- Suryo, S. H., Bayuseno, A. P., Jamari, J. and Wahyudi, A. I., Civ. Eng. J., 2018, 3(12), 1222–1234.
- Golbasi, O. and Demirel, N., J. S. Afr. Inst. Min. Metall., 2015, 115(7), 623– 628.
- Abo-Elnor, M., Hamilton, R. and Boyle, J. T., Soil Tillage Res., 2004, 75(1), 61–73.
- McKyes, E. (ed.), Soil Cutting and Tillage, Elsevier, Amsterdam, 1985, p. 7.
- Strength, R., MChapter 14. Landslides. Investigation and Mitigation, 1996, 1586, 372.
- Zhu, T. Y., Some useful numbers on the engineering properties of materials (geologic and otherwise). GEOL 615, Department of Geophysics, 2012.
- Porosity Prediction from Offshore Seismic Data of F3 Block, the Netherlands using Multi-Layer Feed-Forward Neural Network
Abstract Views :242 |
PDF Views:105
Authors
Affiliations
1 Department of Mining Engineering, Indian Institute of Technology (BHU), Varanasi 221 005, IN
2 Department of Geophysics, Institute of Science, Banaras Hindu University, Varanasi 221 005, IN
1 Department of Mining Engineering, Indian Institute of Technology (BHU), Varanasi 221 005, IN
2 Department of Geophysics, Institute of Science, Banaras Hindu University, Varanasi 221 005, IN
Source
Current Science, Vol 119, No 10 (2020), Pagination: 1652-1662Abstract
In the present study, seismic and well log information is incorporated with a multi-layer feed-forward neural network (MLFN) to predict porosity in the inter-well region. The aim of this study is to estimate a relationship between porosity and impedance to characterize the reservoir, if any, in the offshore F3 block, the Netherlands. MLFN is used to generate a connection between porosity logs and a set of seismic attributes, which are further used for porosity prediction. Modelbased inversion is employed to produce an acoustic impedance volume, which is a reliable technique for quantitative estimation of reservoir characteristics and acoustic impedance. The model-based inversion results indicate that the acoustic impedance (AI) in the region varies from 2500 to 6200 m/s*g/cm3, which is comparatively low and indicates loose formation. Thereafter, AI along with other attributes estimated from seismic data, is used as an input in MLFN, and porosity is predicted. The technique is first implemented on the traces close to well locations, and the findings are correlated with well log information, and after appropriate matching, the entire seismic segment is inverted for porosity. The results indicate that the porosity varies from 0.07 to 0.40. Further, a relationship between predicted porosity and inverted impedance is derived to represent the connection between these two parameters in the region. Moreover, based on this study, it is concluded that there is no significant reservoir in the region. However, as the analyses are performed for a specific range of data, it is possible that other parts of the area may have a different stratigraphy and possibility of the primary reservoir in the area.Keywords
Acoustic Impedance, Multi-layer Feed-forward Neural Network Reservoir, Porosity, Seismic Inversion.- Evaluation of ground vibrations induced by blasting in a limestone quarry
Abstract Views :157 |
PDF Views:87
Authors
Punit Paurush
1,
Piyush Rai
1
Affiliations
1 Department of Mining Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi 221 005, IN
1 Department of Mining Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi 221 005, IN
Source
Current Science, Vol 122, No 11 (2022), Pagination: 1279-1287Abstract
Despite being a versatile and low-cost method, rock blasting produces undesirable severe effects. The present study aims to examine the ground vibrations produced by blasting, which are of serious concern to mine operators as well as the nearby inhabitants. Forty-nine field-scale trial blasts were conducted and recorded to measure ground vibrations produced by blasting in a limestone quarry in Rajasthan, India. The multivariate linear regression (MLR) and artificial neural network (ANN) techniques were used to predict the peak particle velocity (PPV) with distance between the blasting site and measuring station, charge per delay and scaled distance as the input parameters. Subsequently, a coefficient of determination (R2) was calculated using MLR and ANN approaches. Additionally, to verify whether the recorded events exceeded the threshold levels, the values of PPV and dominant frequency propounded by the United States Bureau of Mines (USBM), German standard (DIN), and Director General of Mines Safety, India were carefully scrutinized. Results were compared based on R2 values obtained by the USBM predictor equation, MLR and ANN techniques. It was found that ANN provided a good prediction with a high degree of correlation (0.901) in comparison to MLR (0.754). Also, frequency analysis for the study field showed that the dominance of frequencies was in the range 10–40 Hz. Although the values were within safe limits, disturbances may be witnessed in nearby structures if PPV values are high at lower frequency range.References
- Uysal, O., Erarslan, K., Cebi, M. A. and Akcakoca, H., Effect of barrier holes on blast induced vibration. Int. J. Rock Mech. Min. Sci., 2008, 45(5), 712–719.
