International Journal of Processing and Post harvest Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Determination of Physical Properties of Onions (Arka kirthiman)


Affiliations
1 Department of Farm Machinery and Power, College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
2 College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
     

   Subscribe/Renew Journal


India produces about 13 per cent of total worlds onion product and ranked second after China. Onion is grown in an area of 1.0 mha in India with the production of 15.1 million tonnes and productivity of 14.2 tonnes/ hectare. Broad casting method of growing onion seeds results in the higher amount of seed rate, non-uniform distribution of seeds, poor bulb maturity and higher nutrient competition. To overcome these constraints there is a need to develop animal drawn onion seeder, which is more adaptable for small scale farmers under rainfed cultivation with reasonable cost of operation. To develop the desired seed metering unit of animal drawn seeder some of the onion seed physical properties viz., seed dimensions, weight and mechanical properties were determined. The length, width and thickness of Artthi Kirthiman onion variety were in the range of 2.50-2.95 mm, 1.75-2.24 mm and 1.33-1.53 mm, respectively. Geometric mean diameter, spherisity, weight, bulk density, true density, porosity and angle of repose were found to be 1.96 mm, 0.71 cm, 3.69 g, 520 kg/m³, 975.4 kg/m³, 48 per cent and 48.69°, respectively. The Co-efficient of static friction on glass and mild steel were found to be 0.521 and 0.556, respectively.

Keywords

Animal Drawn Seeder, Angle of Repose, Moisture Content, Static Friction.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Bahnasawy, A.H., Haddad, Z.A., Ansary, M.Y. and Sorour, H.M. (2004). Physical and mechanical properties of some Egyptian onion cultivars. J. Food Engg., 62 : 255–261.

  • Carman, K. (1996). Some physical properties of lentil seeds. J. Agric. Engg. Res., 63(6) : 87-92.

  • Chhina, R.S. and Sharma, A.D. (2011). Studies on physical properties of onion seeds (Allium cepa). Prog. Hort., 43 (1): 76-80.

  • Nimkar, P.M., Dipali, S., Mandwe and Dudhe, M.R. (2005). Physical properties of moth gram. Biosystem Engg., 91(2):183-189.

  • Ramya, M. (2006). Studies on male sterility, harvest and threshing methods on seed quality in onion (Allium cepa L.). Ph. D. Thesis, University of Agricultural Sciences, Bangalore, KARNATAKA (INDIA).

  • Saraswathi, K.M. (2000). Studies on male sterility of onion. M.Sc. Thesis, University of Agricultural Sciences, Division of Horticulture, Bangalore, KARNATAKA (INDIA).

  • Vijaya Rani, Sharma, T.R. and Singh, Narendra (2002). Testing and evaluation of vegetable seed extractor for brinjal (Solanum melongena). Horticultural Science Haryana Agricultural University J. Res., 30: 1/2, 19-24.

  • Waziri, A.N. and Mittal, J.P. (1983). Design related physical properties of selected agriculture products. Agric. Mechanization in Asia, Africa & Latin America, 14 (1): 59-62.

  • Yalcin, I., Cetin, M. and Ozarslan, C. (2009). Physical properties of onion (Allium cepa L.) seed. Asian J. Chem., 21(2): 1341-1349.


Abstract Views: 404

PDF Views: 0




  • Determination of Physical Properties of Onions (Arka kirthiman)

Abstract Views: 404  |  PDF Views: 0

Authors

B. Sunitha
Department of Farm Machinery and Power, College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
G. Sujatha
Department of Farm Machinery and Power, College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
B. Girish
Department of Farm Machinery and Power, College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
B. Raj Kiran
Department of Farm Machinery and Power, College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India
M. V. Ramana
College of Agricultural Engineering, Madakasira, Anantapur (DT.) (A.P.), India

Abstract


India produces about 13 per cent of total worlds onion product and ranked second after China. Onion is grown in an area of 1.0 mha in India with the production of 15.1 million tonnes and productivity of 14.2 tonnes/ hectare. Broad casting method of growing onion seeds results in the higher amount of seed rate, non-uniform distribution of seeds, poor bulb maturity and higher nutrient competition. To overcome these constraints there is a need to develop animal drawn onion seeder, which is more adaptable for small scale farmers under rainfed cultivation with reasonable cost of operation. To develop the desired seed metering unit of animal drawn seeder some of the onion seed physical properties viz., seed dimensions, weight and mechanical properties were determined. The length, width and thickness of Artthi Kirthiman onion variety were in the range of 2.50-2.95 mm, 1.75-2.24 mm and 1.33-1.53 mm, respectively. Geometric mean diameter, spherisity, weight, bulk density, true density, porosity and angle of repose were found to be 1.96 mm, 0.71 cm, 3.69 g, 520 kg/m³, 975.4 kg/m³, 48 per cent and 48.69°, respectively. The Co-efficient of static friction on glass and mild steel were found to be 0.521 and 0.556, respectively.

Keywords


Animal Drawn Seeder, Angle of Repose, Moisture Content, Static Friction.

References