Journal of Geological Society of India (Online archive from Vol 1 to Vol 78)

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Clay Smear Processes in Mechanically Layered Sequences - Results of Water-Saturated Model Experiments With Free Top Surface


Affiliations
1 Structural Geology, Tectonics and Geomechanics, Geological Institute, RWTH Aachen University, Lochnerstrasse 4-20, 52056 Aachen, Germany
2 Bilfinger Berger AG, Group Technology, Carl-Reiss-Platz 1-5, 68165 Mannheim, Germany
     

   Subscribe/Renew Journal


The aim of this study is to improve our knowledge of the processes that lead to clay smear during faulting of a layered sand-clay sequence in an analogue sandbox model. We carefully characterized mechanical properties of the materials used by a series of geotechnical tests. Displacement field was quantified using PIV (Particle Image Velocimetry). The model is water-saturated to allow the deformation of wet clay and sand in one experiment comprising a sand package with a horizontal layer of clay above a predefined rigid basement fault. The thickness and rigidity of the clay layer are the parameters varied in this study. The model shows a range of structures that are related to competence contrast between sand and different clay types. Results show ductile shearing of soft clay with a transition to brittle fracturing of stiff clay accompanied by the formation of rotating clay blocks in the fault zone. Localized deformation is observed through time showing (i) the propagation of one active fault migrating laterally through the sediment package, and (ii) the formation of a stable prism between two or more active faults that gets progressively smaller with minor rotation of the hanging wall fault. Continuous clay smear is observed resulting from the lateral injection of clay as well as from a reworked mixture of sand and clay.

Keywords

Clay Smear, Fault Seal, Mechanical Heterogeneity, Normal Fault, Analogue Sandbox Model.
Subscription Login to verify subscription
User
Notifications
Font Size

  • ADAM, J., URAI, J.L., WIENEKE, B., ONCKEN, O., PFEIFFER, K., KUKOWSKI, N., LOHRMANN, J., HOTH, S., VAN DER ZEE, W., and SCHMATZ, J. (2005) Shear localisation and strain distribution during tectonic faulting-new insights from granular-flow experiments and high-resolution optical image correlation techniques. Jour. Struc.Geol., v.27, pp.283-301.

  • BENSE, V.F. and Person, M.A. (2006) Faults as conduit-barrier systems to fluid flow in siliciclastic sedimentary aquifers, Water Resources Research, v.42, W05421.

  • CARDOZO, N., BHALLA, K., ZEHNDER, A. and ALLMENDINGER, R. (2003) Mechanical models of fault propagation folds and comparison to the trishear kinematic model. Jour. Struc. Geol., v.25, pp.1-18.

  • CLAUSEN, J.A. and GABRIELSEN, R.H. (2002) Parameters that control the development of clay smear at low stress states: an experimental study using ring-shear apparatus. Jour. Struc. Geol., v.24, pp.1569-1586.

  • CLAUSEN, J.A., GABRIELSEN, R.H., JOHNSEN, E. and KORSTGARD, J.A. (2003) Fault architecture and clay smear distribution. Examples from field studies and drained ring-shear experiments. Norsk Geologisk Tidsskrift, v.83, pp.131-146.

  • CLOOS, E. (1955) Experimental analysis of fracture patterns. Geol. Soc. Amer. Bull., v.66, pp.241-253.

  • CLOOS, H. (1930) Zur experimentellen Tektonik - V.Vergleichende Analyse dreier Verschiebungen. Geologische Rundschau, v.21, pp.353-367.

  • EGHOLM, D.G., CLAUSEN, O.R., SANDIFORD,, M., KRISTENSEN, M.B. and KORSTGARD, J.A. (2008) The mechanics of clay smearing along faults. Geology v.36, pp.787-790.

  • EISENSTADT, G. and SIMS, D. (2005) Evaluating sand and clay models; do rheological differences matter? Jour. Struc. Geol., v.27, pp.1399-1412.

  • FULLJAMES, J.R., ZIJERVELD, L.J.J. and FRANSSEN, R.C.M.W. (1997) Fault seal processes: Systematic analysis of fault seals over geological and production time scales. In Moeller-Pedersen, and A.G. Koester, Eds. Hydrocarbon Seals, 7, pp.51-59.

  • GUDEHUS, G. and NUBEL, K. (2004) Evolution of shear bands in sand. Geotechnique, v.54, pp.187-201.

  • GUDEHUS, G., and KARCHER, C. (2007) Hypoplastic simulation of normal faults without and with clay smears. Jour. Struc. Geol., v.29, pp.530-540.

