Current Science

Open Access Open Access  Restricted Access Subscription Access

A Data-Driven Approach to Predict Anthropometric Dimensions of Central Indian Women Workers via Principal Component and Factorial Analysis


Affiliations
1 Mechanical Processing Division, ICAR-National Institute of Natural Fibre Engineering and Technology, Kolkata 700 040, India., India
2 All India Coordinated Research Project-ESA Scheme, ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
3 ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
4 Dr Balasaheb Sawant Konkan Krishi Vidyapeeth, Dapoli 415 712, India., India
 

In India, the contribution of women workers in agriculture is steadily increasing daily, which governs a major share of the Indian agriculture sector. Hence farm tools and equipment must be designed by considering region-specific anthropometric data of women workers. However, measuring and recording anthropometric dimensions is time-consuming and economically taxable. In the present study, regression models have been developed to predict different anthropometric dimensions using anthropometric data of 79 body dimensions of 720 women workers in central India aged between 25 and 55 years. Principal component and factorial analysis techniques were employed to extract significant body dimensions. The major objective of this study was to predict various anthropometric dimensions by regression models so that the time and effort required for several body dimension measurements would be reduced.

Keywords

Agriculture, Correlation, Factor Analysis, Prin-Cipal Component Analysis, Women Workers.
User
Notifications
Font Size

  • Mehta, C. R., Chandel, N. S. and Senthilkumar, T., Status, chal-lenges and strategies for farm mechanization in India. Agric. Mech. Asia, Afr. Latin Am., 2014, 45(4), 43–50.

  • Feyzi, M., Navid, H. and Dianat, I., Ergonomically based design of tractor control tools. Int. J. Ind. Ergon., 2019, 72, 298–307.

  • Singh, S. and Arora, R., Ergonomic intervention for preventing mus-culoskeletal disorders among farm women. J. Agric. Sci., 2010, 1(2), 61–71.

  • Dewangan, K. N., Owary, C. and Datta, R. K., Anthropometric data of female farm workers from north eastern India and design of hand tools of the hilly region. Int. J. Ind. Ergon., 2008, 38(1), 90–100.

  • Ali, İ. and Arslan, N., Estimated anthropometric measurements of Turkish adults and effects of age and geographical regions. Int. J. Ind. Ergon., 2009, 39(5), 860–865.

  • Ramachandran, M. and Komandur, S., Survey of anthropometric data collection methods of Indian population for design of propor-tional medical devices. In Symposium on Human Factors and Ergo-nomics in Health Care, 2012, pp. 208–211.

  • Chao, Y. P., Kao, T. W., Chang, Y. W., Peng, T. C., Chen, W. L. and Wu, L. W., Utilization of anthropometric parameters as a novel tool for detection of insulin resistance. Clin. Nutr., 2020, 39(8), 2571–2579.

  • Tewari, V. K., Ailavadi, R., Dewangan, K. N. and Sharangi, S., Ratio-nalized database of Indian agricultural workers for equipment de-sign. Agric. Eng. Int.: the CIGRE J., 2007, 9(1), 1–12.

  • Bhattacharjya, B. R. and Kakoty, S. K., Presenting an iterative in-novation framework perceived for resource-constrained society. IEEE International Symposium on Innovation and Entrepreneurship (TEMS-ISIE), Hangzhou, China, 2019, pp. 1–7.

  • Bhattacharjya, B. R. and Kakoty, S. K., A survey of the anthropometric data relating to five ethnic groups in Assam considering gender and ethnic diversity: application of the data in designing an improvised pedal-operated chaak. Int. J. Ind. Ergon., 2020, 76, 102927.

  • Dewangan, K. N., Kumar, G. P., Suja, P. L. and Choudhury, M. D., Anthropometric dimensions of farm youth of the north eastern re-gion of India. Int. J. Ind. Ergon., 2005, 35(11), 979–989.

  • Dewangan, K. N., Gogoi, G., Owary, C. and Gorate, D. U., Isomet-ric muscle strength of male agricultural workers of India and the design of tractor controls. Int. J. Ind. Ergon., 2010, 40(5), 484–491.

