Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Transmission and Distribution Losses and Aggregate Technical and Commercial Losses


Affiliations
1 M.Tech, Electrical Power System, Larsen and Toubro, India
2 Saraswati college of Engineering, Mumbai, Maharashtra, India
3 PUSA Institute of Technology, Delhi, India
4 M.Tech, Tool Engineering, Delhi Institute of Tool Engineering, Okhla, India
     

   Subscribe/Renew Journal


This paper presents a simple method to calculate the AT&C losses in residential area. Today most of distribution companies are suffering from high T&D (Transmission and Distribution) losses and AT&C (Aggregate Technical and Commercial) losses. Most of the companies have very high level of AT&C losses. T&D loss gives an approximate value of losses. But AT&C loss gives the accurate data of losses. In this paper we have collected the data from Housing Board Colony Jind (urban area) and calculated the level of losses in that particular Distribution Transformer wise and then suggest loss reduction methods.

Keywords

AT&C Losses, Distr ibution System, DT (Distribution Transformer), Housing Board Colony Jind, Losses, Meter.
User
Notifications

Subscription Login to verify subscription
JOURNAL COVERS
  

  • Bhalla MS. Transmission and distribution losses (Power). Proceedings of the National Conference on Regulation in infrastructure Services; New Delhi. 2000 Nov 14-15.
  • Antmann P. Reducing technical and non-technical losses in the power sector. Washington, DC: World Bank; 2009
  • Available from: http://www.beeindia.in/energy_managers_auditors/ documents/guide_books/3Ch1.pdf
  • Available from: http://electrical-engineering-portal.com/totallossesin-power-distribution-and-transmission-lines-1
  • Pawar R, Singh J. Calculation of T&D Loss % based on 11/0.4 KV substation in a distribution utility. 2012 IEEE 5th Power India Conference2012 Dec19-22.

Abstract Views: 39

PDF Views: 0




  • Transmission and Distribution Losses and Aggregate Technical and Commercial Losses

Abstract Views: 39  |  PDF Views: 0

Authors

Saket Gaurav
M.Tech, Electrical Power System, Larsen and Toubro, India
Sunita Pal
Saraswati college of Engineering, Mumbai, Maharashtra, India
Swati Jain
PUSA Institute of Technology, Delhi, India
Rahul Katna
M.Tech, Tool Engineering, Delhi Institute of Tool Engineering, Okhla, India

Abstract


This paper presents a simple method to calculate the AT&C losses in residential area. Today most of distribution companies are suffering from high T&D (Transmission and Distribution) losses and AT&C (Aggregate Technical and Commercial) losses. Most of the companies have very high level of AT&C losses. T&D loss gives an approximate value of losses. But AT&C loss gives the accurate data of losses. In this paper we have collected the data from Housing Board Colony Jind (urban area) and calculated the level of losses in that particular Distribution Transformer wise and then suggest loss reduction methods.

Keywords


AT&C Losses, Distr ibution System, DT (Distribution Transformer), Housing Board Colony Jind, Losses, Meter.

References





DOI: https://doi.org/10.18311/gjeis%2F2018%2F19938