Current Science

Open Access Open Access  Restricted Access Subscription Access

The History of Liquid Metal Pump Development in India


Affiliations
1 No. D/9, Runwal Paradise, Bhusari Colony, Pune 411 038, India
2 Sodium Experiments and Hydraulics Division, Fast Reactor Technology Group, Sodium Pumps Section, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, India
3 Sodium Pumps Section, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, India
 

In a fast breeder reactor, the liquid sodium coolant is circulated through the core using vertical centrifugal pumps. These pumps are critical equipment for reactor operation and they have many unique design features. Indigenous development of pumps is vital for the demonstration and expansion of fast reactor technology which constitutes the critical second stage of our three-stage programme.

Indigenous design and development of vertical centrifugal sodium pumps was taken up more than two decades ago in close collaboration with Indian industry. This article provides an account of the work done in the areas of pump hydraulics, mechanical design and testing, and manufacture.


Keywords

Cavitation, Liquid Metal, Model Testing, Manufacture, Sodium Centrifugal Pump.
User
Notifications
Font Size

  • Kale, R. D. et al., Design, construction and testing of 50 m3/h sodium pump. In Symposium on Indigenous Equipment, Bhabha Atomic Research Centre, Mumbai, 1987.

  • EDD, Quarterly progress report. Engineering Development Division, IGCAR, Kalpakkam, January–March 1988.

  • Guidez, J. and Jolly, J., Assessment of the availability and reliability of the French PHENIX fast breeder after 12 years operation. In Proceedings of International Conference on Fast Breeder Systems: Experience Gained and Path to Economic Power Generation, Washington, USA, 1987.

  • Unusual occurrences during LMFBR operation, Proceeding of a Technical Committee Meeting, IAEA TECDOC-1180, Vienna, 9–13 November 1998.

  • Gregory, C. V., A review of the operation of the prototype fast reactor. Nucl. Energy, 1992, 31.

  • Rineisky, A. A., Chushkin, V. N., Kamaev, A. A., Oshanov, N. N. and Potapov, O. A., The utility of BN-600 reactor operating experience on the choice of design and technological decisions of fast reactors under design. In Indo-Soviet Seminar, Obninsk, Russia, 1989.

  • Zerinvary, M. C., Nixon, D. R. and Wasko, J., FFTF prototype pump testing. WEMD, Cheswick, Pa.

  • Operating experience with nuclear power stations in member states in 1986, IAEA, 1986.

  • Hydraulic Institute Standards 14.6, 2011.

  • Fakkel, R. H. et al., Comparison of cavitation tests on SNR 300 prototype sodium pump c108/74. University of Bath, UK, 1974.

  • Rao, A. S. L. K., Kale, R. D., Chougule, R. J. and Joshi, S. G., Cavitation performance tests on primary pump model of a nuclear power plant. In ASME, Fluids Engineering Conference, Incline Village, USA, 1994.

  • Rao, A. S. L. K., Sreedhar, B. K., Kale, R. D., Chougale, R. J. and Joshi, S. G., Performance testing of a reactor prototype pump. In 24th National Conference on Fluid Mechanics and Fluid Power, Kolkata, 1997.

  • Konnao, D. and Yamada, Y., Does impeller trim affect NPSHR. In Proceedings of the First International Pump Symposium, Texas A&M University, USA, 1984.

  • Sreedhar, B. K. and Kale, R. D., The effect of impeller trim on pump suction capability. In ASME Symposium on Cavitation in Fluid Machinery, British Columbia, Canada, 1996.

  • Manufacture development of primary sodium pump. A status Report, IGCAR, Kalpakkam, 1990.

  • Sreedhar, B. K., Rao, A. S. L. K., Prabhakar, R. and Kale, R. D., Development of centrifugal pump for nuclear application – detection of cavitation erosion by paint erosion technique. In 29th National Conference on FMFP, Jamshedpur, 1999.

  • Gulich, J. F. and Pace, S., Quantitative prediction of cavitation erosion in centrifugal pumps. In IAHR symposium, Paper No. 42, Montreal, Canada, 1986.

  • Sreedhar, B. K., Rao, A. S. L. K. and Prabhakar, R., Development of primary sodium pump hydraulics through model studies, IGCAR Internal Report No. PFBR/32110/DN/1084/R-A, December 2001.