  • Vyavahare, R. T. and Kallurkar, S. P., Anthropometry of male agri-cultural workers of western India for the design of tools and equipments. Int. J. Ind. Ergon., 2016, 53, 80–85.

  • Khadem, M. M. and Islam, M. A., Development of anthropometric data for Bangladeshi male population. Int. J. Ind. Ergon., 2014, 44(3), 407–412.

  • Lu, J. M. and Wang, M. J. J., Automated anthropometric data collection using 3D whole body scanners. Expert Syst. Appl., 2008, 35(1–2), 407–414.

  • Liu, K., Wang, J., Kamalha, E., Li, V. and Zeng, X., Construction of a prediction model for body dimensions used in garment pattern making based on anthropometric data learning. J. Text. Inst., 2017, 108(12), 2107–2114.

  • Zhou, X., Chen, J., Chen, G., Zhao, Z. and Zhao, Y., Anthropometric body modeling based on orthogonal-view images. Int. J. Ind. Ergon., 2016, 53, 27–36.

  • Majumder, J., Mehta, C. R. and Khadatkar, A., Anthropometric and Strength Data of Indian Agricultural Workers for Farm Equipment Design (ed. Gite, L. P.), Central Institute of Agricultural Engineer-ing, Bhopal, 2009.

  • Webb Associates, Anthropology Research Project (Webb Associates), Space Administration. Scientific and Technical Information Office. Anthropometric Source Book: Anthropometry for Designers (Vol. 1), National Aeronautics and Space Administration, Scientific and Technical Information Office, USA, 1978.

  • Hertzberg, H. T. E., The conference on standardization of anthro-pometric techniques and terminology. Am. J. Phys. Anthropol., 1968, 28(1), 1–16.

  • Kaiser, H. F., The varimax criterion for analytic rotation in factor analysis. Psychometrika, 1958, 23(3), 187–200.

  • Kroemer, K. H., Kroemer, H. J. and Kroemer-Elbert, K. E., Engi-neering Physiology, Springer, Heidelberg, Germany, 2010.

  • Patel, T., Sanjog, J., Chatterjee, A. and Karmakar, S., Statistical inter-pretation of collected anthropometric data of agricultural workers from northeast India and comparison with national and international databases. IIE Trans. Occup. Ergon. Hum. Factors, 2016, 4(4), 197–210.


Abstract Views: 80

PDF Views: 57




  • A Data-Driven Approach to Predict Anthropometric Dimensions of Central Indian Women Workers via Principal Component and Factorial Analysis

Abstract Views: 80  |  PDF Views: 57

Authors

Manisha Jagadale
Mechanical Processing Division, ICAR-National Institute of Natural Fibre Engineering and Technology, Kolkata 700 040, India., India
K. N. Agrawal
All India Coordinated Research Project-ESA Scheme, ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
C. R. Mehta
ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
R. R. Potdar
ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
Manoj Kumar
ICAR-Central Institute of Agriculture Engineering, Bhopal 462 038, India., India
Mahesh Jadhav
Dr Balasaheb Sawant Konkan Krishi Vidyapeeth, Dapoli 415 712, India., India

Abstract


In India, the contribution of women workers in agriculture is steadily increasing daily, which governs a major share of the Indian agriculture sector. Hence farm tools and equipment must be designed by considering region-specific anthropometric data of women workers. However, measuring and recording anthropometric dimensions is time-consuming and economically taxable. In the present study, regression models have been developed to predict different anthropometric dimensions using anthropometric data of 79 body dimensions of 720 women workers in central India aged between 25 and 55 years. Principal component and factorial analysis techniques were employed to extract significant body dimensions. The major objective of this study was to predict various anthropometric dimensions by regression models so that the time and effort required for several body dimension measurements would be reduced.

Keywords


Agriculture, Correlation, Factor Analysis, Prin-Cipal Component Analysis, Women Workers.

References





DOI: https://doi.org/10.18520/cs%2Fv124%2Fi2%2F215-225