  • HAGE, B. and WERTHER, J. (1997) The guarded capacitance probe - a tool for the measurement of solids flow patterns in laboratory and industrial fluidized bed combustors. Powder Technology, v.93, pp.235-245.

  • HOLLAND, M., URAI, J.L. and MARTEL, S. (2006) The internal structure of fault zones in basaltic sequences. Earth Planet. Sci. Lett., v.248, pp.286-300.

  • HORSFIELD, W.T. (1977) An experimental approach to basementcontrolled faulting. Geologie en Mijnbouw, v.56, pp.363-370.

  • KARAKOUZIAN, M. and HUDYMA, N. (2002) A new apparatus for analog modeling of clay smears. Jour. Struc. Geol., v.24, pp.905-912.

  • LEHNER, F.K. and PILAAR, W.F. (1997) The emplacement of clay smears in synsedimentary normal faults: inference from field observations near Frechen, Germany. In: P. Pedersen (Ed.), Hydrocarbon seals: importance for petroleum exploration and production. Elsevier, pp.39-50.

  • LINDANGER, R, OYGAREN, M., GABRIELSEN, R.H., MJELDE,R., RANDEN,T. and TJOSTHEIM, B.A., (2004) Analogue (plaster) modelling and synthetic seismic representation of hanging wall fault blocks above of ramp flat ramp faults. First Break, v.22, pp.22-30.

  • LINDSAY, N.G., MURPHY, F.C.,WALSH, J.J. and WATTERSON, J. (1993) Outcrop studies of shale smears on fault surfaces. Spec. Publ. Internat. Assoc. Sedimentologists, v.15, pp.113-123.

  • LIU, Z., ZHENG, Y., JIA, L. and ZHANG, Q. (2005) Study of bubble induced flow structure using PIV. Chemical Engineering Sci., v.60, pp.3537-3552.

  • MANDL, G. (1988) Mechanics of tectonic faulting; models and basic concepts Developments in structural geology. Elsevier Sci. Publ., Amsterdam, Netherlands.

  • MANDL, G. (2000) Faulting in brittle rocks. Springer, London. MANDL, G., JONG, L.N.J.D. and MALTHA,A. (1977) Shear Zones in Granular Material - An Experimental Study of their Structure and Mechanical Genesis. Rock Mechanics Felsmechanik Mécanique des Roches, v.9, pp.95-144.

  • MEDWEDEFF, D.A. and KRANTZ, R.W. (2002) Kinematic and analog modeling of 3-D extensional ramps: observations and a new 3-D deformation model. Jour. Struc. Geol., v.24, pp.763-772.

  • NEWBERY, A.P., RAYMENT, T. and GRANT, P.S. (2004) A particle image velocimetry investigation of in-flight and deposition behavior of steel droplets during electric arc spray forming. Materials Science and Engineering A, v.383, pp.137-145.

  • NUBEL, K. (2002) Experimental and Numerical Investigation of Shear Localization in Granular Material, PhD, Karlsruhe, p.159.

  • NUBEL, K. and WEITBRECHT,V. (2002) Visualization of Localization in Grain Skeletons with Particle Image Velocimetry. Jour. Testing and Eval., v.30, pp.322-328.

  • PATTON, T.L. and FLETCHER, R.C. (1995) Mathematical blockmotion model for deformation of a layer above a buried fault of arbitrary dip and sense of slip. Jour. Struc. Geol., v.17, pp.1455-1472.

  • PEACOCK, D.C.P and SANDERSON, D.J. (1992) Effects of layering and anisotropy on fault geometry. Jour. Geol. Soc. London, v.149, pp.793-802.

  • RICHARD, P. and COBBOLD, P. (1990) Experimental insights into partitioning of fault motions in continental convergent wrench zones. Annales Tectonicae, v.4, pp.35-44.

  • RICHARD, P. and KRANTZ, R.W. (1991) Experiments on fault reactivation in strike-slip mode. Tectonophysics, v.188, pp.177-131.

  • SCHOPFER, M.P.J., CHILDS, C. and WALSH, J.J. (2006) Localisation of normal faults in multilayer sequences. In: C. Childs and J.J. Walsh (Eds.), Jour. Struc. Geol., v.28, pp.816-833.