  • Asok Kumar, S., Thirumalai, R., Rao, A. S. L. K., Prakash, V. and Prabhakar, R., Rotor dynamic experiments for primary sodium pump. IGCAR Internal Report No. PFBR/3211/EX/1083/R-A, April 2002.

  • Asok Kumar, S., Thirumalai, R., Prakash, V. and Prabhakar, R., Rotor dynamic studies for large vertical pump. Adv. Vibr. Eng., 2006, 5(4), 333–351.

  • Testing of pump to pipe connection of primary sodium pump. IGCAR Internal Report No. PFBR/32110/DN/1070.

  • Sreedharan, K. V., Athmalingam, S., Balasubramaniyan, V., Rao, A. S. L. K., Chellapandi, P. and Chetal, S. C., Design and manufacture of sodium pumps of 500 MWe Prototype Fast Breeder Reactor(PFBR). In Proceedings of 20th Annual Conference of Indian Nuclear Society, Chennai, 2010.

  • Minutes of the meeting between KBL, IGCAR, BHAVINI and NPCIL at Kirlsokarvadi, Maharashtra dated 1/3/2013 to 9/3/2013.

  • Minutes of the meeting between KBL, IGCAR, BHAVINI and NPCIL at Kirlsokarvadi, Maharashtra dated 30/10/2013 to 31/10/2013.

  • Buschman, H. W., Experimental Breeder Reactor-II: 20 years of operating experience. Nucl. Saf., 1985, 26(4), 493–502.

  • Duffy, J. G. and Wagner, H. A., Operating experience with major components at the Enrico Fermi power plant. In Proceedings of IAEA Symposium on Performance of Nuclear Power Reactor Components, Prague, Czech Republic, 1969.

  • Vautrey, L., Fast reactor development in France. International Working Group on Fast Reactors, First Annual Meeting, Vienna, Austria, 1968.

  • Gryazev, V. M. et al., Four years’ operating experience on the BOR-60 nuclear power station. In Proceedings of International Conference on Fast Reactor Power Stations, British Nuclear Energy Society, London, 1974.

  • Sauvage, M., Broomfield, M. and Marth, W., Overview on European fast reactor operating experience. In Proceedings of International Conference on Fast Reactors and Related Fuel Cycles, FR-91, Japan, 1991.

  • Broomfield, A. M. et al., Experience from prototype and test reactors in western Europe. In Proceedings of International Conference on Fast Breeder Systems: Experience Gained and Path to Economic Power Generation, Washington, USA, 1987.

  • Troyanov, M. F. and Rineisky, A. A., Status of fast reactor activities in the USSR. In 24th Annual Meeting of International Working Group on Fast Reactors, Tsuruga, Japan, 1991.

  • Status of liquid metal cooled fast reactor technology. IAEA-TECDOC-1083, International Atomic Energy Agency, Vienna, April 1999.

  • Materials properties for design, Internal document, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam.

  • Joshi, S. G., Pujari, A. S., Kale, R. D. and Sreedhar, B. K., Cavitation studies on a model of primary sodium pump. In Proceedings of FEDSM’02, the 2002 Joint US ASME European Fluids Engineering Summer Conference, Montreal, Canada, 2002.


Abstract Views: 330

PDF Views: 106




  • The History of Liquid Metal Pump Development in India

Abstract Views: 330  |  PDF Views: 106

Authors

R. D. Kale
No. D/9, Runwal Paradise, Bhusari Colony, Pune 411 038, India
B. K. Sreedhar
Sodium Experiments and Hydraulics Division, Fast Reactor Technology Group, Sodium Pumps Section, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, India
K. V. Sreedharan
Sodium Pumps Section, Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, India

Abstract


In a fast breeder reactor, the liquid sodium coolant is circulated through the core using vertical centrifugal pumps. These pumps are critical equipment for reactor operation and they have many unique design features. Indigenous development of pumps is vital for the demonstration and expansion of fast reactor technology which constitutes the critical second stage of our three-stage programme.

Indigenous design and development of vertical centrifugal sodium pumps was taken up more than two decades ago in close collaboration with Indian industry. This article provides an account of the work done in the areas of pump hydraulics, mechanical design and testing, and manufacture.


Keywords


Cavitation, Liquid Metal, Model Testing, Manufacture, Sodium Centrifugal Pump.

References





DOI: https://doi.org/10.18520/cs%2Fv114%2Fi02%2F292-307