- Ozdemir, K., Kahriman, A., Tuncer, G., Akgundogdu, A., Elver, E. and Ucan, O. N., Fragmentation assessment using a new image processing technique based on adaptive neuro fuzzy inherence systems. In Proceedings of the Annual Conference on Explosives and Blasting Technique, International Society of Explosives Engi-neers, 2004, vol. 2, pp. 181–188.
- Felice, J. J., Applications of modelling to reduce vibration and airblast levels. In International Symposium on Rock Fragmenta-tion by Blasting, Vienna, 1993, pp. 145–151.
- Tuncer, G., Kahriman, A., Ozdemir, K., Guven, S., Ferhatoglu, A. and Gezbul, T., The damage risk evaluation of ground vibration induced by blasting in Naipli Quarry. In Third International Con-ference Modern Management of Mine Producing, Geology and Environmental Protection, Varna, Bulgaria, 2003, pp. 9–13.
- Erarslan, K., Uysal, Ö., Arpaz, E. and Cebi, M. A., Barrier holes and trench application to reduce blast induced vibration in Sey-itomer coal mine. J. Environ. Geol., 2008, 54(6), 1325–1331.
- Uysal, O. and Cavus, M., Effect of a pre-split plane on the frequencies of blast induced ground vibrations. Acta Montan. Slovaca, 2013, 18(2), 101–109.
- Görgülü, K., Arpaz, E., Uysal, Ö., Durutürk, Y. S., Yüksek, A. G., Koçaslan, A. and Dilmaç, M. K., Investigation of the effects of blasting design parameters and rock properties on blast-induced ground vibrations. Arab. J. Geosci., 2015, 8(6), 4269–4278.
- Amiri, M., Hasanipanah, M. and Amnieh, H. B., Predicting ground vibration induced by rock blasting using a novel hybrid of neural network and itemset mining. J. Neural Comput. Appl., 2020, 9, 1–9.
- Zouari, H., Geodynamic evolution of centro meridional atlas of Tunisia. Stratigraphy, geometric analysis, cinematic and tectono-sedimentary. Ph D thesis, University of Tunis II, Tunisia, 1995.
- Görgülü, K., Arpaz, E., Demirci, A., Koçaslan, A., Dilmaç, M. K. and Yüksek, A. G., Investigation of blast-induced ground vibra-tions in the Tülü boron open pit mine. Bull. Eng. Geol. Environ., 2013, 72(3–4), 555–564.
- Ozer, U., Kahriman, A., Aksoy, M., Adiguzel, D. and Karadogan, A., The analysis of ground vibrations induced by bench blasting at Akyol quarry and practical blasting charts. J. Environ. Geol., 2008, 54(4), 737–743.
- Azizabadi, H. R., Mansouri, H. and Fouché, O., Coupling of two methods, waveform superposition and numerical, to model blast vibration effect on slope stability in jointed rock masses. J. Com-put. Geotech., 2014, 61, 42–49.
- Saadat, M., Khandelwal, M. and Monjezi, M., An ANN-based approach to predict blast-induced ground vibration of Gol-E-Gohar iron ore mine, Iran. J. Rock Mech. Geotech. Eng., 2014, 6(1), 67–76.
- Ambraseys, N. N. and Hendron, A. J., In Dynamic Behaviour of Rock Masses, John Wiley, London, 1968.
- Langefors, U. and Kihlström, B., The Modern Technique of Rock Blasting, John Wiley, New York, 1978, p. 438.