  • SCHREURS, G. , BUITER, S.J.H., BOUTELIER, D., CORTI, G., COSTA, E., CRUDEN,A.R., DANIEL, J.-M., HOTH, S., KOYI, H.A., KUKOWSKI, N., LOHRMANN, J., RAVAGLIA, A., SCHLISCHE, R.W., WITHJACK, M.O., YAMADA, Y., CAVOZZI, C., DEL VENTISETTE, C., ELDER BRADY, J.A., HOFFMANN-ROTHE,A., MENGUS, J.-M., MONTANARI, D. and NILFOROUSHAN, F. (2006) Analogue benchmarks of shortening and extension experiments. In: S.J.H. Buiter and G. Schreurs (Eds.), Analogue and numerical modeling of crustal-scale processes. Geol. Soc. Spec. Publ., v.253, pp.1-27.

  • STEINGART, D.A. and EVANS, J.W. (2005) Measurements of granular flows in two-dimensional hoppers by particle image velocimetry. Part I: experimental method and results. Chemical Engg. Sci., v.60, p.1043.

  • VAN DER ZEE, W. (2002) Dynamics of fault gouge development in Layers sand-clay sequences. Shaker Verlag,Aachen.

  • VAN DER ZEE, W. and URAI, J. (2005) Processes of normal fault evolution in a siliciclastic sequence: a case study from Miri, Sarawak, Malaysia. Jour. Struc. Geol., v.27(12), pp.2281-2300.

  • VAN DER ZEE, W., URAI, J.L. and RICHARD, P.D. (2003) Lateral clay injection into normal faults. GeoArabia, v.8(3), pp.501-522.

  • VAN MIER, J.G.M. (1986) Multiaxial strain-softening of concrete. Materials and Structures, v.19, pp.179-190.

  • VROLIJK, P. and VAN DER PLUIJM, B.A. (1999) Clay gouge. Jour. Struc. Geol., v.21, pp.1039-1048.

  • WEBER, K.J., MANDL, G., PILAAR,W.F., LEHNER, F.K. and PRECIOUS, R.G. (1978) The role of faults in hydrocarbon migration and trapping in Nigerian growth fault structures. Proc. 10th Annual Offshore Technology Conference, Houston, Texas 4, pp.2643-2653.

  • WOLF, H., KONIG, D. and TRIANTAFYLLIDIS, T. (2003) Experimental Investigation of shear band patterns in granular material. Jour. Struc. Geol., v.25, pp.1229-1240.


Abstract Views: 194

PDF Views: 0




  • Clay Smear Processes in Mechanically Layered Sequences - Results of Water-Saturated Model Experiments With Free Top Surface

Abstract Views: 194  |  PDF Views: 0

Authors

Joyce Schmatz
Structural Geology, Tectonics and Geomechanics, Geological Institute, RWTH Aachen University, Lochnerstrasse 4-20, 52056 Aachen, Germany
Marc Holland
Structural Geology, Tectonics and Geomechanics, Geological Institute, RWTH Aachen University, Lochnerstrasse 4-20, 52056 Aachen, Germany
Steffen Giese
Bilfinger Berger AG, Group Technology, Carl-Reiss-Platz 1-5, 68165 Mannheim, Germany
Wouter Van Der Zee
Structural Geology, Tectonics and Geomechanics, Geological Institute, RWTH Aachen University, Lochnerstrasse 4-20, 52056 Aachen, Germany
Janos L. Urai
Structural Geology, Tectonics and Geomechanics, Geological Institute, RWTH Aachen University, Lochnerstrasse 4-20, 52056 Aachen, Germany

Abstract


The aim of this study is to improve our knowledge of the processes that lead to clay smear during faulting of a layered sand-clay sequence in an analogue sandbox model. We carefully characterized mechanical properties of the materials used by a series of geotechnical tests. Displacement field was quantified using PIV (Particle Image Velocimetry). The model is water-saturated to allow the deformation of wet clay and sand in one experiment comprising a sand package with a horizontal layer of clay above a predefined rigid basement fault. The thickness and rigidity of the clay layer are the parameters varied in this study. The model shows a range of structures that are related to competence contrast between sand and different clay types. Results show ductile shearing of soft clay with a transition to brittle fracturing of stiff clay accompanied by the formation of rotating clay blocks in the fault zone. Localized deformation is observed through time showing (i) the propagation of one active fault migrating laterally through the sediment package, and (ii) the formation of a stable prism between two or more active faults that gets progressively smaller with minor rotation of the hanging wall fault. Continuous clay smear is observed resulting from the lateral injection of clay as well as from a reworked mixture of sand and clay.

Keywords


Clay Smear, Fault Seal, Mechanical Heterogeneity, Normal Fault, Analogue Sandbox Model.

References