The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off


The purpose of this study was to determine the optimal design parameters and to indicate which of the design parameters are statistically significant for obtaining a low coefficient of friction (COF) and low wear rate with waste palm oil blended with SAE 40. Thetribology performance was evaluated using a piston-ring-liner contact tester.The design of experiment (DOE) was constructed by using response surface methodology (RSM) to minimize the number of experimental conditions and to develop amathematical model between the key process parameters such as rotational speeds (200 rpm to 300 rpm), volume concentration (0% to 10% waste oil), and applied loads (2 kg to 9 kg). Analysis of variance (ANOVA) test was also carried out to check the adequacy of the empirical models developed. Scanning electron microscopy (SEM) was used to examine the damage features at the worn surface under lubricant contact conditions.
User
Notifications
Font Size