- Ghosh, A. and Daemen, J. K., A simple new blast vibration pre-dictor of ground vibrations induced predictor. In Proceedings of the 24th US Symposium on Rock Mechanics, Texas, USA, 1983.
- Roy, P. P., Vibration control in an opencast mine based on improved blast vibration predictors. J. Min. Sci. Technol., 1991, 12(2), 157–165.
- Singh, V. K., Singh, D. and Singh, T. N., Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks. Int. J. Rock Mech. Min. Sci., 2001, 38(2), 269–284.
- Singh, T. N., Kanchan, R., Saigal, K. and Verma, A. K., Predic-tion of p-wave velocity and anisotropic property of rock using artificial neural network technique. Council of Scientific and In-dustrial Research, 2004.
- Kosko, B., Neural networks and fuzzy systems: a dynamical systems approach to machine intelligence, Prentice Hall, Eng-lewood Cliffs, NJ, 1992, p. 449.
- Meulenkamp, F. and Grima, M. A., Application of neural net-works for the prediction of the unconfined compressive strength (UCS) from Equotip hardness. Int. J. Rock Mech. Min. Sci., 1999, 36(1), 29–39.
- Khandelwal, M. and Singh, T. N., Evaluation of blast-induced ground vibration predictors. J. Soil Dyn. Earthq. Eng., 2007, 27(2), 116–125.
- Siskind, D. E., Structure, response and damage produced by ground vibration from surface mine blasting. US Department of the Interior, Bureau of Mines, New York, USA, 1980.
- GSO, Vibrations in building construction. DIN 4150, German Standards Organization, Berlin, 1984.
- Adhikari, G. R., Jain, N. K., Roy, S., Theresraj, A. I., Balachander, R., Venkatesh, H. S. and Rn, G., Control measures for ground vibration induced by blasting at coal mines and assessment of damage to surface structures. J. Rock Mech. Tunnel. Technol., 2006, 12(1), 3–19.
- Abdel-Rasoul, E. I., Measurement and analysis of the effect of ground vibrations induced by blasting at the limestone quarries of the Egyptian cement company. ICEHM 2000, Cairo University, Egypt, 2000, pp. 54–71.
- Dowding, C. H., Suggested method for blast vibration monitoring. Int. J. Rock Mech. Min. Geomech. Abstr., 1992, 29(2), 143–156.
- Monjezi, M., Rizi, S. H., Majd, V. J. and Khandelwal, M., Artifi-cial neural network as a tool for backbreak prediction. J. Geotech. Geol. Eng., 2014, 32(1), 21–30.
- Zhongya, Z. and Xiaoguang, J., Prediction of peak velocity of blasting vibration based on artificial neural network optimized by dimensionality reduction of FA-MIV. J. Math. Prob. Eng., 2018, 12.
- Lawal, A. I. and Idris, M. A., An artificial neural network-based mathematical model for the prediction of blast-induced ground vibrations. Int. J. Environ. Stud., 2020, 77(2), 318–334.
- Leondes, C. T., Neural network systems techniques and applica-tions. In Advances in Theory and Applications, Academic Press, 1998.
- Blackwell, W. J. and Chen, F. W., Neural Networks in Atmospheric Remote Sensing, Artech House, 2009, pp. 78–90.
- Nicholls, H. R., Blasting vibrations and their effects on structures. US Department of the Interior, Bureau of Mines, 1971, pp. 656–660.
- Rorke, A. J., Blasting impact assessment for the proposed new largo colliery based on new largo mine plan 6. J. AJR NL001 2011 Rev., 2011.
- Aloui, M., Bleuzen, Y., Essefi, E. and Abbes, C., Ground vibra-tions and air blast effects induced by blasting in open pit mines: case of Metlaoui Mining Basin, south western Tunisia. J. Geol. Geophys., 2016, 5(3), 1–8.
- Ak, H., Iphar, M., Yavuz, M. and Konuk, A., Evaluation of ground vibration effect of blasting operations in a magnesite mine. J. Soil Dyn. Earthq. Eng., 2009, 29(4), 669–676.
- DGMS, Damage of structures due to blast induced ground vibra-tions in the mining area. Directorate General of Mines and Safety, Technical (S&T) Circular No. 7, 1997, pp. 9–12.