Current Science

Open Access Open Access  Restricted Access Subscription Access

Design and Evaluation of a Pneumatic Metering Mechanism for Power Tiller Operated Precision Planter


Affiliations
1 Central Institute of Agricultural Engineering, Nabibagh, Bhopal 462 038, India
2 Department of Agricultural Engineering, Triguna Sen School of Technology, Silchar 788 001, India
3 College of Agricultural Engineering and Technology, Anand Agricultural University, Godhra 389 001, India
4 ICAR Research Complex for NEH Region, Umiam 793 103, India
 

Power tiller is the most common prime mover in medium and marginal farms due to its light weight, compact design and low cost. Many attachments for power tiller have been developed except for precision pneumatic planter which is necessary to plant irregular, small and expensive seeds. In the present work, a pneumatic seed metering mechanism was designed for the power tiller operated 3-row precision planter. It was tested for planting soybean, pigeon pea and corn seeds at 20 cm spacing. The best design and operating parameters of the modular seed metering device were identified by conducting experiments on the sticky belt test stand considering various performance indices on the basis of pareto dominance criterion. The seed metering disc having 8 holes of 3.5 mm diameter on pitch circle diameter of 116 mm and operated at 0.11 ms–1 peripheral speed and 6 kPa suction were found to be the best combination of design and operating parameters for the precise metering of seeds. More than 67% of the seeds got distributed in the range of 15–20 cm spacing.

Keywords

Pareto Dominance, Pneumatic Seed Metering, Power Tiller, Precision Planter.
User
Notifications
Font Size

  • Lan, Y., Kocher, M. F. and Smith, J. A., Opto-electronic sensor system for laboratory measurement of planter seed spacing with small seeds. J. Agric. Eng. Res., 1999, 72(1), 119–127.

  • Panning, J. W., Kocher, M. F., Smith, J. A. and Kachman, S. D., Laboratory and field testing of seed spacing uniformity for sugarbeet planters. Appl. Eng. Agric., 2000, 16(1), 7–13.

  • Singh, R. C., Singh, G. and Saraswat, D. C., Optimisation of design and operational parameters of a pneumatic seed metering device for planting cottonseeds. Biosyst. Eng., 2005, 92(4), 429– 438.

  • Parish, R., Bergeron, P. and Bracy, R., Comparison of vacuum and belt seeders for vegetable planting. Trans. ASAE, 1991, 7(5), 537– 540.

  • Mandal, S. and Kumar, G. V. P., Forward and reverse mapping of extreme learning machine model of a precision planter. In International Symposium on Advanced Computing and Communication (ISACC), IEEE, 2015, pp. 65–70.

  • St Jack, D., Hesterman, D. C. and Guzzomi, A. L., Precision metering of Santalum spicatum (Australian Sandalwood) seeds. Biosyst. Eng., 2013, 115(2), 171–183.

  • Karayel, D., Barut, Z. B. and Özmerzi, A., Mathematical modelling of vacuum pressure on a precision seeder. Biosyst. Eng., 2004, 87(4), 437–444.

  • Zhan, Z., Yaoming, L., Jin, C. and Lizhang, X., Numerical analysis and laboratory testing of seed spacing uniformity performance for vacuum-cylinder precision seeder. Biosyst. Eng., 2010, 106(4), 344–351.

  • Tiwari, P. S. and Gite, L. P., Physiological responses during operation of a rotary power tiller. Biosyst. Eng., 2002, 82(2), 161–168.

  • Sahay, C. S., Thomas, E. V. and Satapathy, K. K., Performance evaluation of a novel power-tiller-operated oscillatory tillage implement for dry land tillage. Biosyst. Eng., 2009, 102(4), 385– 391.

  • Narang, S. and Varshney, A. C., Draftability of a 8.95 kW walking tractor on tilled land. J. Terramech., 2006, 43(4), 395–409.

  • Kathirvel, K., Reddy, A., Manian, R. and Senthilkumar, T., Performance evaluation of planters for cotton crop. AMA-Agric. Mech. Asia. Af., 2005, 36(1), 61.

  • Anantachar, M., Kumar, P. G. and Guruswamy, T., Neural network prediction of performance parameters of an inclined plate seed metering device and its reverse mapping for the determination of optimum design and operational parameters. Comput. Electron. Agric., 2010, 72(2), 87–98.

  • Yazgi, A. and Değirmencioğlu, A., Optimization of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosyst. Eng., 2007, 97(3), 347–356.

  • Deb, K., Pratap, A., Agarwal, S. and Meyarivan, T. A., A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans. Evol. Comp., 2002, 6(2), 182–197.

  • Önal, İ., Değirmencioğlu, A. and Yazgi, A., An evaluation of seed spacing accuracy of a vacuum type precision metering unit based on theoretical considerations and experiments. Turk. J. Agric. For., 2012, 36(2), 133–144.

  • Mandal, S., Roy, S. and Tanna, H., A low-cost image analysis technique for seed size determination. Curr. Sci., 2012, 103(12), 1401–1403.

  • Barut, Z. B. and Özmerzi, A., Effect of different operating parameters on seed holding in the single seed metering unit of a pneumatic planter. Turk. J. Agric. For., 2004, 28(6), 435–441.

  • Coello, C. A., A comprehensive survey of evolutionary-based multi-objective optimization techniques. Knowl. Info. Syst., 1999, 1(3), 269–308.


Abstract Views: 284

PDF Views: 84




  • Design and Evaluation of a Pneumatic Metering Mechanism for Power Tiller Operated Precision Planter

Abstract Views: 284  |  PDF Views: 84

Authors

Sandip Mandal
Central Institute of Agricultural Engineering, Nabibagh, Bhopal 462 038, India
G. V. Prasanna Kumar
Department of Agricultural Engineering, Triguna Sen School of Technology, Silchar 788 001, India
Hetal Tanna
College of Agricultural Engineering and Technology, Anand Agricultural University, Godhra 389 001, India
Arvind Kumar
ICAR Research Complex for NEH Region, Umiam 793 103, India

Abstract


Power tiller is the most common prime mover in medium and marginal farms due to its light weight, compact design and low cost. Many attachments for power tiller have been developed except for precision pneumatic planter which is necessary to plant irregular, small and expensive seeds. In the present work, a pneumatic seed metering mechanism was designed for the power tiller operated 3-row precision planter. It was tested for planting soybean, pigeon pea and corn seeds at 20 cm spacing. The best design and operating parameters of the modular seed metering device were identified by conducting experiments on the sticky belt test stand considering various performance indices on the basis of pareto dominance criterion. The seed metering disc having 8 holes of 3.5 mm diameter on pitch circle diameter of 116 mm and operated at 0.11 ms–1 peripheral speed and 6 kPa suction were found to be the best combination of design and operating parameters for the precise metering of seeds. More than 67% of the seeds got distributed in the range of 15–20 cm spacing.

Keywords


Pareto Dominance, Pneumatic Seed Metering, Power Tiller, Precision Planter.

References





DOI: https://doi.org/10.18520/cs%2Fv115%2Fi6%2F1106-1114